我正在使用 Python 中的频谱包，使用多锥方法来计算样本的功率谱密度 (PSD)（参见http://pyspectrum.readthedocs.io/en/latest/_modules/spectrum/mtm.html ） 60 个磁力计局部磁北分量读数，每分钟采样一次，以纳特斯拉为单位测量。
我的目标是仅查看 1.5-6mHz 频段中的 PSD，因为这是唯一对我的研究重要的频段。
使用自适应方法运行函数（默认 NFFT=256，NW=1.4，默认 k）我得到以下图
我的理解是 y 轴的单位 (nT)^2/Hz 很好，但是我如何在 x 轴上获得感兴趣的特定 mHz 频带？我最初认为 x 轴以 Hz 为单位，但是对于我选择的任何 NFFT 值，图表看起来都一样，但只是从 0 到 x 轴中的 NFFT 值。
有谁知道我如何在 1.5 - 6 mHz 范围内找到功率（或者如果我完全走错了路？
谢谢！
如果它在这里有帮助是函数正在做什么的代码（对于它引用的其他函数，请参阅我上面发布的链接，我刚刚发布了这个特定的函数，因为它可以更深入地了解正在发生的事情（使用 np.FFT .FFT 例如）：
def pmtm(x, NW=None, k=None, NFFT=None, e=None, v=None, method='adapt', show=False):
"""Multitapering spectral estimation
:param array x: the data
:param float NW: The time half bandwidth parameter (typical values are
2.5,3,3.5,4). Must be provided otherwise the tapering windows and
eigen values (outputs of dpss) must be provided
:param int k: uses the first k Slepian sequences. If *k* is not provided,
*k* is set to *NW*2*.
:param NW:
:param e: the window concentrations (eigenvalues)
:param v: the matrix containing the tapering windows
:param str method: set how the eigenvalues are used. Must be
in ['unity', 'adapt', 'eigen']
:param bool show: plot results
:return: Sk (complex), weights, eigenvalues
Usually in spectral estimation the mean to reduce bias is to use tapering window.
In order to reduce variance we need to average different spectrum. The problem
is that we have only one set of data. Thus we need to decompose a set into several
segments. Such method are well-known: simple daniell's periodogram, Welch's method
and so on. The drawback of such methods is a loss of resolution since the segments
used to compute the spectrum are smaller than the data set.
The interest of multitapering method is to keep a good resolution while reducing
bias and variance.
How does it work? First we compute different simple periodogram with the whole data
set (to keep good resolution) but each periodgram is computed with a different
tapering windows. Then, we average all these spectrum. To avoid redundancy and bias
due to the tapers mtm use special tapers.
.. plot::
:width: 80%
:include-source:
from spectrum import data_cosine, dpss, pmtm
data = data_cosine(N=2048, A=0.1, sampling=1024, freq=200)
# If you already have the DPSS windows
[tapers, eigen] = dpss(2048, 2.5, 4)
res = pmtm(data, e=eigen, v=tapers, show=False)
# You do not need to compute the DPSS before end
res = pmtm(data, NW=2.5, show=False)
res = pmtm(data, NW=2.5, k=4, show=True)
.. versionchanged:: 0.6.2
APN modified method to return each Sk as complex values, the eigenvalues
and the weights
"""
assert method in ['adapt','eigen','unity']
N = len(x)
# if dpss not provided, compute them
if e is None and v is None:
if NW is not None:
[tapers, eigenvalues] = dpss(N, NW, k=k)
else:
raise ValueError("NW must be provided (e.g. 2.5, 3, 3.5, 4")
elif e is not None and v is not None:
eigenvalues = e[:]
tapers = v[:]
else:
raise ValueError("if e provided, v must be provided as well and viceversa.")
nwin = len(eigenvalues) # length of the eigen values vector to be used later
# set the NFFT
if NFFT==None:
NFFT = max(256, 2**nextpow2(N))
Sk_complex = np.fft.fft(np.multiply(tapers.transpose(), x), NFFT)
Sk = abs(Sk_complex)**2
# si nfft smaller thqn N, cut otherwise add wero.
# compute
if method in ['eigen', 'unity']:
if method == 'unity':
weights = np.ones((nwin, 1))
elif method == 'eigen':
# The S_k spectrum can be weighted by the eigenvalues, as in Park et al.
weights = np.array([_x/float(i+1) for i,_x in enumerate(eigenvalues)])
weights = weights.reshape(nwin,1)
elif method == 'adapt':
# This version uses the equations from [2] (P&W pp 368-370).
# Wrap the data modulo nfft if N > nfft
sig2 = np.dot(x, x) / float(N)
Sk = abs(np.fft.fft(np.multiply(tapers.transpose(), x), NFFT))**2
Sk = Sk.transpose()
S = (Sk[:,0] + Sk[:,1]) / 2 # Initial spectrum estimate
S = S.reshape(NFFT, 1)
Stemp = np.zeros((NFFT,1))
S1 = np.zeros((NFFT,1))
# Set tolerance for acceptance of spectral estimate:
tol = 0.0005 * sig2 / float(NFFT)
i = 0
a = sig2 * (1 - eigenvalues)
# converges very quickly but for safety; set i<100
while sum(np.abs(S-S1))/NFFT > tol and i<100:
i = i + 1
# calculate weights
b1 = np.multiply(S, np.ones((1,nwin)))
b2 = np.multiply(S,eigenvalues.transpose()) + np.ones((NFFT,1))*a.transpose()
b = b1/b2
# calculate new spectral estimate
wk=(b**2)*(np.ones((NFFT,1))*eigenvalues.transpose())
S1 = sum(wk.transpose()*Sk.transpose())/ sum(wk.transpose())
S1 = S1.reshape(NFFT, 1)
Stemp = S1
S1 = S
S = Stemp # swap S and S1
weights=wk
if show is True:
from pylab import semilogy
if method == "adapt":
Sk = np.mean(Sk * weights, axis=1)
else:
Sk = np.mean(Sk * weights, axis=0)
semilogy(Sk)
return Sk_complex, weights, eigenvalues