4

I've written a programm that Outputs 2 different sounds, taken from 2 Potientiometers.

The issue with that is, that a sound is generated by turning the beeper on and off with a delay in it, which is basicly the value of the potentiometer.

But the higher the frequency is, the lower is the time the sound is played and i want that the time the sound is played is unattached to its frequency.

So i decided to use a timer.

Planned is the following structure:

while(timer0counter > 0)
    while(timer2counter > 0)
        output on
    while(timer2counter > 0)
        output off

As you see, this should give a frequency over a specified time. The implementation so far looks as follows (PORTB is the beeper)(This is only for one Sound):

mainloop:
    ldi r27,250;The value of one Potientiometer, here a static value

    ldi r22,255 
    mov r23,r27
    loop:

          ldi r16,4
          out PORTB,r16

          tst r23
          brne loop

          mov r23,r27

          inner:
                ldi r16,0
                out PORTB,r16

                tst r23
                brne inner

          tst r22
          brne loop

rjmp mainloop

While the timer overflow functions are:

tmr0overflow:
  tst r22
  breq skip0
  sub r22,1
  skip0:
reti

tmr2overflow:
      tst r23
      breq skip2
      sub r23,1
      skip2:
reti

Timer initialization:

ldi r16,5
out TCCR0,r16
ldi r16,2
out TCCR2,r16

ldi r16,(1<<TOIE0) | (1<<TOIE2) 
out TIMSK,r16

I've also set the interrupt vectors for T2OVF, T0OVF and enabled interrupts in general.

But it doenst work, the output seems like random. Whats wrong with it ?

4

1 回答 1

1 
            ;PORTC  0 = INPUT
            ;POT. 1[C0 / ADC0]
            cbi     DDRC,0
            cbi     DDRC,1
            ;PULLUP
            sbi     DDRC,0
            sbi     DDRC,1

上拉不是通过 DDR 设置的，而是通过 PORT 设置的。从输出读取时输入未确定。

于 2013-06-18T15:07:00.557 回答