我有 2 个电路，均由双七段显示器和 pic16f684（如下所示）组成，第一个电路使用提供的代码生成随机数 1-26。字母部分是相同的电路，但移除了一个晶体管，以禁用一侧。
/*
* File: main.c
* Original Code Creator: dan1138
* Target: PIC16F684
* Compiler: XC8 v2.20
* IDE: MPLABX v5.25
*
* Description:
*
* Created on July 21, 2020, 3:45 PM
*
* PIC16F684
* +------------:_:------------+
* GND -> 1 : VDD VSS : 14 <- 5v0
* SEG_a_DRIVE <> 2 : RA5/T1CKI PGD/AN0/RA0 : 13 <> DIGIT_DRIVE_2
* SW2 <> 3 : RA4/AN3 PGC/AN1/RA1 : 12 <> DIGIT_DRIVE_1
* SW1 -> 4 : RA3/VPP AN2/RA2 : 11 <>
* SEG_b_DRIVE <> 5 : RC5/CPP1 AN4/RC0 : 10 <> SEG_g_DRIVE
* SEG_c_DRIVE <> 6 : RC4/C2OUT AN5/RC1 : 9 <> SEG_f_DRIVE
* SEG_d_DRIVE <> 7 : RC3/AN7 AN6 RC2 : 8 <> SEG_e_DRIVE
* +---------------------------:
* DIP-14
*/
// CONFIG --- Configuration Word --- START
#pragma config FOSC = INTOSCIO
#pragma config WDTE = OFF
#pragma config PWRTE = OFF
#pragma config MCLRE = OFF
#pragma config CP = OFF
#pragma config CPD = OFF
#pragma config BOREN = OFF
#pragma config IESO = OFF
#pragma config FCMEN = OFF
// CONFIG --- Configuration Word --- END
#include <xc.h>
#include <stdlib.h>
/* Oscillator frequency we will select with the OSCCON register */
#define _XTAL_FREQ (4000000ul)
/*
* Segment locations
* of an LED display
* ---a---
* : :
* f b
* : :
* ---g---
* : :
* e c
* : :
* ---d---
*/
const unsigned char LEDDigit[] = {
// abcdefg, Segment on = 0
0b00000001, // "0"
0b01001111, // "1"
0b00010010, // "2"
0b00000110, // "3"
0b01001100, // "4"
0b00100100, // "5"
0b00100000, // "6"
0b00001111, // "7"
0b00000000, // "8"
0b00001100, // "9"
0b00001000, // "A"
0b01100000, // "b"
0b00110001, // "C"
0b01000010, // "d"
0b00110000, // "E"
0b00111000 // "F"
};
void main(void)
{
unsigned char DisplayValue, DisplayLED, DigitSegments;
unsigned char LoopCount;
unsigned int Temp;
PORTA = 0;
PORTC = 0;
CMCON0 = 7; // Turn off Comparators
ANSEL = 0; // Turn off ADC
__delay_ms(500); // wait for ICD before making PGC and PGD outputs;
TRISA = 0b011100; // RA5, RA1, RA0 are outputs
TRISC = 0b000000;
OPTION_REGbits.nRAPU = 0; // Enable weak pull-up on PORTA
WPUA = 0; // Turn off all pull-ups
WPUAbits.WPUA4 = 1; // Turn on RA4 pull-up
DisplayValue = 0; // Start Displaying at 0x00
DisplayLED = 0; // Display the 1s first
LoopCount = 0;
srand(0x1234);
for(;;)
{
PORTC = 0xFF; // turn off all segment drivers
PORTA = 0xFF; // and digit drivers
if (1 == (DisplayLED & 1))
{
DigitSegments = LEDDigit[(DisplayValue >> 4) & 0x0F];
if(DigitSegments & 0b1000000)
{
PORTA = 0b111110; // turn on Digit driver 2
}
else
{
PORTA = 0b011110; // turn on Digit driver 2 and SEG_a_DRIVER
}
}
else
{
DigitSegments = LEDDigit[DisplayValue & 0x0F];
if(DigitSegments & 0b1000000)
{
PORTA = 0b111101; // turn on Digit driver 1
}
else
{
PORTA = 0b011101; // turn on Digit driver 1 and SEG_a_DRIVER
}
}
PORTC = DigitSegments; // turn on segment drivers b to g
DisplayLED++; // select next digit
__delay_ms(10); // Show digit for 10 milliseconds
if(0 == PORTAbits.RA3) // is SW1 pressed?
{
LoopCount++;
if(LoopCount == 1)
{
// Display a new random value every 500 milliseconds
Temp = rand() & 0xFFu; // put random value in range of 0 to 255 and treat is as a fraction in range (0/256) <= value < (255/256)
Temp = (Temp * 26u + 0x100u) >> 8; // Use tricky math to make a random number in the range from 1 to 56
DisplayValue = (Temp / 10u) << 4; // Extract the ten's digit
DisplayValue = DisplayValue | (Temp % 10); // Extract the one's digit
}
if(LoopCount >= 50)
{
LoopCount = 0;
}
}
else
{
LoopCount = 0;
}
if(0 == PORTAbits.RA4) // is SW2 pressed?
{
DisplayValue = 0; // Reset display value to zero
LoopCount = 0;
}
}
}
我的目标是使用修改后的字母在第二个七段显示器上生成相应的字母。但是，我无法弄清楚如何做到这一点。我最初的想法是使用修改后的 LEDDigits[] 将温度值输出到第二个 pic16f684；
const unsigned char LEDDigit[] = {
// abcdefg, Segment on = 0
0b01111110, //"-"
0b00001000, // "A"
0b01100000, // "b"
0b00110001, // "C"
0b01000010, // "d"
0b00110000, // "E"
0b00111000, // "F"
0b00100001, // "G"
0b01001000, // "H"
0b01111001, // "I"
0b01000011, // "J"
0b00101000, // "Modified K"
0b01110001, // "L"
0b00010101, // "Modified M"
0b01101010, // "n"
0b01100010, // "o"
0b00011000, // "P"
0b00001100, // "q"
0b01111010, // "r"
0b00100100, // "S"
0b01110000, // "t"
0b01100011, // "u"
0b01010101, // "Modified V"
0b01000000, // "Modified W"
0b00110110, // "Modified X"
0b01000100, // "y"
0b00010010 // "Z"
};
但我不相信我可以只输出那个数字。如何在一个双显示器上显示数字（1-26），在另一个显示器上显示相应的字母。
我可以将第二个七段显示器添加到数字电路中，将其晶体管设置为 RA2，并让它同时显示字母吗？这将如何工作？