1

我想让我的第一个在 stm32 上使用 i2c 的应用程序与 ssd1306 一起使用。“命令模式”下的所有通信都在工作，并且显示响应 1 字节命令。我认为当一个包装中的字节数增加时，问题出在“数据模式”中。

通过 i2c 发送数据的基本功能

void i2c1_send(uint8_t address, uint8_t *command, uint16_t length)
{
    while(I2C1->SR2 & I2C_SR2_BUSY);
    I2C1->CR1 |= I2C_CR1_START;
    while(!(I2C1->SR1 & I2C_SR1_SB));
    I2C1->DR=address;                   //7 bit address in this byte is already shifted left by one
    while(!(I2C1->SR1 & I2C_SR1_ADDR)|!(I2C1->SR2));    //waiting for address match

    for (uint16_t i=0;i<length;i++)
    {
        I2C1->DR=command[i];                    //filling buffer with command or data
        while(!(I2C1->SR1 & I2C_SR1_BTF));      //from RM: Note: The BTF bit is not set after a NACK reception
                                                //i think i need here to wait for ack response
    }
    I2C1->CR1 |= I2C_CR1_STOP;
}

发送命令的功能这工作正常，它在没有开始/停止的情况下发送总结 3 个字节的数据 -[startBit, Address, ControlByte, CommandByte, stopBit]

和代码：

void ssd1306_sendCommand(uint8_t toSend_u8){
    uint8_t frame_u8[2] = {0, toSend_u8};
    i2c1_send((OLED_ADDRESS<<1)|0, frame_u8,2); //sending frame
}

命令模式下的控制字节为 0x0，根据 ssd1306 数据表，稍后将显示在图像上。

finally发送数据的函数，它不起作用

void ssd1306_sendData(uint8_t* toSend_u8p,uint8_t data_lenght)
{
    uint8_t frame_u8[256];  //making frame buffor to send
    frame_u8[0] = 0x40;     //control byte with D/C = 1 ---> 0b01000000 = 0x40

    for(uint16_t i=0; i <= data_lenght; i++){
        frame_u8[1+i] = toSend_u8p[i];
    }

    i2c1_send((OLED_ADDRESS<<1)|0, frame_u8, data_lenght+1);  //data_lenght+1 because we have additional control byte
}

i2c 数据格式 drom ssd1306 数据表：

图像

完整的 ssd1306 数据表

我的 i2c 初始化 fx

void i2c1_init()
{
    RCC->APB2ENR |= RCC_APB2ENR_IOPBEN; //enabling gpios
    RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; //clock for i2c1
    __DSB();__DSB();__DSB();

    //i2c pins : PB6 - SCL ; PB7 - SDA

    GPIOB->CRL &= ~(GPIO_CRL_CNF6|GPIO_CRL_CNF7);
    GPIOB->CRL |= GPIO_CRL_CNF6_1|GPIO_CRL_CNF7_1|
                    GPIO_CRL_MODE7|GPIO_CRL_MODE6;      //AF function push pull for gpios

    I2C1->CR2 |= 50;
    I2C1->CCR |= I2C_CCR_FS;
    I2C1->CCR |= 30;
    I2C1->TRISE |= 51;
    I2C1->CR1 |= I2C_CR1_ACK;
    I2C1->CR1 |= I2C_CR1_PE;

}

我不完全理解问题出在哪里，以及为什么这种“数据模式”不起作用

4

1 回答 1

0

该显示器在 I2C 接口上有一个硬件错误（在错误的时间对 RD/WR 位进行采样，使其与 AT32UC3 等一些设备不兼容，而没有小型硬件 hack 和或 SW I2C 实现）但是使用 STM32 应该没问题。

SSD1306 LCD 的配置是关键，因为没有适当的初始化 LCD 不会显示任何内容。并且往往会卡在奇怪的状态（在错过配置或错误地发送 VRAM 数据之后）这个 LCD 往往会卡住，直到电源关闭/打开。因此，当您反复试验时，您需要始终关闭 LCD 电源，我敢打赌，即使您在一次试验中的代码正常，您也可能会因为 LCD 卡住而错过它。

还有许多 SSD1306 驱动程序使用页面 VRAM 访问，这似乎不适用于我测试过的任何 SSD1306（全部为 128x64）。我使用水平寻址模式来代替它。

这是我自己的用于 AT32UC3 芯片的 I2C LCD 的旧 C++ 驱动程序：

//------------------------------------------------------------------------------------------
//--- SSD1306 I2C OLED LCD driver ver 1.004 ------------------------------------------------
//------------------------------------------------------------------------------------------
#ifndef _LCD_SSD1306_I2C_h
#define _LCD_SSD1306_I2C_h
//------------------------------------------------------------------------------------------
#define SSD1306_SETCONTRAST 0x81
#define SSD1306_DISPLAYALLON_RESUME 0xA4
#define SSD1306_DISPLAYALLON 0xA5
#define SSD1306_NORMALDISPLAY 0xA6
#define SSD1306_INVERTDISPLAY 0xA7
#define SSD1306_DISPLAYOFF 0xAE
#define SSD1306_DISPLAYON 0xAF
#define SSD1306_SETDISPLAYOFFSET 0xD3
#define SSD1306_SETCOMPINS 0xDA
#define SSD1306_SETVCOMDETECT 0xDB
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
#define SSD1306_SETPRECHARGE 0xD9
#define SSD1306_SETMULTIPLEX 0xA8
#define SSD1306_SETLOWCOLUMN 0x00
#define SSD1306_SETHIGHCOLUMN 0x10
#define SSD1306_SETSTARTLINE 0x40
#define SSD1306_MEMORYMODE 0x20
#define SSD1306_COLUMNADDR 0x21
#define SSD1306_PAGEADDR   0x22
#define SSD1306_COMSCANINC 0xC0
#define SSD1306_COMSCANDEC 0xC8
#define SSD1306_SEGREMAP 0xA0
#define SSD1306_CHARGEPUMP 0x8D
#define SSD1306_SWITCHCAPVCC 0x2
// Scrolling #defines
#define SSD1306_ACTIVATE_SCROLL 0x2F
#define SSD1306_DEACTIVATE_SCROLL 0x2E
#define SSD1306_SET_VERTICAL_SCROLL_AREA 0xA3
#define SSD1306_RIGHT_HORIZONTAL_SCROLL 0x26
#define SSD1306_LEFT_HORIZONTAL_SCROLL 0x27
#define SSD1306_VERTICAL_AND_RIGHT_HORIZONTAL_SCROLL 0x29
#define SSD1306_VERTICAL_AND_LEFT_HORIZONTAL_SCROLL 0x2A
//------------------------------------------------------------------------------------------
//#define I2C_send(adr,buf,siz){} // this function is used to send packet to I2C
//------------------------------------------------------------------------------------------
#ifndef _brv8_tab
#define _brv8_tab
static const U8 brv8[256] =     // 8 bit bit reversal
    {
    0,128,64,192,32,160,96,224,16,144,80,208,48,176,112,240,8,136,72,200,40,168,104,232,24,152,
    88,216,56,184,120,248,4,132,68,196,36,164,100,228,20,148,84,212,52,180,116,244,12,140,76,204,
    44,172,108,236,28,156,92,220,60,188,124,252,2,130,66,194,34,162,98,226,18,146,82,210,50,178,
    114,242,10,138,74,202,42,170,106,234,26,154,90,218,58,186,122,250,6,134,70,198,38,166,102,230,
    22,150,86,214,54,182,118,246,14,142,78,206,46,174,110,238,30,158,94,222,62,190,126,254,1,129,
    65,193,33,161,97,225,17,145,81,209,49,177,113,241,9,137,73,201,41,169,105,233,25,153,89,217,57,
    185,121,249,5,133,69,197,37,165,101,229,21,149,85,213,53,181,117,245,13,141,77,205,45,173,109,
    237,29,157,93,221,61,189,125,253,3,131,67,195,35,163,99,227,19,147,83,211,51,179,115,243,11,139,
    75,203,43,171,107,235,27,155,91,219,59,187,123,251,7,135,71,199,39,167,103,231,23,151,87,215,55,
    183,119,247,15,143,79,207,47,175,111,239,31,159,95,223,63,191,127,255
    };
#endif
//------------------------------------------------------------------------------------------
class LCD_SSD1306_I2C
    {
public:
    int adr;                        // I2C adr
    int xs,ys,sz;               // resoluiton
    U8 _scr[((128*96)>>3)+1];   // screen buffer
    U8 *scr;
    U8 *pyx[96];                // scan lines

    void init(int _adr,int _xs,int _ys);                // initialize LCD: I2C_adr,xs,ys
    void command(U8 cmd);
    // rendering api
    void clrscr();                                  // clear screen buffer
    void rotate(int ang);                           // rotate 180 deg
    void rfsscr();                                  // copy actual screen buffer to LCD
    void pixel(int x, int y,bool col);              // set/res pixel
    void prnchr(int x,int y,char c);                // render char at x,y (y is rounded to multiple of 8)
    void prntxt(int x,int y,const char *txt);       // render text at x,y (y is rounded to multiple of 8)
    };
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::command(U8 cmd)
    {
    U8 buf[2]=
        {
        0x00,       // 0x40 data/command
        cmd,
        };
    I2C_send(adr,buf,2);
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::init(int _adr,int _xs,int _ys)
    {
    int y;
    adr=_adr;
    xs=_xs;
    ys=_ys;
    sz=xs*(ys>>3);
    const bool _external_Vcc=false;

    scr=_scr+1;                                         // skip first Byte (VRAM/command selection)
    for (y=0;y<ys;y++) pyx[y]=scr+((y>>3)*xs);          // scanlines for fast direct pixel access

    clrscr();
    // Init sequence
    U8 comPins = 0x02;
    U8 contrast = 0x8F;
         if((xs == 128) && (ys == 32)) { comPins = 0x02; contrast = 0x8F; }
    else if((xs == 128) && (ys == 64)) { comPins = 0x12; contrast = (_external_Vcc) ? 0x9F : 0xCF; }
    else if((xs ==  96) && (ys == 16)) { comPins = 0x02; contrast = (_external_Vcc) ? 0x10 : 0xAF; }
    else {} // Other screens

    static U8 init0[27]=
        {
        0x00,                                           // commands
        SSD1306_DISPLAYOFF,                             // 0xAE
        SSD1306_SETDISPLAYCLOCKDIV,0x80,                // 0xD5
        SSD1306_SETMULTIPLEX,ys-1,                      // 0xA8
        SSD1306_SETDISPLAYOFFSET,0x00,                  // 0xD3 no offset
        SSD1306_SETSTARTLINE | 0x0,                     // line 0
        SSD1306_CHARGEPUMP,(_external_Vcc)?0x10:0x14,   // 0x8D
        SSD1306_MEMORYMODE,0x00,                        // 0x20 horizontal (scanlines)
        SSD1306_SEGREMAP | 0x1,
        SSD1306_COMSCANDEC,
        SSD1306_SETCOMPINS,comPins,
        SSD1306_SETCONTRAST,contrast,
        SSD1306_SETPRECHARGE,(_external_Vcc)?0x22:0xF1, // 0xd9
        SSD1306_SETVCOMDETECT,0x40,                     // 0xDB
        SSD1306_DISPLAYALLON_RESUME,                    // 0xA4
        SSD1306_NORMALDISPLAY,                          // 0xA6
        SSD1306_DEACTIVATE_SCROLL,
        SSD1306_DISPLAYON,                              // Main screen turn on
        };
    I2C_send(adr,init0,sizeof(init0));
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::clrscr()
    {
    for (int a=0;a<sz;a++) scr[a]=0x00;
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::rotate(int ang)
    {
    U8 a0,a1;
    int x0,y0,x1,y1;
    if (ang==180)
     for (y0=0,y1=ys-8;y0<y1;y0+=8,y1-=8)
      for (x0=0,x1=xs-1;x0<xs;x0++,x1--)
          {
          a0=brv8[pyx[y0][x0]];
          a1=brv8[pyx[y1][x1]];
          pyx[y0][x0]=a1;
          pyx[y1][x1]=a0;
          }
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::rfsscr()
    {
    static const U8 init1[] =
        {
        0x00,                           // commands
        SSD1306_MEMORYMODE,0,           // horizontal addresing mode
        SSD1306_COLUMNADDR,0,xs-1,      // Column start/end address (0/127 reset)
        SSD1306_PAGEADDR,0,(ys>>3)-1,   // Page start/end address (0 reset)
        };
    I2C_send(adr,(U8*)init1,sizeof(init1));

    _scr[0]=0x40;                       // 0x40 VRAM
    // SW I2C can pass whole VRAM in single packet
//  I2C_send(adr,_scr,sz+1);

    // HW I2C must use packets up to 255 bytes so 128+1
    int i,n=128; U8 *p=_scr,a;
    for (i=0;i<sz;i+=n){ a=p[0]; p[0]=0x40; I2C_send(adr,p,n+1); p[0]=a; p+=n; }
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::pixel(int x, int y,bool col)
    {
    if ((x<0)||(x>=xs)||(y<0)||(y>=ys)) return;
    if (col) pyx[y][x] |= (1<<(y&7));
    else     pyx[y][x] &= (1<<(y&7));
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::prnchr(int x,int y,char c)
    {
    y&=0xFFFFFFF8;  // multiple of 8
    if ((y<0)||(y>ys-8)) return;
    int i,a;
    a=c; a<<=3;
    for (i=0;i<8;i++,x++,a++)
     if ((x>=0)&&(x<xs))
      pyx[y][x]=font[a];
    }
//------------------------------------------------------------------------------------------
void LCD_SSD1306_I2C::prntxt(int x,int y,const char *txt)
    {
    for (;*txt;txt++,x+=8) prnchr(x,y,*txt);
    }
//------------------------------------------------------------------------------------------
#undef I2C_send
//------------------------------------------------------------------------------------------
#endif
//------------------------------------------------------------------------------------------

所以要么只提取初始化数据包和帧发送，要么直接使用它，但在这种情况下，你需要I2C_send用你可以使用的任何东西来实现功能。

在这种情况下，您还需要我的字体：

static const U8 font[256<<3]=
    {
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7E,0x81,0x95,0xB1,0xB1,0x95,0x81,0x7E,0x7E,0xFF,0xEB,0xCF,0xCF,0xEB,0xFF,0x7E,0x0E,0x1F,0x3F,0x7E,0x3F,0x1F,0x0E,0x00,
    0x08,0x1C,0x3E,0x7F,0x3E,0x1C,0x08,0x00,0x18,0xBA,0xFF,0xFF,0xFF,0xBA,0x18,0x00,0x10,0xB8,0xFC,0xFF,0xFC,0xB8,0x10,0x00,0x00,0x00,0x18,0x3C,0x3C,0x18,0x00,0x00,
    0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0x00,0x3C,0x66,0x42,0x42,0x66,0x3C,0x00,0xFF,0xC3,0x99,0xBD,0xBD,0x99,0xC3,0xFF,0x70,0xF8,0x88,0x88,0xFD,0x7F,0x07,0x0F,
    0x00,0x4E,0x5F,0xF1,0xF1,0x5F,0x4E,0x00,0xC0,0xE0,0xFF,0x7F,0x05,0x05,0x07,0x07,0xC0,0xFF,0x7F,0x05,0x05,0x65,0x7F,0x3F,0x99,0x5A,0x3C,0xE7,0xE7,0x3C,0x5A,0x99,
    0x7F,0x3E,0x3E,0x1C,0x1C,0x08,0x08,0x00,0x08,0x08,0x1C,0x1C,0x3E,0x3E,0x7F,0x00,0x00,0x24,0x66,0xFF,0xFF,0x66,0x24,0x00,0x00,0x5F,0x5F,0x00,0x00,0x5F,0x5F,0x00,
    0x06,0x0F,0x09,0x7F,0x7F,0x01,0x7F,0x7F,0x40,0xDA,0xBF,0xA5,0xFD,0x59,0x03,0x02,0x00,0x70,0x70,0x70,0x70,0x70,0x70,0x00,0x80,0x94,0xB6,0xFF,0xFF,0xB6,0x94,0x80,
    0x00,0x04,0x06,0x7F,0x7F,0x06,0x04,0x00,0x00,0x10,0x30,0x7F,0x7F,0x30,0x10,0x00,0x08,0x08,0x08,0x2A,0x3E,0x1C,0x08,0x00,0x08,0x1C,0x3E,0x2A,0x08,0x08,0x08,0x00,
    0x3C,0x3C,0x20,0x20,0x20,0x20,0x20,0x00,0x08,0x1C,0x3E,0x08,0x08,0x3E,0x1C,0x08,0x30,0x38,0x3C,0x3E,0x3E,0x3C,0x38,0x30,0x06,0x0E,0x1E,0x3E,0x3E,0x1E,0x0E,0x06,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x5F,0x5F,0x06,0x00,0x00,0x00,0x00,0x07,0x07,0x00,0x07,0x07,0x00,0x00,0x14,0x7F,0x7F,0x14,0x7F,0x7F,0x14,0x00,
    0x24,0x2E,0x6B,0x6B,0x3A,0x12,0x00,0x00,0x46,0x66,0x30,0x18,0x0C,0x66,0x62,0x00,0x30,0x7A,0x4F,0x5D,0x37,0x7A,0x48,0x00,0x04,0x07,0x03,0x00,0x00,0x00,0x00,0x00,
    0x00,0x1C,0x3E,0x63,0x41,0x00,0x00,0x00,0x00,0x41,0x63,0x3E,0x1C,0x00,0x00,0x00,0x08,0x2A,0x3E,0x1C,0x1C,0x3E,0x2A,0x08,0x08,0x08,0x3E,0x3E,0x08,0x08,0x00,0x00,
    0x00,0x80,0xE0,0x60,0x00,0x00,0x00,0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00,0x00,0x00,0x00,0x60,0x60,0x00,0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x03,0x01,0x00,
    0x3E,0x7F,0x71,0x59,0x4D,0x7F,0x3E,0x00,0x40,0x42,0x7F,0x7F,0x40,0x40,0x00,0x00,0x62,0x73,0x59,0x49,0x6F,0x66,0x00,0x00,0x22,0x63,0x49,0x49,0x7F,0x36,0x00,0x00,
    0x18,0x1C,0x16,0x53,0x7F,0x7F,0x50,0x00,0x27,0x67,0x45,0x45,0x7D,0x39,0x00,0x00,0x3C,0x7E,0x4B,0x49,0x79,0x30,0x00,0x00,0x03,0x03,0x71,0x79,0x0F,0x07,0x00,0x00,
    0x36,0x7F,0x49,0x49,0x7F,0x36,0x00,0x00,0x06,0x4F,0x49,0x69,0x3F,0x1E,0x00,0x00,0x00,0x00,0x66,0x66,0x00,0x00,0x00,0x00,0x00,0x80,0xE6,0x66,0x00,0x00,0x00,0x00,
    0x08,0x1C,0x36,0x63,0x41,0x00,0x00,0x00,0x24,0x24,0x24,0x24,0x24,0x24,0x00,0x00,0x00,0x41,0x63,0x36,0x1C,0x08,0x00,0x00,0x02,0x03,0x51,0x59,0x0F,0x06,0x00,0x00,
    0x3E,0x7F,0x41,0x5D,0x5D,0x1F,0x1E,0x00,0x7C,0x7E,0x13,0x13,0x7E,0x7C,0x00,0x00,0x41,0x7F,0x7F,0x49,0x49,0x7F,0x36,0x00,0x1C,0x3E,0x63,0x41,0x41,0x63,0x22,0x00,
    0x41,0x7F,0x7F,0x41,0x63,0x3E,0x1C,0x00,0x41,0x7F,0x7F,0x49,0x5D,0x41,0x63,0x00,0x41,0x7F,0x7F,0x49,0x1D,0x01,0x03,0x00,0x1C,0x3E,0x63,0x41,0x51,0x73,0x72,0x00,
    0x7F,0x7F,0x08,0x08,0x7F,0x7F,0x00,0x00,0x00,0x41,0x7F,0x7F,0x41,0x00,0x00,0x00,0x30,0x70,0x40,0x41,0x7F,0x3F,0x01,0x00,0x41,0x7F,0x7F,0x08,0x1C,0x77,0x63,0x00,
    0x41,0x7F,0x7F,0x41,0x40,0x60,0x70,0x00,0x7F,0x7F,0x0E,0x1C,0x0E,0x7F,0x7F,0x00,0x7F,0x7F,0x06,0x0C,0x18,0x7F,0x7F,0x00,0x1C,0x3E,0x63,0x41,0x63,0x3E,0x1C,0x00,
    0x41,0x7F,0x7F,0x49,0x09,0x0F,0x06,0x00,0x1E,0x3F,0x21,0x71,0x7F,0x5E,0x00,0x00,0x41,0x7F,0x7F,0x09,0x19,0x7F,0x66,0x00,0x26,0x6F,0x4D,0x59,0x73,0x32,0x00,0x00,
    0x03,0x41,0x7F,0x7F,0x41,0x03,0x00,0x00,0x7F,0x7F,0x40,0x40,0x7F,0x7F,0x00,0x00,0x1F,0x3F,0x60,0x60,0x3F,0x1F,0x00,0x00,0x7F,0x7F,0x30,0x18,0x30,0x7F,0x7F,0x00,
    0x43,0x67,0x3C,0x18,0x3C,0x67,0x43,0x00,0x07,0x4F,0x78,0x78,0x4F,0x07,0x00,0x00,0x47,0x63,0x71,0x59,0x4D,0x67,0x73,0x00,0x00,0x7F,0x7F,0x41,0x41,0x00,0x00,0x00,
    0x01,0x03,0x06,0x0C,0x18,0x30,0x60,0x00,0x00,0x41,0x41,0x7F,0x7F,0x00,0x00,0x00,0x08,0x0C,0x06,0x03,0x06,0x0C,0x08,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
    0x00,0x00,0x03,0x07,0x04,0x00,0x00,0x00,0x20,0x74,0x54,0x54,0x3C,0x78,0x40,0x00,0x41,0x7F,0x3F,0x48,0x48,0x78,0x30,0x00,0x38,0x7C,0x44,0x44,0x6C,0x28,0x00,0x00,
    0x30,0x78,0x48,0x49,0x3F,0x7F,0x40,0x00,0x38,0x7C,0x54,0x54,0x5C,0x18,0x00,0x00,0x48,0x7E,0x7F,0x49,0x03,0x02,0x00,0x00,0x98,0xBC,0xA4,0xA4,0xF8,0x7C,0x04,0x00,
    0x41,0x7F,0x7F,0x08,0x04,0x7C,0x78,0x00,0x00,0x44,0x7D,0x7D,0x40,0x00,0x00,0x00,0x60,0xE0,0x80,0x80,0xFD,0x7D,0x00,0x00,0x41,0x7F,0x7F,0x10,0x38,0x6C,0x44,0x00,
    0x00,0x41,0x7F,0x7F,0x40,0x00,0x00,0x00,0x7C,0x7C,0x18,0x38,0x1C,0x7C,0x78,0x00,0x7C,0x7C,0x04,0x04,0x7C,0x78,0x00,0x00,0x38,0x7C,0x44,0x44,0x7C,0x38,0x00,0x00,
    0x84,0xFC,0xF8,0xA4,0x24,0x3C,0x18,0x00,0x18,0x3C,0x24,0xA4,0xF8,0xFC,0x84,0x00,0x44,0x7C,0x78,0x4C,0x04,0x1C,0x18,0x00,0x48,0x5C,0x54,0x54,0x74,0x24,0x00,0x00,
    0x00,0x04,0x3E,0x7F,0x44,0x24,0x00,0x00,0x3C,0x7C,0x40,0x40,0x3C,0x7C,0x40,0x00,0x1C,0x3C,0x60,0x60,0x3C,0x1C,0x00,0x00,0x3C,0x7C,0x70,0x38,0x70,0x7C,0x3C,0x00,
    0x44,0x6C,0x38,0x10,0x38,0x6C,0x44,0x00,0x9C,0xBC,0xA0,0xA0,0xFC,0x7C,0x00,0x00,0x4C,0x64,0x74,0x5C,0x4C,0x64,0x00,0x00,0x08,0x08,0x3E,0x77,0x41,0x41,0x00,0x00,
    0x00,0x00,0x00,0x77,0x77,0x00,0x00,0x00,0x41,0x41,0x77,0x3E,0x08,0x08,0x00,0x00,0x02,0x03,0x01,0x03,0x02,0x03,0x01,0x00,0x70,0x78,0x4C,0x46,0x4C,0x78,0x70,0x00,
    0x0E,0x9F,0x91,0xB1,0xFB,0x4A,0x00,0x00,0x3A,0x7A,0x40,0x40,0x7A,0x7A,0x40,0x00,0x38,0x7C,0x54,0x55,0x5D,0x19,0x00,0x00,0x02,0x23,0x75,0x55,0x55,0x7D,0x7B,0x42,
    0x21,0x75,0x54,0x54,0x7D,0x79,0x40,0x00,0x21,0x75,0x55,0x54,0x7C,0x78,0x40,0x00,0x20,0x74,0x57,0x57,0x7C,0x78,0x40,0x00,0x18,0x3C,0xA4,0xA4,0xE4,0x40,0x00,0x00,
    0x02,0x3B,0x7D,0x55,0x55,0x5D,0x1B,0x02,0x39,0x7D,0x54,0x54,0x5D,0x19,0x00,0x00,0x39,0x7D,0x55,0x54,0x5C,0x18,0x00,0x00,0x01,0x45,0x7C,0x7C,0x41,0x01,0x00,0x00,
    0x02,0x03,0x45,0x7D,0x7D,0x43,0x02,0x00,0x01,0x45,0x7D,0x7C,0x40,0x00,0x00,0x00,0x79,0x7D,0x16,0x12,0x16,0x7D,0x79,0x00,0x70,0x78,0x2B,0x2B,0x78,0x70,0x00,0x00,
    0x44,0x7C,0x7C,0x55,0x55,0x45,0x00,0x00,0x20,0x74,0x54,0x54,0x7C,0x7C,0x54,0x54,0x7C,0x7E,0x0B,0x09,0x7F,0x7F,0x49,0x00,0x32,0x7B,0x49,0x49,0x7B,0x32,0x00,0x00,
    0x32,0x7A,0x48,0x48,0x7A,0x32,0x00,0x00,0x32,0x7A,0x4A,0x48,0x78,0x30,0x00,0x00,0x3A,0x7B,0x41,0x41,0x7B,0x7A,0x40,0x00,0x3A,0x7A,0x42,0x40,0x78,0x78,0x40,0x00,
    0x9A,0xBA,0xA0,0xA0,0xFA,0x7A,0x00,0x00,0x01,0x19,0x3C,0x66,0x66,0x3C,0x19,0x01,0x3D,0x7D,0x40,0x40,0x7D,0x3D,0x00,0x00,0x18,0x3C,0x24,0xE7,0xE7,0x24,0x24,0x00,
    0x68,0x7E,0x7F,0x49,0x43,0x66,0x20,0x00,0x2B,0x2F,0xFC,0xFC,0x2F,0x2B,0x00,0x00,0xFF,0xFF,0x09,0x09,0x2F,0xF6,0xF8,0xA0,0x40,0xC0,0x88,0xFE,0x7F,0x09,0x03,0x02,
    0x20,0x74,0x54,0x55,0x7D,0x79,0x40,0x00,0x00,0x44,0x7D,0x7D,0x41,0x00,0x00,0x00,0x30,0x78,0x48,0x4A,0x7A,0x32,0x00,0x00,0x38,0x78,0x40,0x42,0x7A,0x7A,0x40,0x00,
    0x7A,0x7A,0x0A,0x0A,0x7A,0x70,0x00,0x00,0x7D,0x7D,0x19,0x31,0x7D,0x7D,0x00,0x00,0x00,0x26,0x2F,0x29,0x2F,0x2F,0x28,0x00,0x00,0x26,0x2F,0x29,0x2F,0x26,0x00,0x00,
    0x30,0x78,0x4D,0x45,0x60,0x20,0x00,0x00,0x38,0x38,0x08,0x08,0x08,0x08,0x00,0x00,0x08,0x08,0x08,0x08,0x38,0x38,0x00,0x00,0x4F,0x6F,0x30,0x18,0xCC,0xEE,0xBB,0x91,
    0x4F,0x6F,0x30,0x18,0x6C,0x76,0xFB,0xF9,0x00,0x00,0x00,0x7B,0x7B,0x00,0x00,0x00,0x08,0x1C,0x36,0x22,0x08,0x1C,0x36,0x22,0x22,0x36,0x1C,0x08,0x22,0x36,0x1C,0x08,
    0xAA,0x00,0x55,0x00,0xAA,0x00,0x55,0x00,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xDD,0xFF,0xAA,0x77,0xDD,0xAA,0xFF,0x77,0x00,0x00,0x00,0xFF,0xFF,0x00,0x00,0x00,
    0x10,0x10,0x10,0xFF,0xFF,0x00,0x00,0x00,0x14,0x14,0x14,0xFF,0xFF,0x00,0x00,0x00,0x10,0x10,0xFF,0xFF,0x00,0xFF,0xFF,0x00,0x10,0x10,0xF0,0xF0,0x10,0xF0,0xF0,0x00,
    0x14,0x14,0x14,0xFC,0xFC,0x00,0x00,0x00,0x14,0x14,0xF7,0xF7,0x00,0xFF,0xFF,0x00,0x00,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x00,0x14,0x14,0xF4,0xF4,0x04,0xFC,0xFC,0x00,
    0x14,0x14,0x17,0x17,0x10,0x1F,0x1F,0x00,0x10,0x10,0x1F,0x1F,0x10,0x1F,0x1F,0x00,0x14,0x14,0x14,0x1F,0x1F,0x00,0x00,0x00,0x10,0x10,0x10,0xF0,0xF0,0x00,0x00,0x00,
    0x00,0x00,0x00,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x10,0x1F,0x1F,0x10,0x10,0x10,0x10,0x10,0x10,0xF0,0xF0,0x10,0x10,0x10,0x00,0x00,0x00,0xFF,0xFF,0x10,0x10,0x10,
    0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0xFF,0xFF,0x10,0x10,0x10,0x00,0x00,0x00,0xFF,0xFF,0x14,0x14,0x14,0x00,0x00,0xFF,0xFF,0x00,0xFF,0xFF,0x10,
    0x00,0x00,0x1F,0x1F,0x10,0x17,0x17,0x14,0x00,0x00,0xFC,0xFC,0x04,0xF4,0xF4,0x14,0x14,0x14,0x17,0x17,0x10,0x17,0x17,0x14,0x14,0x14,0xF4,0xF4,0x04,0xF4,0xF4,0x14,
    0x00,0x00,0xFF,0xFF,0x00,0xF7,0xF7,0x14,0x14,0x14,0x14,0x14,0x14,0x14,0x14,0x14,0x14,0x14,0xF7,0xF7,0x00,0xF7,0xF7,0x14,0x14,0x14,0x14,0x17,0x17,0x14,0x14,0x14,
    0x10,0x10,0x1F,0x1F,0x10,0x1F,0x1F,0x10,0x14,0x14,0x14,0xF4,0xF4,0x14,0x14,0x14,0x10,0x10,0xF0,0xF0,0x10,0xF0,0xF0,0x10,0x00,0x00,0x1F,0x1F,0x10,0x1F,0x1F,0x10,
    0x00,0x00,0x00,0x1F,0x1F,0x14,0x14,0x14,0x00,0x00,0x00,0xFC,0xFC,0x14,0x14,0x14,0x00,0x00,0xF0,0xF0,0x10,0xF0,0xF0,0x10,0x10,0x10,0xFF,0xFF,0x10,0xFF,0xFF,0x10,
    0x14,0x14,0x14,0xFF,0xFF,0x14,0x14,0x14,0x10,0x10,0x10,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x10,0x10,0x10,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
    0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,
    0x38,0x7C,0x44,0x6C,0x38,0x6C,0x44,0x00,0xFC,0xFE,0x2A,0x2A,0x3E,0x14,0x00,0x00,0x7E,0x7E,0x02,0x02,0x06,0x06,0x00,0x00,0x02,0x7E,0x7E,0x02,0x7E,0x7E,0x02,0x00,
    0x63,0x77,0x5D,0x49,0x63,0x63,0x00,0x00,0x38,0x7C,0x44,0x7C,0x3C,0x04,0x04,0x00,0x80,0xFE,0x7E,0x20,0x20,0x3E,0x1E,0x00,0x04,0x06,0x02,0x7E,0x7C,0x06,0x02,0x00,
    0x99,0xBD,0xE7,0xE7,0xBD,0x99,0x00,0x00,0x1C,0x3E,0x6B,0x49,0x6B,0x3E,0x1C,0x00,0x4C,0x7E,0x73,0x01,0x73,0x7E,0x4C,0x00,0x30,0x78,0x4A,0x4F,0x7D,0x39,0x00,0x00,
    0x18,0x3C,0x24,0x3C,0x3C,0x24,0x3C,0x18,0x98,0xFC,0x64,0x3C,0x3E,0x27,0x3D,0x18,0x1C,0x3E,0x6B,0x49,0x49,0x00,0x00,0x00,0x7E,0x7F,0x01,0x01,0x7F,0x7E,0x00,0x00,
    0x2A,0x2A,0x2A,0x2A,0x2A,0x2A,0x00,0x00,0x44,0x44,0x5F,0x5F,0x44,0x44,0x00,0x00,0x40,0x51,0x5B,0x4E,0x44,0x40,0x00,0x00,0x40,0x44,0x4E,0x5B,0x51,0x40,0x00,0x00,
    0x00,0x00,0x00,0xFE,0xFF,0x01,0x07,0x06,0x60,0xE0,0x80,0xFF,0x7F,0x00,0x00,0x00,0x08,0x08,0x6B,0x6B,0x08,0x08,0x00,0x00,0x24,0x36,0x12,0x36,0x24,0x36,0x12,0x00,
    0x00,0x06,0x0F,0x09,0x0F,0x06,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x10,0x00,0x00,0x00,0x10,0x30,0x70,0xC0,0xFF,0xFF,0x01,0x01,
    0x00,0x1F,0x1F,0x01,0x1F,0x1E,0x00,0x00,0x00,0x19,0x1D,0x17,0x12,0x00,0x00,0x00,0x00,0x00,0x3C,0x3C,0x3C,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    };

用法是这样的：

#include "font_8x8.h"
#include "LCD_SSD1306_I2C.h"
LCD_SSD1306_I2C lcd;

// init
for (int adr=1;adr<128;adr++) // find I2C device
 if (I2C_probe(adr))
    {
    lcd.init(adr,128,64); // LCD address and resolution
    break;
    }

// render
lcd.clrscr();
lcd.prntxt(0,0,"test LCD");
lcd.pixel(10,10,true);
lcd.rfsscr();

只换I2C_？？？用你所拥有的东西。

仔细查看您所做的工作init和功能和对照参考，并修复/测试直到它工作......rfsscr

不要忘记在任何测试之前关闭/打开电源！

[edit1] 我重写了我的旧驱动程序

所以这里是较新版本的驱动程序，其中一些错误被整理出来，并增加了渲染功能，如图案线、填充多边形......

于 2021-02-24T07:21:56.357 回答