我正在检查我的 NVS 存储容量。这是我做分区时的输出。
toolchain path: /home/dhananjay/esp/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc
Toolchain version: crosstool-ng-1.22.0-80-g6c4433a
编译器版本：5.2.0
Python requirements from /home/dhananjay/esp/esp-idf/requirements.txt都满意。生成的分区表二进制文件。内容：
# Espressif ESP32 Partition Table
# Name, Type, SubType, Offset, Size, Flags
nvs,data,nvs,0x9000,16K,
otadata,data,ota,0xd000,8K,
phy_init,data,phy,0xf000,4K,
factory,app,factory,0x10000,1M,
ota_0,app,ota_0,0x110000,1M,
ota_1,app,ota_1,0x210000,1M,
*******************************************************************************
Partition flashing command:
python /home/dhananjay/esp/esp-idf/components/esptool_py/esptool/esptool.py --chip esp32 --port /dev/ttyUSB1 --baud 115200 --before default_reset --after hard_reset write_flash 0x8000 /home/dhananjay/esp/Homebridge/build/partitions_two_ota.bin
dhananjay
这表明我可以使用 16k 的 nvs 存储，但是当我通过命名空间“storage”和键“a”-“p”写入 nvs 时，每个键包含 1022 字节的数据。我得到这个输出。
Done
String written successfully
Namespace a Completed
Done
String written successfully
Namespace b Completed
Done
String written successfully
Namespace c Completed
Done
String written successfully
Namespace d Completed
Done
String written successfully
Namespace e Completed
Done
String written successfully
Namespace f Completed
Done
String written successfully
Namespace g Completed
Done
String written successfully
Namespace h Completed
Done
String written successfully
Namespace i Completed
Done
Not enough Storage space
Wrongfull termination in Writing String
我只能存储 10220 Kb 的数据，请帮忙。