0

这是来自https://forum.43oh.com/topic/9450-tiny-msp430-preemptive-multitasking-system/的 @tonyp12 的 MSP430G2553 Launchpad 的小型抢占式调度算法

尽管我知道内容切换的概念，但这个程序让我有点困惑。有人可以在下面的片段中具体解释他在做什么吗？

int* multistack = (int*) __get_SP_register();
  int i=0; while(i<tasks-1){
    int j = stacksize[i]; if (!j) j = 24;
    multistack -= j;  
    *(multistack) = (int) taskpnt[++i];         // prefill in PC 
    *(multistack-1) = GIE;                      // prefill in SR
    taskstackpnt[i] = (int) multistack-26;      // needs 12 dummy push words
  }

和

#pragma vector = WDT_VECTOR 
__raw __interrupt void taskswitcher(void)
{
  asm ("push R15\n push R14\n push R13\n push R12\n"
       "push R11\n push R10\n push R9\n push R8\n"
       "push R7\n push R6\n push R5\n push R4");

  taskstackpnt[taskrun] = __get_SP_register();
  if (++taskrun == tasks) taskrun = 0;
  __set_SP_register(taskstackpnt[taskrun]);
  
  asm ("pop R4\n pop R5\n pop R6\n pop R7\n"
       "pop R8\n pop R9\n pop R10\n pop R11\n"
       "pop R12\n pop R13\n pop R14\n pop R15");
}

谢谢。这是完整的代码：

#include "msp430.h"
#include "common.h"

//=========================(C) Tony Philipsson 2016 =======================
funcpnt const taskpnt[]={ task1, task2, task3,  // <- PUT YOUR TASKS HERE
}; 
const int stacksize[tasks] = {28};              // a blank value defaults to 24 stack words
//=========================================================================
int taskstackpnt[tasks];
unsigned int taskdelay[tasks];
char taskrun;

int main( void )
{
  WDTCTL = WDTPW + WDTHOLD;                     // Stop watchdog timer 
  if (CALBC1_8MHZ != 0xff){               // erased by mistake?
    BCSCTL1 = CALBC1_8MHZ;                   // Set DCO to factory calibrate 1MHz  
    DCOCTL = CALDCO_8MHZ;
  } 
  int* multistack = (int*) __get_SP_register();
  int i=0; while(i<tasks-1){
    int j = stacksize[i]; if (!j) j = 24;
    multistack -= j;  
    *(multistack) = (int) taskpnt[++i];         // prefill in PC 
    *(multistack-1) = GIE;                      // prefill in SR
    taskstackpnt[i] = (int) multistack-26;      // needs 12 dummy push words
  }
  WDTCTL = WDTPW+WDTTMSEL+WDTCNTCL;             // 4ms interval at 8MHz smclk
  IE1 |= WDTIE;
  __bis_SR_register(GIE);
  asm ("br &taskpnt");                          // indirect jmp to first task
}

//============= TASK SWITCHER ISR =============
#pragma vector = WDT_VECTOR 
__raw __interrupt void taskswitcher(void)
{
  asm ("push R15\n push R14\n push R13\n push R12\n"
       "push R11\n push R10\n push R9\n push R8\n"
       "push R7\n push R6\n push R5\n push R4");

  taskstackpnt[taskrun] = __get_SP_register();
  if (++taskrun == tasks) taskrun = 0;
  __set_SP_register(taskstackpnt[taskrun]);

  asm ("pop R4\n pop R5\n pop R6\n pop R7\n"
       "pop R8\n pop R9\n pop R10\n pop R11\n"
       "pop R12\n pop R13\n pop R14\n pop R15");
} 
#include "msp430.h"
#include "common.h"

__task void task1(void){
  P1DIR |= BIT0;
  while(1){
    __delay_cycles(800000);
    P1OUT |= BIT0;
    __delay_cycles(800000);
    P1OUT &=~BIT0;        
  }
}
#include "msp430.h"
#include "common.h"

__task void task2(void){
  P1DIR |= BIT6;
  while(1){
    __delay_cycles(1200000);
    P1OUT |= BIT6;
    __delay_cycles(1200000);
    P1OUT &=~BIT6;        
  }
}
#include "msp430.h"
#include "common.h"
unsigned int fibo(int);

__task void task3(void){
  int temp = 0;
  while(1){
    fibo(++temp);
  }
}
unsigned int fibo(int n){
  if (n < 2)
    return n;
  else
    return (fibo(n-1) + fibo(n-2));
}
#ifndef COMMON_H_
#define COMMON_H_
#define  tasks (sizeof(taskpnt)/2)
__task void task1(void);
__task void task2(void);
__task void task3(void);
typedef __task void (*funcpnt)(void);
#endif
4

1 回答 1

1

第一个代码片段为各种任务初始化所有堆栈。

首先将PC保存为任务函数的地址（第一条指令）：

*(multistack) = (int) taskpnt[++i];

然后它保存启用 GIE 的状态寄存器（需要正确的任务切换功能）：

*(multistack-1) = GIE;

这两个将在调度程序中断结束时由 reti 自动恢复。

还保存了任务的新堆栈指针（包括保存注册表的空间）：

taskstackpnt[i] = (int) multistack-26;

第二个片段是调度程序中断本身。

PC和SR在中断调用时由硬件自动保存。在中断代码中，注册表被保存为当前任务：

asm ("push R15\n push R14\n push R13\n push R12\n"
   "push R11\n push R10\n push R9\n push R8\n"
   "push R7\n push R6\n push R5\n push R4");

然后软件保存当前任务的堆栈指针：

taskstackpnt[taskrun] = __get_SP_register();

并获取下一个任务堆栈指针索引：

if (++taskrun == tasks) taskrun = 0;

然后恢复新的任务堆栈指针：

__set_SP_register(taskstackpnt[taskrun]);

并弹出保存在堆栈中的注册表：

 asm ("pop R4\n pop R5\n pop R6\n pop R7\n"
   "pop R8\n pop R9\n pop R10\n pop R11\n"
   "pop R12\n pop R13\n pop R14\n pop R15");

新任务的 PC 和 SR 由中断的 reti 恢复。

新任务已准备就绪！

于 2019-02-21T10:43:08.460 回答