这是我第一次使用 rtl,所以我遇到了一些可能很简单的问题,但我无法找到任何解释为什么会发生这种情况以及如何解决它的东西。目前,当我从我的 vhdl 代码创建一个 rtl 时,输出未显示为连接到设计的其余部分。下图显示了输出,而不是设计的其余部分,因为它非常大。
我的代码中相关的部分如下所示:
`library IEEE;
use IEEE.std_logic_1164.all;
use ieee.std_logic_unsigned.all;
use ieee.std_logic_arith.all;
use ieee.numeric_std.all;
entity FIFOClockOut is
port (
--Inputs
dataIn : IN std_logic_vector(7 downto 0); -- data input
clk : IN std_logic; -- clock input
EnableWr : IN std_logic; -- a value is being transmitted to the FIFO
clearMem : IN std_logic; -- clears the memory of the FIFO
resetOut : IN std_logic; -- resets the FIFO output counter
resetFull : IN std_logic; -- resets the the FIFO completely
--Outputs
MemNear : INOUT std_logic; -- the memory is almost out
FullMem : OUT std_logic; -- the memory is full in the FIFO
dataOut : OUT std_logic_vector(7 downto 0); -- data output
sel : INOUT std_logic_vector(2 downto 0); -- select output for mux
FinishedOut : OUT std_logic; -- the FIFO has finished sending out the data
clkOut : INOUT std_logic := '0' -- the clock that the output data is using
);
end FIFOClockOut;
architecture architecture_FIFOClockOut of FIFOClockOut is
-- signal, component etc. declarations
type ram_t is array (0 to 4095) of std_logic_vector(7 downto 0); -- The memory for the FIFO
signal ram: ram_t;
signal counterIn : integer; -- counter for input
signal counterOut : integer; -- counter for output
signal counterClock : std_logic_vector(2 downto 0); -- counter for clock
signal FullMemBuff : std_logic;
signal FinishedOutBuff: std_logic;
begin
process(clk)
begin
--there is some more code here which does not use dataOut
if (clk='1') then
if (FullMemBuff = '0') then
if (EnableWr = '1') then
ram(counterIn)<= dataIn;
counterIn <= counterIn + 1;
end if;
end if;
if(clkOut ='1') then
if (FinishedOutBuff = '0') then
counterClock <= counterClock + "1";
sel <= sel+"1";
end if;
if (counterClock = "111") then
if (FinishedOutBuff = '0') then
dataOut <= ram(counterOut);
counterOut <= counterOut+1;
if (counterIn <= (counterOut)) then
FinishedOutBuff <= '1';
sel<= "111";
dataOut <= "00000000";
end if;
else
dataOut <= "00000000";
sel <= "111";
end if;
end if;
end if;
end if;
end process;
end architecture_FIFOClockOut;
感谢您的帮助。我正在使用 Libero Polar Fire 对 vhdl 进行编码并创建 rtl。我已经模拟了代码,它按预期工作并提供了正确的输出。如果有不清楚的地方或想要更多代码,请提出问题。