37

我正在构建一个应用程序，该应用程序需要在发送电子邮件时以动态/编程方式了解并使用不同的 SMTP 设置。

我习惯于使用 system.net/mailSettings 方法，但据我了解，它一次只允许一个 SMTP 连接定义，由 SmtpClient() 使用。

但是，我需要更多类似 connectionStrings 的方法，我可以在其中根据键/名称提取一组设置。

有什么建议吗？我愿意跳过传统的 SmtpClient/mailSettings 方法，我认为必须...

4

8 回答 8

67

根据环境，我需要在 web.config 中有不同的 smtp 配置：开发、登台和生产。

这是我最终使用的：

在 web.config 中：

<configuration>
  <configSections>
    <sectionGroup name="mailSettings">
      <section name="smtp_1" type="System.Net.Configuration.SmtpSection"/>
      <section name="smtp_2" type="System.Net.Configuration.SmtpSection"/>
      <section name="smtp_3" type="System.Net.Configuration.SmtpSection"/>
    </sectionGroup>
  </configSections>
  <mailSettings>
    <smtp_1 deliveryMethod="Network" from="mail1@temp.uri">
      <network host="..." defaultCredentials="false"/>
    </smtp_1>
    <smtp_2 deliveryMethod="Network" from="mail2@temp.uri">
      <network host="1..." defaultCredentials="false"/>
    </smtp_2>
    <smtp_3 deliveryMethod="Network" from="mail3@temp.uri">
      <network host="..." defaultCredentials="false"/>
    </smtp_3>
  </mailSettings>
</configuration>

然后在代码中：

return (SmtpSection)ConfigurationManager.GetSection("mailSettings/smtp_1");
return (SmtpSection)ConfigurationManager.GetSection("mailSettings/smtp_2");
return (SmtpSection)ConfigurationManager.GetSection("mailSettings/smtp_3");
于 2011-01-07T10:32:38.827 回答
26 
SmtpSection smtpSection =  (SmtpSection)ConfigurationManager.GetSection("mailSettings/smtp_1");

SmtpClient smtpClient = new SmtpClient(smtpSection.Network.Host, smtpSection.Network.Port);
smtpClient.Credentials = new NetworkCredential(smtpSection.Network.UserName, smtpSection.Network.Password);
于 2013-08-21T21:50:50.377 回答
15

这就是我使用它的方式，它对我来说很好用（设置类似于 Mikko 的答案）：

  1. 首先设置配置部分：

    <configuration>
  <configSections>
    <sectionGroup name="mailSettings">
      <section name="default" type="System.Net.Configuration.SmtpSection" />
      <section name="mailings" type="System.Net.Configuration.SmtpSection" />
      <section name="partners" type="System.Net.Configuration.SmtpSection" />
    </sectionGroup>
  </configSections>
<mailSettings>
  <default deliveryMethod="Network">
    <network host="smtp1.test.org" port="587" enableSsl="true"
           userName="test" password="test"/>
  </default>
  <mailings deliveryMethod="Network">
    <network host="smtp2.test.org" port="587" enableSsl="true"
           userName="test" password="test"/>
  </mailings>
<partners deliveryMethod="Network">
  <network host="smtp3.test.org" port="587" enableSsl="true"
           userName="test" password="test"/>
</partners>

  2. 那么最好创建某种包装器。请注意，下面的大部分代码取自 SmtpClient here的 .NET 源代码

    public class CustomSmtpClient
{
    private readonly SmtpClient _smtpClient;

    public CustomSmtpClient(string sectionName = "default")
    {
        SmtpSection section = (SmtpSection)ConfigurationManager.GetSection("mailSettings/" + sectionName);

        _smtpClient = new SmtpClient();

        if (section != null)
        {
            if (section.Network != null)
            {
                _smtpClient.Host = section.Network.Host;
                _smtpClient.Port = section.Network.Port;
                _smtpClient.UseDefaultCredentials = section.Network.DefaultCredentials;

                _smtpClient.Credentials = new NetworkCredential(section.Network.UserName, section.Network.Password, section.Network.ClientDomain);
                _smtpClient.EnableSsl = section.Network.EnableSsl;

                if (section.Network.TargetName != null)
                    _smtpClient.TargetName = section.Network.TargetName;
            }

            _smtpClient.DeliveryMethod = section.DeliveryMethod;
            if (section.SpecifiedPickupDirectory != null && section.SpecifiedPickupDirectory.PickupDirectoryLocation != null)
                _smtpClient.PickupDirectoryLocation = section.SpecifiedPickupDirectory.PickupDirectoryLocation;
        }
    }

    public void Send(MailMessage message)
    {
        _smtpClient.Send(message);
    }

    }

  3. 然后只需发送电子邮件：

    new CustomSmtpClient("mailings").Send(new MailMessage())

于 2014-11-17T10:07:30.567 回答
3

这可能对某人有帮助，也可能对某人没有帮助，但如果你在这里寻找多个 smtp 配置的 Mandrill 设置，我最终创建了一个继承自 SmtpClient 类的类，下面这个人的代码非常好： https ://github.com /iurisilvio/mandrill-smtp.NET

    /// <summary>
/// Overrides the default SMTP Client class to go ahead and default the host and port to Mandrills goodies.
/// </summary>
public class MandrillSmtpClient : SmtpClient
{

    public MandrillSmtpClient( string smtpUsername, string apiKey, string host = "smtp.mandrillapp.com", int port = 587 )
        : base( host, port )
    {

        this.Credentials = new NetworkCredential( smtpUsername, apiKey );

        this.EnableSsl = true;
    }
}

这是一个如何调用它的示例：

        [Test]
    public void SendMandrillTaggedEmail()
    {

        string SMTPUsername = _config( "MandrillSMTP_Username" );
        string APIKey = _config( "MandrillSMTP_Password" );

        using( var client = new MandrillSmtpClient( SMTPUsername, APIKey ) ) {

            MandrillMailMessage message = new MandrillMailMessage() 
            { 
                From = new MailAddress( _config( "FromEMail" ) ) 
            };

            string to = _config( "ValidToEmail" );

            message.To.Add( to );

            message.MandrillHeader.PreserveRecipients = false;

            message.MandrillHeader.Tracks.Add( ETrack.opens );
            message.MandrillHeader.Tracks.Add( ETrack.clicks_all );

            message.MandrillHeader.Tags.Add( "NewsLetterSignup" );
            message.MandrillHeader.Tags.Add( "InTrial" );
            message.MandrillHeader.Tags.Add( "FreeContest" );


            message.Subject = "Test message 3";

            message.Body = "love, love, love";

            client.Send( message );
        }
    }
于 2012-12-21T21:07:50.673 回答
2

准备好发送邮件时，只需传递相关详细信息，并将所有这些设置存储在 web.config 的应用程序设置中。

例如，在 web.config 中创建不同的 AppSettings（如“EmailUsername1”等），您将可以完全分别调用它们，如下所示：

        System.Net.Mail.MailMessage mail = null;
        System.Net.Mail.SmtpClient smtp = null;

        mail = new System.Net.Mail.MailMessage();

        //set the addresses
        mail.From = new System.Net.Mail.MailAddress(System.Configuration.ConfigurationManager.AppSettings["Email1"]);
        mail.To.Add("someone@example.com");

        mail.Subject = "The secret to the universe";
        mail.Body = "42";

        //send the message
        smtp = new System.Net.Mail.SmtpClient(System.Configuration.ConfigurationManager.AppSettings["YourSMTPServer"]);

        //to authenticate, set the username and password properites on the SmtpClient
        smtp.Credentials = new System.Net.NetworkCredential(System.Configuration.ConfigurationManager.AppSettings["EmailUsername1"], System.Configuration.ConfigurationManager.AppSettings["EmailPassword1"]);
        smtp.UseDefaultCredentials = false;
        smtp.Port = System.Configuration.ConfigurationManager.AppSettings["EmailSMTPPort"];
        smtp.EnableSsl = false;

        smtp.Send(mail);
于 2010-12-06T04:06:45.223 回答
1

我有同样的需求，标记的答案对我有用。

我在

网络配置：

      <configSections>
        <sectionGroup name="mailSettings2">
          <section name="noreply" type="System.Net.Configuration.SmtpSection"/>
        </sectionGroup>
        <section name="othersection" type="SomeType" />
      </configSections>

      <mailSettings2>
        <noreply deliveryMethod="Network" from="noreply@host.com"> // noreply, in my case - use your mail in the condition bellow
          <network enableSsl="false" password="<YourPass>" host="<YourHost>" port="25" userName="<YourUser>" defaultCredentials="false" />
        </noreply>
      </mailSettings2>
      ... </configSections>

然后，我有一个发送邮件的线程：

一些页面.cs

private bool SendMail(String From, String To, String Subject, String Html)
    {
        try
        {
            System.Net.Mail.SmtpClient SMTPSender = null;

            if (From.Split('@')[0] == "noreply")
            {
                System.Net.Configuration.SmtpSection smtpSection = (SmtpSection)ConfigurationManager.GetSection("mailSettings2/noreply");
                SMTPSender = new System.Net.Mail.SmtpClient(smtpSection.Network.Host, smtpSection.Network.Port);
                SMTPSender.Credentials = new System.Net.NetworkCredential(smtpSection.Network.UserName, smtpSection.Network.Password);
                System.Net.Mail.MailMessage Message = new System.Net.Mail.MailMessage();
                Message.From = new System.Net.Mail.MailAddress(From);

                Message.To.Add(To);
                Message.Subject = Subject;
                Message.Bcc.Add(Recipient);
                Message.IsBodyHtml = true;
                Message.Body = Html;
                Message.BodyEncoding = Encoding.GetEncoding("ISO-8859-1");
                Message.SubjectEncoding = Encoding.GetEncoding("ISO-8859-1");
                SMTPSender.Send(Message);

            }
            else
            {
                SMTPSender = new System.Net.Mail.SmtpClient();
                System.Net.Mail.MailMessage Message = new System.Net.Mail.MailMessage();
                Message.From = new System.Net.Mail.MailAddress(From);

                SMTPSender.EnableSsl = SMTPSender.Port == <Port1> || SMTPSender.Port == <Port2>;

                Message.To.Add(To);
                Message.Subject = Subject;
                Message.Bcc.Add(Recipient);
                Message.IsBodyHtml = true;
                Message.Body = Html;
                Message.BodyEncoding = Encoding.GetEncoding("ISO-8859-1");
                Message.SubjectEncoding = Encoding.GetEncoding("ISO-8859-1");
                SMTPSender.Send(Message);
            }
        }
        catch (Exception Ex)
        {
            Logger.Error(Ex.Message, Ex.GetBaseException());
            return false;
        }
        return true;
    }

谢谢你=)

于 2014-01-08T16:37:08.720 回答
0

我最终构建了自己的自定义配置加载器，该加载器在 EmailService 类中使用。配置数据可以像连接字符串一样存储在 web.config 中，并通过名称动态拉取。

于 2010-12-23T02:50:25.883 回答
-1

您似乎可以使用不同的 SMTP 字符串进行初始化。

SmtpClient 客户端 = 新 SmtpClient(server);

http://msdn.microsoft.com/en-us/library/k0y6s613.aspx

我希望这就是你要找的。

于 2010-12-06T03:56:25.363 回答