我有一个为使用 d 触发器和多路复用器制成的移位器编写的 vhdl 代码，它运行并检查语法是否成功。但是，现在我正在测试平台上工作，我遇到了一些错误。
VHDL代码是：
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
ENTITY MUX41 IS
PORT (i3, i2, i1, i0 : IN BIT;
s: IN BIT_VECTOR(1 DOWNTO 0);
o: OUT BIT);
END MUX41;
ARCHITECTURE arch_mux41 OF MUX41 IS
BEGIN
PROCESS(i3, i2, i1, i0, s)
BEGIN
CASE s IS
WHEN "00" => o <= i0;
WHEN "01" => o <= i1;
WHEN "10" => o <= i2;
WHEN "11" => o <= i3;
WHEN OTHERS => NULL;
END CASE;
END PROCESS;
END arch_mux41;
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
ENTITY DFF IS
PORT(d, clk : IN BIT;
q, qb : OUT BIT);
END DFF;
ARCHITECTURE arch_dff OF DFF IS
BEGIN
PROCESS(clk)
VARIABLE q_temp : BIT;
BEGIN
IF(clk'EVENT AND clk='1')THEN
q_temp := d;
END IF;
q <= q_temp;
qb <= NOT q_temp;
END PROCESS;
END arch_dff;
LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
ENTITY UShift IS
PORT(clk, il, ir : IN BIT;
s: IN BIT_VECTOR(1 DOWNTO 0);
i : IN BIT_VECTOR(3 DOWNTO 0);
q : OUT BIT_VECTOR(3 DOWNTO 0));
END UShift;
ARCHITECTURE struct OF UShift IS
COMPONENT MUX41
PORT (i3, i2, i1, i0 : IN BIT;
s: IN BIT_VECTOR(1 DOWNTO 0);
o: OUT BIT);
END COMPONENT;
COMPONENT DFF
PORT(d, clk : IN BIT;
q, qb : OUT BIT);
END COMPONENT;
FOR U1, U2, U3, U4: MUX41 USE ENTITY WORK.MUX41(arch_mux41);
FOR U5, U6, U7, U8: DFF USE ENTITY WORK.DFF(arch_dff);
SIGNAL o: BIT_VECTOR(3 DOWNTO 0);
SIGNAL qb: BIT_VECTOR(3 DOWNTO 0);
SIGNAL qt:BIT_VECTOR(3 DOWNTO 0);
BEGIN
U1:MUX41 PORT MAP(il,qt(2), i(3), qt(3), s, o(3));
U2:MUX41 PORT MAP(qt(3), qt(1), i(2), qt(2), s, o(2));
U3:MUX41 PORT MAP(qt(2), qt(0), i(1), qt(1), s, o(1));
U4:MUX41 PORT MAP(qt(1), ir, i(0), qt(0), s, o(0));
U5:DFF PORT MAP(o(3), clk, qt(3), qb(3));
U6:DFF PORT MAP(o(2), clk, qt(2), qb(2));
U7:DFF PORT MAP(o(1), clk, qt(1), qb(1));
U8:DFF PORT MAP(o(0), clk, qt(0), qb(0));
q <= qt;
END struct;
出现的错误消息仅在检查测试台中的语法时出现。他们声明实体与“clk”、“il”、“ir”、“i”、“s”和“q”的组件端口不匹配。有人对我可能有什么问题有任何想法吗？我已经在网上阅读了一些针对类似问题的建议，但没有一个实际应用于此特定代码。
测试台是：
LIBRARY ieee;
USE IEEE.STD_LOGIC_1164.ALL;
USE ieee.numeric_std.ALL;
ENTITY UShift_test IS
END UShift_test;
ARCHITECTURE behavior OF UShift_test IS
-- Component Declaration for the Unit Under Test (UUT)
COMPONENT UShift
PORT(clk : IN std_logic; il : IN std_logic; ir : IN std_logic; i : IN std_logic_vector(3 downto 0); s:IN std_logic_vector(1 downto 0);
q : OUT std_logic_vector(3 downto 0));
END COMPONENT;
--Inputs
signal clk : std_logic := '0';
signal il : std_logic := '0';
signal ir : std_logic := '0';
signal s : std_logic_vector(1 downto 0) := (others => '0');
signal i : std_logic_vector(3 downto 0) := (others => '0');
--Outputs
signal q : std_logic_vector(3 downto 0);
-- Clock period definitions
constant clk_period : time := 20 ns;
BEGIN
-- Instantiate the Unit Under Test (UUT)
uut: UShift PORT MAP (
clk => clk,
il => il,
ir => ir,
s => s,
i => i,
q => q);
-- Clock process definitions
clk_process :process
begin
clk <= '0';
wait for clk_period/2;
clk <= '1';
wait for clk_period/2;
end process;
-- Stimulus process
stim_proc: process
begin
---- test clr
ir<= '0';
wait for 40ns;
---- test parallel loading
ir<= '1';
s<= "11";
i<= "0010";
wait for 40ns;
---- test shift right
s<= "01";
il<='1';
wait;
end process;
END;