我有一个可以在一堆图纸上运行脚本的工作批处理文件。
该脚本应该运行一个 lisp 函数，但该函数似乎只在主函数运行后运行。
由于我对 lisps 了解不多，因此我将尝试提供我所拥有的信息。
lsp：
(princ "\nLoading AREAS...")
(defun c:areas(); Start the program.
(setvar "cmdecho" 0)
(if (= (getvar "tilemode") 1)
(progn
(command "_.ucs" "_world")
(setq osnp (getvar "osmode"))
(setq laag (getvar "clayer"))
(setvar "osmode" 0)
(setq dimz (getvar "dimzin"))
(setvar "dimzin" 0)
(ge_dellay ladeptmp)
(if (>= (substr (getvar "acadver") 1 2) "15")
(ge_convert)
)
(setq allsel (list (cons 0 "POLYLINE")'(-4 . "<OR")(cons 8 ladeppoly)(cons 8 ladeptraf)'(-4 . "OR>")'(-3 ("COSBI"))))
(setq depsel (list (cons 0 "POLYLINE")(cons 8 ladeppoly)'(-3 ("COSBI"))))
(setq areasel (list (cons 0 "POLYLINE")(cons 8 ladeptraf)'(-3 ("COSBI"))))
(setq textsel (list (cons 0 "TEXT")(cons 8 ladeptext)'(-3 ("COSBI"))))
(setq dcl_area (load_dialog "areas"))
(setq dcl_gen (load_dialog "general"))
(setq intp nil dparea nil seltot nil)
(ar_setdep)
(ar_dia)
(if (= what_next 1)(ar_setlay))
(if (= what_next 2)(ar_check))
(if (= what_next 3)(ar_startcheck))
(unload_dialog dcl_area)
(unload_dialog dcl_gen)
(setvar "osmode" osnp)
(setvar "clayer" laag)
(setvar "dimzin" dimz)
(ge_dellay ladeptmp)
)
(alert "Only allowed in original drawing...")
)
(princ)
)
紧随其后的是一些其他（不确定）不太重要的功能，例如 ar_dia - 它会打开一个对话框，其中包含调用其他功能的按钮。其他功能之一是 AR_LIST，这是我需要在脚本中对批处理文件打开的每个文件运行的功能。
ar_list 向下几个街区，看起来像这样
(defun ar_list(); Make department/areas list.
(setq sel (ssget "x" allsel))
(if sel
(progn
(setq temp (findfile "template.sqm"))
(if temp
(progn
(command "_.zoom" "_all")
(setq rowlist nil deplist nil)
(setq bestand (open temp "r"))
(setq row (read-line bestand))
(while row
(setq row (read-line bestand))
(if row
(progn
(setq rowlist (cons (strcase (strcat (spatie (substr row 23 14)) "_-")) rowlist))
(setq deplist (cons (strcase (spatie (substr row 23 14))) deplist))
)
)
)
(setq country (ge_dir 3 "Country"))
(ge_dwg)
(if (= (strlen dwgnaam) 9); 3to4storenr
(progn
(setq store (substr dwgnaam (- (strlen dwgnaam) 3))); 3to4storenr
(setq floor (substr dwgnaam (- (strlen dwgnaam) 5) 2)); 3to4storenr
(setq num 0)
(repeat (sslength sel)
(setq depname (cdr (cadadr (assoc -3 (entget (ssname sel num)'("COSBI"))))))
(if (not (wcmatch depname "*`island*"))
(progn
(setq ename (ssname sel num))
(command "_.area" "_a" "_o" ename "")
(ge_puntlist ename)
(setq numpol 0)
(setq selpol (ssget "_wp" puntlist allsel))
(if selpol
(repeat (sslength selpol)
(setq islname (cdr (cadadr (assoc -3 (entget (ssname selpol numpol)'("COSBI"))))))
(if (= islname (strcat depname "-island"))
(command "_s" "_o" (ssname selpol numpol) "")
)
(setq numpol (1+ numpol))
)
)
(command "")
(setq deparea (/ (getvar "area") 1000000))
(if (not (member (strcase depname) deplist))
(progn
(setq deplist (cons (strcase depname) deplist))
(setq rowlist (cons (strcase (strcat depname "_-")) rowlist))
)
)
(setq nummem (- (length deplist)(length (member (strcase depname) deplist))))
(setq deptot (nth nummem rowlist))
(vindpos "_" deptot)
(setq depareaold (substr deptot (+ pos 1)))
(if (/= depareaold "-")
(setq deparea (+ (atof depareaold) deparea))
)
(setq rowlist (subst (strcase (strcat depname "_" (rtos deparea 2 1))) (nth nummem rowlist) rowlist))
)
)
(setq num (1+ num))
)
(command "_.zoom" "_previous")
(setq rowlist (acad_strlsort rowlist)); 13-10-2014
(setq deplist (acad_strlsort deplist)); 13-10-2014
;(setq rowlist (reverse rowlist))
;(setq deplist (reverse deplist))
(ar_write)
)
(alert (strcat "Drawing name " dwgnaam " not correct, must be 9 characters.")); 3to4storenr
)
)
(alert "File TEMPLATE.SQM not found...")
)
)
(alert "No department or traffic found...")
)
)
脚本只需要运行这个命令，关闭绘图，不保存。
所以我尝试了（test.scr）
(ar_list)
quit
n
但这给了我错误：
命令：(ar_list) 错误参数类型：stringp nil
我认为 ar_list 需要来自 的东西defun c:areas，但我不知道是什么。ar_list 在命令栏中输入区域后起作用。所以我也试过
区域 (ar_list) 退出 n
，但是打开了区域对话框，并没有关闭它，阻塞了循环。此外，当我取消对话框时， ar_list 工作，但它再次打开区域对话框。我认为代码在脚本中重复出现。
任何帮助都会非常受欢迎。我在这里收到了相关帮助