1

我正在做一个自定义 clonezilla .. 一个源使用 ocs-onthefly 将本地磁盘发送到远程磁盘... custom-ocs 工作正常。

但是，由于某种原因，目的地的自定义 ocs 不起作用.. 问题是最后一行 "/usr/sbin/ocs-onthefly -s $src_ip -t $dest_disk" .. 由于某种原因，clonezilla 犹豫不决该行并提供用法/帮助输出而不是运行命令..

关于为什么 ocs-onthefly 命令不接受参数的任何想法？参数正确。如果您运行“/usr/sbin/ocs-onthefly -s 192.168.150.1 -t sda”，它运行良好。

目标脚本的自定义 ocs 在这里：https ://www.dropbox.com/s/9mfrt0n50sheayn/custom-ocs_destination-REVISED.txt

还尝试代码块：

#!/bin/bash
# Author: Steven Shiau <steven _at_ nchc org tw>
# License: GPL
# Ref: http://sourceforge.net/forum/forum.php?thread_id=1759263&forum_id=394751
# In this example, it will allow your user to use clonezilla live to choose 
# (1) backup the image of /dev/hda1 (or /dev/sda1) to /dev/hda5 (or /dev/sda5)
# (2) restore image in /dev/hda5 (or /dev/sda5) to /dev/hda1 (or /dev/sda1)

# When this script is ready, you can run
# ocs-iso -g en_US.UTF-8 -k NONE -s -m ./custom-ocs
# to create the iso file for CD/DVD. or
# ocs-live-dev -g en_US.UTF-8 -k NONE -s -c -m ./custom-ocs
# to create the zip file for USB flash drive.

# Begin of the scripts:
# Load DRBL setting and functions
DRBL_SCRIPT_PATH="${DRBL_SCRIPT_PATH:-/usr/share/drbl}"

. $DRBL_SCRIPT_PATH/sbin/drbl-conf-functions
. /etc/drbl/drbl-ocs.conf
. $DRBL_SCRIPT_PATH/sbin/ocs-functions

# load the setting for clonezilla live.
[ -e /etc/ocs/ocs-live.conf ] && . /etc/ocs/ocs-live.conf
# Load language files. For English, use "en_US.UTF-8".
ask_and_load_lang_set en_US.UTF-8

# The above is almost necessary, it is recommended to include them in your own custom-       ocs.
# From here, you can write your own scripts.

# functions
decide_sda_or_hda() {
  if [ -n "$(grep -Ew sda1 /proc/partitions)" ]; then
   disk=sda
  elif [ -n "$(grep -Ew hda1 /proc/partitions)" ]; then
   disk=hda
  else
    [ "$BOOTUP" = "color" ] && $SETCOLOR_FAILURE
    echo "No hard disk detected!"
    echo "Program terminated!"
    [ "$BOOTUP" = "color" ] && $SETCOLOR_NORMAL
  fi
  # src_part: hda1 or sda1, tgt_part: hda5 or sda5
  dest_disk=${disk}
}

##################
###### MAIN ######
##################

# Set network on destination workstation 1

# Determine if active link then set act_eth

while [ -z "$(/sbin/mii-tool 2>/dev/null | awk -F ":" '/link ok/ {print $1}')" ]; do
    dialog --title "NO LINK!!" --msgbox "\n Need an active link in order to continue!!" 6 50
done

act_eth=`/sbin/mii-tool 2>/dev/null | awk -F ":" '/link ok/ {print $1}'` 

# Set IP Address of destination workstation 1
/sbin/ifconfig $act_eth 192.168.150.2 netmask 255.255.255.0 up
/sbin/route add default gw 192.168.150.254
/bin/echo "nameserver 8.8.8.8" >> /etc/resolv.conf

# Find the disk device
decide_sda_or_hda

# Prompt for IP address of source disk

OUTPUT="./input.txt"
>$OUTPUT
dialog --title "Need SOURCE IP" --inputbox "Enter IP address of the SOURCE server: " 8 60 2>$OUTPUT
src_ip=$(<$OUTPUT)

# Ready the destination disk to receive from source (source should already be waiting in clonezilla), and contact source to start transfer to destination

/usr/sbin/ocs-onthefly -s $src_ip -t $dest_disk

当我通过 echo 测试（不在 clonezilla 中，而只是在 linux 机器上）时，$src_ip 和 $dest_disk 的对话框输出很好地输出了变量，所以我真的不知道为什么 ocs-onthefly 不接受它。

4

1 回答 1

1

看起来您的ocs-onthefly命令正在收到意外的参数。为了分析，让我们看看实际的命令

 echo /usr/sbin/ocs-onthefly -s $src_ip -t $dest_disk

或者，也许更好，运行脚本的结果是

 bash -x script

会告诉你什么是错的。

于 2013-05-18T16:57:50.127 回答