linux - 如何配置 linux 以接收来自两个不同遥控器的信号？

Question

我在电视盒上安装了armbian。原来的遥控器只有几个按钮，所以我想将第二个遥控器主要用于 KODI。原始遥控器使用 NEC 协议。第二个遥控器是 RC6 MCE。我想同时使用两者。我试图加载两个键盘映射。但这不起作用。

那么如何配置呢？

当前状态：

# ir-keytable
Found /sys/class/rc/rc1/ (/dev/input/event2) with:
    Name: gpio_ir_recv
    Driver: gpio_ir_recv, table: rc-empty
    LIRC device: /dev/lirc0
    Attached BPF protocols: Operation not supported
    Supported kernel protocols: other lirc rc-5 rc-5-sz jvc sony nec sanyo mce_kbd rc-6 sharp xmp imon 
    Enabled kernel protocols: lirc rc-6 
    bus: 25, vendor/product: 0001:0001, version: 0x0100
    Repeat delay = 500 ms, repeat period = 125 ms
Found /sys/class/rc/rc0/ (/dev/input/event1) with:
    Name: dw_hdmi
    Driver: cec, table: rc-cec
    Supported kernel protocols: cec 
    Enabled kernel protocols: cec 
    bus: 30, vendor/product: 0000:0000, version: 0x0001
    Repeat delay = 0 ms, repeat period = 125 ms