0

当 iBeacon 通过蓝牙接近 esp32 时，如何让继电器打开？通过arduino我必须为继电器分配一个引脚，以便每次iBeacon通过蓝牙关闭所有这些时它都会打开此代码检测到arduino以下代码帮助我建立esp32与iBeacon的连接但现在我没有不知道如何在每次 Ibeacon 接近时继续使继电器激活，当我知道它何时离开时，继电器会通过蓝牙和 arduino 关闭所有这些 Ide note：我已经有了 esp32 库#include <Arduino .h>

#include <BLEDevice.h>
#include <BLEUtils.h>
#include <BLEScan.h>
#include <BLEAdvertisedDevice.h>
#include <BLEEddystoneURL.h>
#include <BLEEddystoneTLM.h>
#include <BLEBeacon.h>

#define ENDIAN_CHANGE_U16(x) ((((x)&0xFF00) >> 8) + (((x)&0xFF) << 8))

int scanTime = 5; //In seconds
BLEScan *pBLEScan;

class MyAdvertisedDeviceCallbacks : public BLEAdvertisedDeviceCallbacks
{
    void onResult(BLEAdvertisedDevice advertisedDevice)
    {
      if (advertisedDevice.haveName())
      {
        Serial.print("Device name: ");
        Serial.println(advertisedDevice.getName().c_str());
        Serial.println("");
      }

      if (advertisedDevice.haveServiceUUID())
      {
        BLEUUID devUUID = advertisedDevice.getServiceUUID();
        Serial.print("Found ServiceUUID: ");
        Serial.println(devUUID.toString().c_str());
        Serial.println("");
      }
      else
      {
        if (advertisedDevice.haveManufacturerData() == true)
        {
          std::string strManufacturerData = advertisedDevice.getManufacturerData();

          uint8_t cManufacturerData[100];
          strManufacturerData.copy((char *)cManufacturerData, strManufacturerData.length(), 0);

          if (strManufacturerData.length() == 25 && cManufacturerData[0] == 0x4C && cManufacturerData[1] == 0x00)
          {
            Serial.println("Found an iBeacon!");
            BLEBeacon oBeacon = BLEBeacon();
            oBeacon.setData(strManufacturerData);
            Serial.printf("iBeacon Frame\n");
            Serial.printf("ID: %04X Major: %d Minor: %d UUID: %s Power: %d\n", oBeacon.getManufacturerId(), ENDIAN_CHANGE_U16(oBeacon.getMajor()), ENDIAN_CHANGE_U16(oBeacon.getMinor()), oBeacon.getProximityUUID().toString().c_str(), oBeacon.getSignalPower());
          }
         
        }
        
      }

      uint8_t *payLoad = advertisedDevice.getPayload();

      BLEUUID checkUrlUUID = (uint16_t)0xfeaa;

      if (advertisedDevice.getServiceUUID().equals(checkUrlUUID))
      {
        if (payLoad[11] == 0x10)
        {
          Serial.println("Found an EddystoneURL beacon!");
          BLEEddystoneURL foundEddyURL = BLEEddystoneURL();
          std::string eddyContent((char *)&payLoad[11]); // incomplete EddystoneURL struct!

          foundEddyURL.setData(eddyContent);
          std::string bareURL = foundEddyURL.getURL();
          if (bareURL[0] == 0x00)
          {
            size_t payLoadLen = advertisedDevice.getPayloadLength();
            Serial.println("DATA-->");
            for (int idx = 0; idx < payLoadLen; idx++)
            {
              Serial.printf("0x%08X ", payLoad[idx]);
            }
            Serial.println("\nInvalid Data");
            return;
          }

          Serial.printf("Found URL: %s\n", foundEddyURL.getURL().c_str());
          Serial.printf("Decoded URL: %s\n", foundEddyURL.getDecodedURL().c_str());
          Serial.printf("TX power %d\n", foundEddyURL.getPower());
          Serial.println("\n");
        }
        else if (payLoad[11] == 0x20)
        {
          Serial.println("Found an EddystoneTLM beacon!");
          BLEEddystoneTLM foundEddyURL = BLEEddystoneTLM();
          std::string eddyContent((char *)&payLoad[11]); // incomplete EddystoneURL struct!

          eddyContent = "01234567890123";

          for (int idx = 0; idx < 14; idx++)
          {
            eddyContent[idx] = payLoad[idx + 11];
          }

          foundEddyURL.setData(eddyContent);
          Serial.printf("Reported battery voltage: %dmV\n", foundEddyURL.getVolt());
          Serial.printf("Reported temperature from TLM class: %.2fC\n", (double)foundEddyURL.getTemp());
          int temp = (int)payLoad[16] + (int)(payLoad[15] << 8);
          float calcTemp = temp / 256.0f;
          Serial.printf("Reported temperature from data: %.2fC\n", calcTemp);
          Serial.printf("Reported advertise count: %d\n", foundEddyURL.getCount());
          Serial.printf("Reported time since last reboot: %ds\n", foundEddyURL.getTime());
          Serial.println("\n");
          Serial.print(foundEddyURL.toString().c_str());
          Serial.println("\n");
        }
      }
    }
};

void setup()
{
  Serial.begin(115200);
  Serial.println("Scanning...");

  BLEDevice::init("");
  pBLEScan = BLEDevice::getScan(); //create new scan
  pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks());
  pBLEScan->setActiveScan(true); //active scan uses more power, but get results faster
  pBLEScan->setInterval(100);
  pBLEScan->setWindow(99); // less or equal setInterval value
}

void loop()
{
  // put your main code here, to run repeatedly:
  BLEScanResults foundDevices = pBLEScan->start(scanTime, false);
  Serial.print("Devices found: ");
  Serial.println(foundDevices.getCount());
  Serial.println("Scan done!");
  pBLEScan->clearResults(); // delete results fromBLEScan buffer to release memory
  delay(2000);
}
4

1 回答 1

0

你可以这样做：

#include <BLEUtils.h>
#include <BLEScan.h>
#include <BLEAdvertisedDevice.h>
#include <BLEAddress.h>
#include <Ticker.h>
 
String Adresse = "00:15:83:40:7c:bc"; // Bluetooth MAC to watch for
const int RelaisPin = 22;             // pin of relay to swiwtch
int Verzoegerung = 15;                // delay after which the relay will be switched when BLE device is out of range
 
int VerzoegerungZaeler = 0;
Ticker Tic;
static BLEAddress *pServerAddress;
BLEScan* pBLEScan ;
int scanTime = 30; //In seconds
 
 
class MyAdvertisedDeviceCallbacks: public BLEAdvertisedDeviceCallbacks
{
    void onResult(BLEAdvertisedDevice advertisedDevice) // when BLE device is found
    {
      Serial.print(advertisedDevice.getAddress().toString().c_str()); // show MAC of BLE
      if (advertisedDevice.getAddress().equals(*pServerAddress))      // compare MAC
      {
        Serial.print(" Ueberwachte Adresse");                         // monitored MAC found
        digitalWrite (RelaisPin, 0);                                  // switch relay
        VerzoegerungZaeler = 0;                                       // reset delay
        advertisedDevice.getScan()->stop();                           // stop scanning
      } // Found our server
      Serial.println("");
    }
};
 
void SekundenTic()  // once per second
{
VerzoegerungZaeler++;  // time counter
if (VerzoegerungZaeler >= Verzoegerung) digitalWrite (RelaisPin, 1); // switch off after delay
}
 
void setup() 
{
  pinMode (RelaisPin, OUTPUT);
  digitalWrite (RelaisPin, 1);
  Serial.begin(115200);
  Serial.println("");
  Serial.println("Starte BLE Scanner");
  pServerAddress = new BLEAddress(Adresse.c_str());
  BLEDevice::init("");
  pBLEScan = BLEDevice::getScan(); // create new scan
  pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks());
  pBLEScan->setActiveScan(true); // active scan uses more power, but get results faster
  Tic.attach( 1,SekundenTic);
}
 
void loop()
{
  pBLEScan->start(scanTime);
  delay(2000);      // scan every 2s for devices
}
于 2021-07-18T10:41:27.603 回答