在我们的项目中，我们使用 teaspoon 和 jasmine 作为套件来运行所有测试用例。在使用 command 运行RAILS_ENV=test bundle exec teaspoonteaspoon 时，我们收到 pahntomjs 崩溃错误并且 teaspoon 停止。
.................................*.............................................................1 0x1b67967 /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x1b67967]
2 0x1baac35 /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x1baac35]
3 0x1b9369c /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x1b9369c]
4 0x18970ad /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x18970ad]
5 0x1896ace /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x1896ace]
6 0x1896ddf /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x1896ddf]
7 0x190663e /home/manikantasailokam/.phantomjs/2.1.1/x86_64-linux/bin/phantomjs() [0x190663e]
8 0x7f2d993d1180 [0x7f2d993d1180]
PhantomJS has crashed. Please read the bug reporting guide at
<http://phantomjs.org/bug-reporting.html> and file a bug report.
Segmentation fault (core dumped)
Failed to use phantomjs, which exited with status code: 139
可能是由于一些测试用例，但我们有大约 10000 个测试用例并且很难找到其中一个，有什么方法可以用堆栈跟踪记录错误？
teaspoon_env.rb 文件：
Teaspoon.configure do |config|
# Determines where the Teaspoon routes will be mounted. Changing this to "/jasmine" would allow you to browse to
# `http://localhost:3000/jasmine` to run your tests.
config.mount_at = "/teaspoon"
# Specifies the root where Teaspoon will look for files. If you're testing an engine using a dummy application it can
# be useful to set this to your engines root (e.g. `Teaspoon::Engine.root`).
# Note: Defaults to `Rails.root` if nil.
config.root = nil
# Paths that will be appended to the Rails assets paths
# Note: Relative to `config.root`.
config.asset_paths = ["spec/javascripts", "spec/javascripts/stylesheets"]
# Fixtures are rendered through a controller, which allows using HAML, RABL/JBuilder, etc. Files in these paths will
# be rendered as fixtures.
config.fixture_paths = ["spec/javascripts/fixtures"]
# SUITES
# You can modify the default suite configuration and create new suites here. Suites are isolated from one another.
#
# When defining a suite you can provide a name and a block. If the name is left blank, :default is assumed. You can
# omit various directives and the ones defined in the default suite will be used.
#
# To run a specific suite
# - in the browser: http://localhost/teaspoon/[suite_name]
# - with the rake task: rake teaspoon suite=[suite_name]
# - with the cli: teaspoon --suite=[suite_name]
config.suite do |suite|
# Specify the framework you would like to use. This allows you to select versions, and will do some basic setup for
# you -- which you can override with the directives below. This should be specified first, as it can override other
# directives.
# Note: If no version is specified, the latest is assumed.
#
# Versions: 1.3.1, 2.0.3, 2.1.3, 2.2.0, 2.2.1, 2.3.4
suite.use_framework :jasmine, "2.3.4"
# Specify a file matcher as a regular expression and all matching files will be loaded when the suite is run. These
# files need to be within an asset path. You can add asset paths using the `config.asset_paths`.
#{A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z}
# a,b,c,d,e,f,g,h,i,j,k,l,m,n,o,p,q,r,s,t,u,v,w,x,y,z
suite.matcher = "{spec/javascripts,app/assets}/**/*Spec.{js,js.coffee,coffee}"
# Load additional JS files, but requiring them in your spec helper is the preferred way to do this.
#suite.javascripts = []
# You can include your own stylesheets if you want to change how Teaspoon looks.
# Note: Spec related CSS can and should be loaded using fixtures.
#suite.stylesheets = ["teaspoon"]
# This suites spec helper, which can require additional support files. This file is loaded before any of your test
# files are loaded.
suite.helper = "spec_helper.js"
# Partial to be rendered in the head tag of the runner. You can use the provided ones or define your own by creating
# a `_boot.html.erb` in your fixtures path, and adjust the config to `"/boot"` for instance.
#
# Available: boot, boot_require_js
suite.boot_partial = "boot"
# Partial to be rendered in the body tag of the runner. You can define your own to create a custom body structure.
suite.body_partial = "body"
# Hooks allow you to use `Teaspoon.hook("fixtures")` before, after, or during your spec run. This will make a
# synchronous Ajax request to the server that will call all of the blocks you've defined for that hook name.
#suite.hook :fixtures, &proc{}
# Determine whether specs loaded into the test harness should be embedded as individual script tags or concatenated
# into a single file. Similar to Rails' asset `debug: true` and `config.assets.debug = true` options. By default,
# Teaspoon expands all assets to provide more valuable stack traces that reference individual source files.
#suite.expand_assets = true
# Non-.js file extensions Teaspoon should consider JavaScript files
#suite.js_extensions = [/(\.js)?.coffee/, /(\.js)?.es6/, ".es6.js"]
end
config.suite :component_suite do |suite|
suite.use_framework :jasmine, "2.3.4"
suite.matcher = "{spec/javascripts/components,spec/javascripts/dataModel}/**/*Spec.{js}"
suite.helper = "component_spec_helper.js"
suite.boot_partial = "boot"
suite.body_partial = "body"
#suite.expand_assets = false
end
# Example suite. Since we're just filtering to files already within the root test/javascripts, these files will also
# be run in the default suite -- but can be focused into a more specific suite.
#config.suite :targeted do |suite|
# suite.matcher = "spec/javascripts/targeted/*_spec.{js,js.coffee,coffee}"
#end
# CONSOLE RUNNER SPECIFIC
#
# These configuration directives are applicable only when running via the rake task or command line interface. These
# directives can be overridden using the command line interface arguments or with ENV variables when using the rake
# task.
#
# Command Line Interface:
# teaspoon --driver=phantomjs --server-port=31337 --fail-fast=true --format=junit --suite=my_suite /spec/file_spec.js
#
# Rake:
# teaspoon DRIVER=phantomjs SERVER_PORT=31337 FAIL_FAST=true FORMATTERS=junit suite=my_suite
# Specify which headless driver to use. Supports PhantomJS, Selenium Webdriver and BrowserStack Webdriver.
#
# Available: :phantomjs, :selenium, :browserstack, :capybara_webkit
# PhantomJS: https://github.com/modeset/teaspoon/wiki/Using-PhantomJS
# Selenium Webdriver: https://github.com/modeset/teaspoon/wiki/Using-Selenium-WebDriver
# BrowserStack Webdriver: https://github.com/modeset/teaspoon/wiki/Using-BrowserStack-WebDriver
# Capybara Webkit: https://github.com/modeset/teaspoon/wiki/Using-Capybara-Webkit
#config.driver = :phantomjs
# Specify additional options for the driver.
#
# PhantomJS: https://github.com/modeset/teaspoon/wiki/Using-PhantomJS
# Selenium Webdriver: https://github.com/modeset/teaspoon/wiki/Using-Selenium-WebDriver
# BrowserStack Webdriver: https://github.com/modeset/teaspoon/wiki/Using-BrowserStack-WebDriver
# Capybara Webkit: https://github.com/modeset/teaspoon/wiki/Using-Capybara-Webkit
#config.driver_options = nil
# Specify the timeout for the driver. Specs are expected to complete within this time frame or the run will be
# considered a failure. This is to avoid issues that can arise where tests stall.
config.driver_timeout = 600
# Specify a server to use with Rack (e.g. thin, mongrel). If nil is provided Rack::Server is used.
#config.server = nil
# Specify a host to run on a specific host, otherwise Teaspoon will use 127.0.0.1.
#config.server_host = nil
# Specify a port to run on a specific port, otherwise Teaspoon will use a random available port.
#config.server_port = nil
# Timeout for starting the server in seconds. If your server is slow to start you may have to bump this, or you may
# want to lower this if you know it shouldn't take long to start.
#config.server_timeout = 20
# Force Teaspoon to fail immediately after a failing suite. Can be useful to make Teaspoon fail early if you have
# several suites, but in environments like CI this may not be desirable.
#config.fail_fast = true
# Specify the formatters to use when outputting the results.
# Note: Output files can be specified by using `"junit>/path/to/output.xml"`.
#
# Available: :dot, :clean, :documentation, :json, :junit, :pride, :rspec_html, :snowday, :swayze_or_oprah, :tap, :tap_y, :teamcity
#config.formatters = [:dot]
# Specify if you want color output from the formatters.
#config.color = true
# Teaspoon pipes all console[log/debug/error] to $stdout. This is useful to catch places where you've forgotten to
# remove them, but in verbose applications this may not be desirable.
config.suppress_log = false
# COVERAGE REPORTS / THRESHOLD ASSERTIONS
#
# Coverage reports requires Istanbul (https://github.com/gotwarlost/istanbul) to add instrumentation to your code and
# display coverage statistics.
#
# Coverage configurations are similar to suites. You can define several, and use different ones under different
# conditions.
#
# To run with a specific coverage configuration
# - with the rake task: rake teaspoon USE_COVERAGE=[coverage_name]
# - with the cli: teaspoon --coverage=[coverage_name]
# Specify that you always want a coverage configuration to be used. Otherwise, specify that you want coverage
# on the CLI.
# Set this to "true" or the name of your coverage config.
config.use_coverage = true
# You can have multiple coverage configs by passing a name to config.coverage.
# e.g. config.coverage :ci do |coverage|
# The default coverage config name is :default.
config.coverage do |coverage|
# Which coverage reports Istanbul should generate. Correlates directly to what Istanbul supports.
#
# Available: text-summary, text, html, lcov, lcovonly, cobertura, teamcity
coverage.reports = ["text-summary", "cobertura", "html"]
# The path that the coverage should be written to - when there's an artifact to write to disk.
# Note: Relative to `config.root`.
coverage.output_path = "coverage"
# Assets to be ignored when generating coverage reports. Accepts an array of filenames or regular expressions. The
# default excludes assets from vendor, gems and support libraries.
coverage.ignore = [%r{/lib/ruby/gems/},%r{/app/assets/javascripts/boomerang/}, %r{/app/assets/javascripts/(.+)-lib.js},
%r{/app/assets/javascripts/algolia/},
%r{/app/assets/javascripts/common/BuilderWidget.js},%r{/vendor/assets/},%r{/app/assets/javascripts/threejs/},
%r{/support/}, %r{/app/assets/javascripts/ovisto.js},%r{/app/assets/javascripts/dataModels/all-models/BuilderAccessibilityUtils.js},%r{/app/assets/javascripts/templates/},%r{/app/assets/javascripts/builder-widget/templates/},%r{/app/assets/javascripts/third-party/},%r{/app/assets/javascripts/product-views/allView/Web3DPreview.js},%r{app/assets/javascripts/dataModels/all-models/ThreeJSUtils.js},%r{/app/assets/javascripts/boomerangLib.js},%r{/app/assets/javascripts/common-views/jquery.doubletap.js},%r{/app/assets/javascripts/memcachedPurge/MemcachedPurge.js},%r{/spec/javascripts/helpers/jasmine-jquery_2.js},%r{/app/assets/javascripts/dataModels/all-models/LayoutAutomationHelper.js}]
# Various thresholds requirements can be defined, and those thresholds will be checked at the end of a run. If any
# aren't met the run will fail with a message. Thresholds can be defined as a percentage (0-100), or nil.
#coverage.statements = nil
#coverage.functions = nil
#coverage.branches = nil
coverage.lines = $teaspoon_coverage_minimum ? $teaspoon_coverage_minimum : 65.5
end
config.coverage :component_coverage do |coverage|
coverage.reports = ["text-summary", "cobertura", "html"]
coverage.output_path = "coverage"
coverage.ignore = [%r{/lib/ruby/gems/},%r{/app/assets/javascripts/boomerang/}, %r{/app/assets/javascripts/(.+)-lib.js},
%r{/app/assets/javascripts/components/(.+)Template.jst.ejs},%r{/app/assets/javascripts/algolia/},%r{/app/assets/javascripts/builder-widget/},%r{/app/assets/javascripts/document-printing-views/},
%r{/app/assets/javascripts/dataModels/}, %r{/app/assets/javascripts/canvas-supported-views/},%r{/spec/javascripts/helpers/},
%r{/app/assets/javascripts/common-views/},%r{/app/assets/javascripts/prints-views/},%r{/app/assets/javascripts/product-views/},
%r{/app/assets/javascripts/archive-views/},%r{/app/assets/javascripts/builder-widget/},%r{/app/assets/javascripts/common/BuilderWidget.js},%r{/vendor/assets/},%r{/app/assets/javascripts/threejs/},
%r{/support/}, %r{/app/assets/javascripts/ovisto.js},%r{/app/assets/javascripts/dataModels/all-models/BuilderAccessibilityUtils.js},%r{/app/assets/javascripts/templates/},%r{/app/assets/javascripts/builder-widget/templates/},%r{/app/assets/javascripts/third-party/},%r{/app/assets/javascripts/product-views/allView/Web3DPreview.js},%r{app/assets/javascripts/dataModels/all-models/ThreeJSUtils.js},%r{/app/assets/javascripts/boomerangLib.js},%r{/app/assets/javascripts/common-views/jquery.doubletap.js},%r{/app/assets/javascripts/memcachedPurge/MemcachedPurge.js},%r{/spec/javascripts/helpers/jasmine-jquery_2.js},%r{/app/assets/javascripts/dataModels/all-models/LayoutAutomationHelper.js}]
coverage.lines = $teaspoon_coverage_minimum ? $teaspoon_coverage_minimum : 95
end
end
有什么方法可以将错误记录到控制台/终端至少具有导致此问题的文件名。我们使用茶匙的默认套件
提前致谢