0

（编辑）-我能够弄清楚，以防万一有人需要它...

只需要添加几行：

dim WSHShell, DesktopPath, objFSO

set objFSO=CreateObject("Scripting.FileSystemObject")
Set WSHshell = CreateObject("WScript.Shell")
DesktopPath = WSHShell.SpecialFolders("Desktop")

strWorkBook = (DesktopPath) & "\" & WshNetwork.ComputerName & "_" & WshNetwork.UserName & "-hardware.xls"

我相信这个问题对于你们中的一个脚本人员来说不会有问题。我是系统管理员，所以我的脚本技能还不够快。

我有一个 vbs 脚本，我一直在破解它以使用一些定义的标准来清点用户 PC。

执行时，脚本基本上会创建一个 Excel 文件，然后收集一些信息并写入该文件。我的问题是我必须为 xls 输出指定路径，目前它将文件直接保存到 C:\ 驱动器。对于内部用户，我刚刚使用 UNC 路径保存文件，但对于可能无法访问网络的外部用户，我需要此文件。

我想将路径自动设置为用户配置文件，就像在 bat 脚本中一样：%UserProfile%\Desktop\somefolder

我只是不熟悉 .vbs 有没有简单的方法可以做到这一点？这是脚本，你可能会注意到里面有一些额外的东西，忽略它，它来自这个脚本的先前版本。

TLDR - 如何使路径自动设置为用户桌面（Win XP 和 7）？

像往常一样，非常感谢您阅读和/或回答！ 

Set WshNetwork = WScript.CreateObject("WScript.Network")

strComputer = "."

strWorkBook = "C:\" & WshNetwork.ComputerName & "_" & WshNetwork.UserName & "-hardware.xls"

' Create Excel Spreadsheet
strFileName = "C:\" & WshNetwork.ComputerName & "_" & WshNetwork.UserName & "-hardware.xls"
Set objExcel = CreateObject("Excel.Application")
objExcel.Visible = True
Set objWorkbook = objExcel.Workbooks.Add()
objWorkbook.SaveAs(strFileName)
objExcel.Quit
Set app = CreateObject("Excel.Application")
app.Workbooks.Open strWorkBook
Set wb = app.ActiveWorkbook
app.Visible = False
wb.Activate
Set ws = wb.Worksheets(1)
ws.Cells(1,1).Value = "System Name"
ws.Columns(1).ColumnWidth = 20

ws.Cells(1,2).Value = "Username"
ws.Columns(2).ColumnWidth = 30

ws.Cells(1,3).Value = "Main/Test System"
ws.Columns(3).ColumnWidth = 30

ws.Cells(1,4).Value = "Special Applications"
ws.Columns(4).ColumnWidth = 30

ws.Cells(1,5).Value = "Location of the system"
ws.Columns(5).ColumnWidth = 30

ws.Cells(1,6).Value = "Used by which department"
ws.Columns(6).ColumnWidth = 30

ws.Cells(1,7).Value = "if not DHCP / ip address"
ws.Columns(7).ColumnWidth = 30

ws.Cells(1,8).Value = "local admin rights"
ws.Columns(8).ColumnWidth = 30

ws.Cells(1,9).Value = "Operating System"
ws.Columns(9).ColumnWidth = 40

ws.Cells(1,10).Value = "Disk space available on hard drive"
ws.Columns(10).ColumnWidth = 20

ws.Cells(1,11).Value = "CPU"
ws.Columns(11).ColumnWidth = 30

ws.Cells(1,12).Value = "Total Memory"
ws.Columns(12).ColumnWidth = 20

ws.Cells(1,13).Value = "Manufacturer"
ws.Columns(13).ColumnWidth = 20

ws.Cells(1,14).Value = "Model"
ws.Columns(14).ColumnWidth = 20

ws.Cells(1,15).Value = "Serial Number"
ws.Columns(15).ColumnWidth = 30

ws.Rows(1).Font.Bold = True

' Get the serial number first to see if it already exists in the spreadsheet
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_BIOS",,48)
For Each objItem In colItems
strSerialNumber = "" & objItem.SerialNumber
Next
Set objWMIService = Nothing
Set colItems = Nothing

intRowToUse = -1
For intRowCount = 2 To ws.UsedRange.Rows.Count
      If Trim(strSerialNumber) = Trim(ws.Cells(intRowCount,5).Value) Then
            intRowToUse = intRowCount
      End If
Next
If intRowToUse = -1 Then
      intRowToUse = ws.UsedRange.Rows.Count + 1
End If

' Get Computer System Details
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_ComputerSystem",,48)
For Each objItem In colItems
    ws.Cells(intRowToUse,1).Value = "" & objItem.Caption 
    ws.Cells(intRowToUse,2).Value = "" & objItem.UserName
    ws.Cells(intRowToUse,13).Value = "" & objItem.Manufacturer
    ws.Cells(intRowToUse,14).Value = "" & objItem.Model
Next
Set objWMIService = Nothing
Set colItems = Nothing
'
'Output the Serial Number
ws.Cells(intRowToUse,15).Value = strSerialNumber

'
' Get CPU Details
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_Processor",,48)
For Each objItem In colItems
    ws.Cells(intRowToUse,11).Value = "" & objItem.Name 
Next
Set objWMIService = Nothing
Set colItems = Nothing
'
' Get C: free space
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_LogicalDisk where DeviceID='c:'",,48)
For Each objItem In colItems
        ws.Cells(intRowToUse,10).Value = "" & FormatNumber(objItem.FreeSpace/1024/1024/1024,0) & "GB"
Next
Set objWMIService = Nothing
Set colItems = Nothing
'
' Get OS Details
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colItems = objWMIService.ExecQuery("Select * from Win32_OperatingSystem",,48)
For Each objItem In colItems
    ws.Cells(intRowToUse,9).Value = "" & objItem.Caption
    ws.Cells(intRowToUse,12).Value = "" & FormatNumber(objItem.TotalVisibleMemorySize/1024/1024,0) & "GB"  
Next
Set objWMIService = Nothing
Set colItems = Nothing
'
' Get & Writeout current Date
'ws.Cells(intRowToUse,12).value = "" & Month(Now) & "-" & Day(Now) & "-" & Year(Now)

'Autofit all columns
app.ActiveSheet.Columns.EntireColumn.AutoFit
' Save Audit File
app.DisplayAlerts = False
'wb.Saved = True
wb.Close True
app.DisplayAlerts = False
app.quit

MsgBox "Done"
'=====================
4

1 回答 1

0

只需要添加几行

dim WSHShell, DesktopPath, objFSO

set objFSO=CreateObject("Scripting.FileSystemObject")
Set WSHshell = CreateObject("WScript.Shell")
DesktopPath = WSHShell.SpecialFolders("Desktop")

strWorkBook = (DesktopPath) & "\" & WshNetwork.ComputerName & "_" & WshNetwork.UserName & "-hardware.xls"
于 2011-07-26T22:37:00.787 回答