GEKKO是混合整数和微分代数方程的优化软件。它与large-scale solversforlinear, quadratic, nonlinear和混合整数规划 ( LP, QP, NLP, MILP, MINLP) 结合使用。我gekko用来控制我的TCLab Arduino，但是当我给它一个干扰时，无论我如何调整参数，都会有一个过冲的温度。我怎么解决这个问题？
这是我的代码：
import tclab
import numpy as np
import time
import matplotlib.pyplot as plt
from gekko import GEKKO
# Connect to Arduino
a = tclab.TCLab()
# Get Version
print(a.version)
# Turn LED on
print('LED On')
a.LED(100)
# Run time in minutes
run_time = 60.0
# Number of cycles
loops = int(60.0*run_time)
tm = np.zeros(loops)
# Temperature (K)
T1 = np.ones(loops) * a.T1 # temperature (degC)
Tsp1 = np.ones(loops) * 35.0 # set point (degC)
# heater values
Q1s = np.ones(loops) * 0.0
#########################################################
# Initialize Model
#########################################################
# use remote=True for MacOS
m = GEKKO(name='tclab-mpc',remote=False)
# 100 second time horizon
m.time = np.linspace(0,100,101)
# Parameters
Q1_ss = m.Param(value=0)
TC1_ss = m.Param(value=a.T1)
Kp = m.Param(value=0.8)
tau = m.Param(value=160.0)
# Manipulated variable
Q1 = m.MV(value=0)
Q1.STATUS = 1 # use to control temperature
Q1.FSTATUS = 0 # no feedback measurement
Q1.LOWER = 0.0
Q1.UPPER = 100.0
Q1.DMAX = 50.0
# Q1.COST = 0.0
Q1.DCOST = 0.2
# Controlled variable
TC1 = m.CV(value=TC1_ss.value)
TC1.STATUS = 1 # minimize error with setpoint range
TC1.FSTATUS = 1 # receive measurement
TC1.TR_INIT = 2 # reference trajectory
TC1.TR_OPEN = 2 # reference trajectory
TC1.TAU = 35 # time constant for response
m.Equation(tau * TC1.dt() + (TC1-TC1_ss) == Kp * (Q1-Q1_ss))
# Global Options
m.options.IMODE = 6 # MPC
m.options.CV_TYPE = 1 # Objective type
m.options.NODES = 2 # Collocation nodes
m.options.SOLVER = 1 # 1=APOPT, 3=IPOPT
##################################################################
# Create plot
plt.figure()
plt.ion()
plt.show()
filter_tc1 = []
def movefilter(predata, new, n):
if len(predata) < n:
predata.append(new)
else:
predata.pop(0)
predata.append(new)
return np.average(predata)
# Main Loop
start_time = time.time()
prev_time = start_time
try:
for i in range(1,loops):
# Sleep time
sleep_max = 1.0
sleep = sleep_max - (time.time() - prev_time)
if sleep>=0.01:
time.sleep(sleep)
else:
time.sleep(0.01)
# Record time and change in time
t = time.time()
dt = t - prev_time
prev_time = t
tm[i] = t - start_time
# Read temperatures in Kelvin
curr_T1 = a.T1
last_T1 = curr_T1
avg_T1 = movefilter(filter_tc1, last_T1, 3)
T1[i] = curr_T1
###############################
### MPC CONTROLLER ###
###############################
TC1.MEAS = avg_T1
# input setpoint with deadband +/- DT
DT = 0.1
TC1.SPHI = Tsp1[i] + DT
TC1.SPLO = Tsp1[i] - DT
# solve MPC
m.solve(disp=False)
# test for successful solution
if (m.options.APPSTATUS==1):
# retrieve the first Q value
Q1s[i] = Q1.NEWVAL
else:
# not successful, set heater to zero
Q1s[i] = 0
# Write output (0-100)
a.Q1(Q1s[i])
# Plot
plt.clf()
ax=plt.subplot(2,1,1)
ax.grid()
plt.plot(tm[0:i],T1[0:i],'ro',MarkerSize=3,label=r'$T_1$')
plt.plot(tm[0:i],Tsp1[0:i],'b-',MarkerSize=3,label=r'$T_1 Setpoint$')
plt.ylabel('Temperature (degC)')
plt.legend(loc='best')
ax=plt.subplot(2,1,2)
ax.grid()
plt.plot(tm[0:i],Q1s[0:i],'r-',LineWidth=3,label=r'$Q_1$')
plt.ylabel('Heaters')
plt.xlabel('Time (sec)')
plt.legend(loc='best')
plt.draw()
plt.pause(0.05)
# Turn off heaters
a.Q1(0)
a.Q2(0)
print('Shutting down')
a.close()
# Allow user to end loop with Ctrl-C
except KeyboardInterrupt:
# Disconnect from Arduino
a.Q1(0)
a.Q2(0)
print('Shutting down')
a.close()
# Make sure serial connection still closes when there's an error
except:
# Disconnect from Arduino
a.Q1(0)
a.Q2(0)
print('Error: Shutting down')
a.close()
raise
有测试结果图。
