0

当 SNMP 行走或使用“单一 OID 查看器”探测时，我可以检索任何 OID 信息。但是，当尝试使用交互式 snmp 探针创建器中的自定义探针时，所有 OID 都返回“[N/A]”

任何帮助将不胜感激。

我在下面为上下文添加更多信息 1. 自定义探针的代码片段 2. 我的期望 3. 我的代码返回什么

  1. 下面是我需要的 OID 变量的示例代码

-- 代码的目的是记录设备的状态数据，并为用户显示设备状态。

<snmp-device-variables>
TLPPOIName_,     spvLDasName.${Slot},DEFAULT, "TLPPOIName"
PoiDescription_, spvLDasCommercialDescription.${Slot},DEFAULT, "PoiDescription"
PoiAttDl1_,      spvLDasAttDigDl.${Slot}.1,DEFAULT,         "Poi Attenuation Dl path 1"
PoiAttDl2_,      spvLDasAttDigDl.${Slot}.2,DEFAULT,         "Poi Attenuation Dl path 2"
PeakPwr1_,       spvLDasPeakPwrDl.${slot}.1, DEFAULT,       "PeakPwr path 1"
PeakPwr2_,       spvLDasPeakPwrDl.${slot}.2, DEFAULT,       "PeakPwr path 2"
PwrAlarm_,       spvLDasPwrAlarmHysteresis.${Slot},DEFAULT, "PwrAlarm"
</snmp-device-variables>`


<datasets>
     $PoiAttDl1_, "PoiAttDl1", "dB", "true", "Poi Attenuation Dl path 1"
     $PoiAttDl2_, "PoiAttDl2", "dB", "true", "Poi Attenuation Dl path 2"
     $PeakPwr1_,  "PeakPwr1", "dBm", "true", "PeakPwr path 1"
     $PeakPwr2_,  "PeakPwr2", "dBm", "true", "PeakPwr path 2"
     $PwrAlarm_,  "PwrAlarm", "dBm", "true", "PwrAlarm"  
</datasets>`


<snmp-device-display>
\B5\TLPPOI\P0\
\4\ TLPPOIName:\0\ $TLPPOIName_\M0\
\4\ PoiDescription:\0\$PoiDescription_ \M0\
\4\ Poi Attenuation Dl path 1:\0\$PoiAttDl1_ \M0\
\4\ Poi Attenuation Dl path 2:\0\$PoiAttDl2_ \M0\
\4\ PeakPwr path 1:\0\$PeakPwr1_ \M0\
\4\ PeakPwr path 2:\0\$PeakPwr2_ \M0\
\4\ PwrAlarm:\0\$PwrAlarm_\M0\
</snmp-device-display>
  1. SNMP walk 结果：下面是我希望看到的值的示例 VZW 800 20 2
  2. 使用我编写的自定义探针后的显示窗口 TLPPOIName: [N/A]
4

0 回答 0