最近我买了一个 R-Car M3 开发板。按照 elinux.org/.../Yocto-Gen3 上的步骤，我已经使用 YOCTO 3.9.0 成功构建了嵌入式 Linux 映像
我还按照 elinux.org/.../M3SK 上的步骤更新了主板的固件。
现在我正在尝试从 SD 卡启动 Linux 映像，但是当我打开我的板时，我收到错误“MMC init fail”。我知道我可以访问 SD 卡并加载保存在那里的图像。但是当尝试从 SD 卡启动时，它会停止启动并显示以下消息“mmc0：初始化 MMC 卡时出现错误 -110”
尝试启动时似乎出现此错误是因为板无法初始化 mmc。有没有人面临同样的问题？有人可以帮我解决吗？
引导日志
Welcome to minicom 2.7
OPTIONS: I18n
Compiled on Nov 15 2018, 20:18:47.
Port /dev/ttyUSB0, 22:57:14
Press CTRL-A Z for help on special keys
[ 0.000190] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.21
[ 0.005752] NOTICE: BL2: PRR is R-Car M3 Ver.1.0
[ 0.010421] NOTICE: BL2: Board is Starter Kit Rev.1.0
[ 0.015533] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.020959] NOTICE: BL2: LCM state is CM
[ 0.025001] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.030988] NOTICE: BL2: DDR3200(rev.0.33)NOTICE: [COLD_BOOT]NOTICE: ..0
[ 0.086074] NOTICE: BL2: DRAM Split is 2ch
[ 0.089960] NOTICE: BL2: QoS is default setting(rev.0.19)
[ 0.095463] NOTICE: BL2: Lossy Decomp areas
[ 0.099636] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
[ 0.106721] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
[ 0.113633] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
[ 0.120548] NOTICE: BL2: v1.4(release):15dba6b
[ 0.125038] NOTICE: BL2: Built : 05:48:04, Feb 18 2019
[ 0.130225] NOTICE: BL2: Normal boot
[ 0.133871] NOTICE: BL2: dst=0xe6320d00 src=0x8180000 len=512(0x200)
[ 0.140254] NOTICE: BL2: dst=0x43f00000 src=0x8180400 len=6144(0x1800)
[ 0.146875] NOTICE: BL2: dst=0x44000000 src=0x81c0000 len=65536(0x10000)
[ 0.154105] NOTICE: BL2: dst=0x44100000 src=0x8200000 len=1048576(0x100000)
[ 0.168928] NOTICE: BL2: dst=0x50000000 src=0x8640000 len=1048576(0x100000)
U-Boot 2015.04 (Feb 17 2019 - 23:28:11)
CPU: Renesas Electronics R8A7796 rev 1.0
Board: M3ULCB
I2C: ready
DRAM: 1.9 GiB
Bank #0: 0x048000000 - 0x07fffffff, 896 MiB
Bank #1: 0x600000000 - 0x63fffffff, 1 GiB
MMC: sh-sdhi: 0, sh-sdhi: 1
MMC init failed
Using default environment
In: serial
Out: serial
Err: serial
Net: Board Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot: 0
=> mmc dev 0
switch to partitions #0, OK
mmc0 is current device
=> mmc info
Device: sh-sdhi
Manufacturer ID: 3
OEM: 5344
Name: SC64G
Tran Speed: 50000000
Rd Block Len: 512
SD version 3.0
High Capacity: Yes
Capacity: 59.5 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
=> ext2ls mmc 0:1 /boot
<DIR> 4096 .
<DIR> 4096 ..
<SYM> 28 Image
18522624 Image-4.14.35-yocto-standard
67069 Image-r8a7796-m3ulcb.dtb
67069 r8a7796-m3ulcb.dtb
67069 Image--4.14.35+git0+118adc53e8-r1-r8a7796-m3ulcb-2019021804481b
=> setenv bootargs 'rw root=/dev/mmcblk0p1 rootfstype=ext4 rootwait'
=> saveenv
Saving Environment to MMC...
MMC init failed
**END OF BOOTING LOG**
**DTB file Information**
sd@ee100000 {
compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi";
reg = <0x0 0xee100000 0x0 0x2000>;
interrupts = <0x0 0xa5 0x4>;
clocks = <0xa 0x1 0x13a>;
max-frequency = <0xbebc200>;
power-domains = <0x7 0x20>;
resets = <0xa 0x13a>;
status = "okay";
pinctrl-0 = <0x61>;
pinctrl-1 = <0x62>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <0x63>;
vqmmc-supply = <0x64>;
cd-gpios = <0x65 0xc 0x1>;
bus-width = <0x4>;
sd-uhs-sdr50;
sd-uhs-sdr104;
};
sd@ee120000 {
compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi";
reg = <0x0 0xee120000 0x0 0x2000>;
interrupts = <0x0 0xa6 0x4>;
clocks = <0xa 0x1 0x139>;
max-frequency = <0xbebc200>;
power-domains = <0x7 0x20>;
resets = <0xa 0x139>;
status = "disabled";
};
sd@ee140000 {
compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi";
reg = <0x0 0xee140000 0x0 0x2000>;
interrupts = <0x0 0xa7 0x4>;
clocks = <0xa 0x1 0x138>;
max-frequency = <0xbebc200>;
power-domains = <0x7 0x20>;
resets = <0xa 0x138>;
status = "okay";
pinctrl-0 = <0x66>;
pinctrl-1 = <0x67>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <0x68>;
vqmmc-supply = <0x69>;
bus-width = <0x8>;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
non-removable;
};
sd@ee160000 {
compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi";
reg = <0x0 0xee160000 0x0 0x2000>;
interrupts = <0x0 0xa8 0x4>;
clocks = <0xa 0x1 0x137>;
max-frequency = <0xbebc200>;
power-domains = <0x7 0x20>;
resets = <0xa 0x137>;
status = "disabled";
};