1

Following the VSOMEIP tutorial Vsomeip in 10 minutes everything works up to the point of Communication between 2 devices.

Current Setup:

  • Ubuntu 16.04 (two machines - Server & Client)
  • Two Machines connected over ethernet

Files used:

  • server.cpp
  • client.cpp
  • client_config.json
  • server_config.json

Output of Server

[info] Parsed vsomeip configuration in 1ms
[info] Using configuration file: "../clie_prop.json".
[info] Default configuration module loaded.
[info] Initializing vsomeip application "Hello".
[info] SOME/IP client identifier configured. Using 0033 (was: 1313)
[info] Instantiating routing manager [Proxy].
[info] Client [33] is connecting to [0] at /tmp/vsomeip-0
[info] Listening at /tmp/vsomeip-33
[info] Application(Hello, 33) is initialized (11, 100).
[info] Starting vsomeip application "Hello" using 2 threads
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] io thread id from application: 0033 (Hello) is: 7f80f5cd88c0 TID: 1497
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED
[info] io thread id from application: 0033 (Hello) is: 7f80f15e7700 TID: 1501
[info] shutdown thread id from application: 0033 (Hello) is: 7f80f1de8700 TID: 1500
[info] main dispatch thread id from application: 0033 (Hello) is: 7f80f25e9700 TID: 1499
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED
[warning] local_client_endpoint::connect: Couldn't connect to: /tmp/vsomeip-0 (Connection refused / 111)
[info] routing_manager_proxy::on_disconnect: Client 0x33 calling host_->on_state with DEREGISTERED

Output of Client

[info] Parsed vsomeip configuration in 0ms
[info] Using configuration file: "../serv_prop.json".
[info] Default configuration module loaded.
[info] Initializing vsomeip application "World".
[warning] Routing Manager seems to be inactive. Taking over...
[info] SOME/IP client identifier configured. Using 1212 (was: 1212)
[info] Instantiating routing manager [Host].
[info] init_routing_endpoint Routing endpoint at /tmp/vsomeip-0
[info] Client [1212] is connecting to [0] at /tmp/vsomeip-0
[info] Service Discovery enabled. Trying to load module.
[info] Service Discovery module loaded.
[info] Application(World, 1212) is initialized (11, 100).
[info] OFFER(1212): [1234.5678:0.0]
[info] Starting vsomeip application "World" using 2 threads
[info] Watchdog is disabled!
[info] io thread id from application: 1212 (World) is: 7fa68723d8c0 TID: 5370
[info] Network interface "enp0s3" state changed: up
[info] vSomeIP 2.10.21 | (default)
[info] Sent READY to systemd watchdog
[info] io thread id from application: 1212 (World) is: 7fa6828f3700 TID: 5374
[info] shutdown thread id from application: 1212 (World) is: 7fa6838f5700 TID: 5372
[info] main dispatch thread id from application: 1212 (World) is: 7fa6840f6700 TID: 5371
[warning] Releasing client identifier 0003. Its corresponding application went offline while no routing manager was running.
[info] Application/Client 0003 is deregistering.

All the code used is the same as the code used in Request/Response in the vsomeip tutorial. The config files are the same as the config file specified in the communication between 2 devices section with the IP Addresses changed to match my machine addresses.

Any help would be greatly appreciated, thanks.

4

2 回答 2

4

我找到了解决办法!!

如果您导航到vsomeip 或 vsomeip-master目录中的/build/examples文件夹,您将找到可执行文件(response-sample、subscribe-sample 等)。如果您以这样的方式运行它们,即它们在 10 分钟内使用与 vsomeip 中使用的相同配置文件(更改单播地址等),它应该可以完美运行。 这是我使用的配置文件。

{
    "unicast" : "192.168.43.6",
    "logging" :
    {
        "level" : "debug",
        "console" : "true",
        "file" : { "enable" : "false", "path" : "/tmp/vsomeip.log" },
        "dlt" : "false"
    },
    "applications" :
    [
        {
            "name" : "World",
            "id" : "0x1212"
        }
    ],
    "services" :
    [
        {
            "service" : "0x1234",
            "instance" : "0x5678",
            "unreliable" : "30509"
        }
    ],
    "routing" : "World",
    "service-discovery" :
    {
        "enable" : "true",
        "multicast" : "224.224.224.245",
        "port" : "30490",
        "protocol" : "udp",
        "initial_delay_min" : "10",
        "initial_delay_max" : "100",
        "repetitions_base_delay" : "200",
        "repetitions_max" : "3",
        "ttl" : "3",
        "cyclic_offer_delay" : "2000",
        "request_response_delay" : "1500"
    }
}

我使用 shell 脚本来做到这一点。

#!/bin/bash
route add -host 224.224.224.245 dev <interface>
export VSOMEIP_CONFIGURATION=<config_file>
export VSOMEIP_APPLICATION_NAME=<application_name>
./<executable>

反正对我有用!希望这可以帮助!:)

于 2018-11-21T10:06:30.803 回答
0

为了澄清 Rob Crowley 的答案,我使用“10 分钟内的 vsomeip”教程中包含的两个独特的 .json 配置文件让它工作。我在提供服务的主机上使用了“World”配置,在运行客户端的主机上使用了“Hello”配置文件。我唯一需要在这些文件中修改的是“单播”地址。我将其更改为匹配相应主机的 IP 地址。

我还修改了脚本以在“route add -host”命令之前使用“sudo”,因为我发现没有它实际上不会添加路由。

我在“vsomeip/build/examples/”文件夹中调用 make 来构建示例。我在服务服务的脚本上指出的是“notify-sample”可执行文件(vsomeip/build/examples/)。我在服务服务的脚本上指出的是“subscribe-sample”可执行文件(vsomeip/build/examples/)。

在通过以太网连接我的两台主机并确保它们的 IP 地址与各自配置文件的“单播”字段中的 IP 地址匹配之后,这种组合对我有用。

于 2019-07-30T20:41:39.620 回答