我已经在装有 Centos 6.9 32 位操作系统且内核版本为 2.6.32-754.2.1.el6.i686 的计算机的 PCI 插槽上安装了两个 DAQ 卡。第一个是 PCI-6225，第二个是 PCI-6509。我已按照说明的所有步骤更新内核并成功安装DAQmx802f0.iso驱动程序。但是，现在当我尝试执行命令来验证安装时，我只会收到一些错误。更详细地，我将详细说明这个问题，如下所示：
[user@localhost ~]$ nilsdev
libnipalu.so failed to initialize
Perhaps you need to run updateNIDrivers
Aborted
不幸的是，我已经运行了 updateNIDrivers 并且它已经成功执行，但是问题并没有解决。
以下是 NI 例程命令的一些输出：
[user@localhost ~]$ lsmod | grep ni
nikal 55889 0
[user@localhost ~]$ /etc/init.d/nipal start
/etc/init.d/nipal: line 81: /tmp/nipalk-load.log: Permission denied
FATAL: Error inserting nipalk (/lib/modules/2.6.32-754.2.1.el6.i686/kernel/natinst/nipal/nipalk.ko): Kernel does not have module support
error: nipalk failed to load
possible causes:
nipalk was not versioned for this kernel (2.6.32-754.2.1.el6.i686)
modules are not enabled for this kernel (CONFIG_MODULES)
unresolved symbols
possible solution:
if you recently installed a new kernel or have rebooted to
a different kernel from one you were previously running then run
/usr/local/bin/updateNIDrivers
to version your NI drivers for kernel 2.6.32-754.2.1.el6.i686
请帮我解决这个问题。
更新：这是命令的输出dmesg | grep ni
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
initial memory mapped : 0 - 01200000
init_memory_mapping: 0000000000000000-00000000375fe000
Initializing CPU#0
Initializing HighMem for node 0 (000375fe:00400000)
Memory: 15887788k/16777216k available (4687k kernel code, 286536k reserved, 2660 k data, 576k init, 15268960k highmem)
.init : 0xc0b2e000 - 0xc0bbe000 ( 576 kB)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU0: Thermal monitoring enabled (TM1)
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Initializing CPU#7
devtmpfs: initialized
SCSI subsystem initialized
NetLabel: Initializing
pnp: PnP ACPI init
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 16721k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1533446881.347:1): initialized
msgmni has been set to 1244
isapnp: Scanning for PnP cards...
uhci_hcd: USB Universal Host Controller Interface driver
Initializing XFRM netlink socket
Initalizing network drop monitor service
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
[drm] Initialized drm 1.1.0 20060810
[drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed comp anion descriptor
dracut: Scanning devices sda2 for LVM logical volumes VolGroup/lv_swap VolGroup /lv_root
SELinux: Completing initialization.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev drm, type drm), not configured for labeling
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
ACPI Warning: SystemIO range 0x0000f040-0x0000f05f conflicts with OpRegion 0x000 0f040-0x0000f04f (\_SB_.PCI0.SBUS.SMBI) (20090903/utaddress-254)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
SELinux: initialized (dev sda1, type ext4), uses xattr
SELinux: initialized (dev dm-2, type ext4), uses xattr
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
nikal: module license 'Copyright (c) 2002-2011 National Instruments Corporation. All Rights Reserved. Any and all use of the copyrighted materials is subject to the then current terms and conditions of the applicable license agreement, wh ich can be found at <http://www.ni.com/linux/>.' taints kernel.
[nipal] More than 4GB of addressable memory detected.
[nipal] This configuration is not supported. Check the release notes for more i nformation.