-1

我需要为我的本地机器创建别名 Ip,作为我使用的参考https://websiteforstudents.com/switch-static-ip-address-ubuntu-17-04-17-10/

ifconfig 将我的网络接口显示为:

wlp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.106  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::b7c0:76a:d0c0:3a7b  prefixlen 64  scopeid 0x20<link>
        ether 6c:71:d9:21:ff:61  txqueuelen 1000  (Ethernet)
        RX packets 389087  bytes 342937114 (342.9 MB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 270723  bytes 54566302 (54.5 MB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

但是当我sudo nano /etc/network/interfaces按照参考文献中所述运行时,我看到了不同的文件内容:

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

所以我尝试手动添加接口/etc/network/interfaces

# The primary network interface
auto wlp3s0
iface wlp3s0 inet dhcp

iface wlp3s0 inet static
address 10.254.254.254/24

但是当我跑步时它不起作用sudo ifdown wlp3s0 && sudo ifup wlp3s0我得到:

ifdown: interface wlp3s0 not configured
Internet Systems Consortium DHCP Client 4.3.5
Copyright 2004-2016 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/wlp3s0/6c:71:d9:21:ff:61
Sending on   LPF/wlp3s0/6c:71:d9:21:ff:61
Sending on   Socket/fallback
DHCPREQUEST of 192.168.1.106 on wlp3s0 to 255.255.255.255 port 67 (xid=0x4ec976a9)
DHCPACK of 192.168.1.106 from 192.168.1.1
RTNETLINK answers: File exists
bound to 192.168.1.106 -- renewal in 3106 seconds.
RTNETLINK answers: File exists
Failed to bring up wlp3s0.

我是新手,请帮我解决问题,谢谢!

4

1 回答 1

1

别名的格式必须为 - wlp3sX:Y,其中 X 是物理网络接口号,Y 是网络接口号别名。一切都详细描述 - http://drach.pro/blog/linux/item/71-ip-address-alias-on-centos-6-6 http://semenushkin.ru/2010/09/28/ifconfig -别名/

https://askubuntu.com/questions/585468/how-do-i-add-an-additional-ip-address-to-an-interface-in-ubuntu-14

于 2018-01-18T03:45:38.763 回答