1

在我的新 Debian 9 中无法获取静态 IP。

在我的 etc/network/interfaces 我有以下

# This file describes the network interfaces available on your system
# and how to activate them

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
allow-hotplug eth0
iface eth0 inet static
address 192.168.88.10
netmask 255.255.255.0
gateway 192.168.88.1   // this is my router ip
network 192.168.88.0   // this is I don't know why, but I saw it in most of instructions
broadcast 192.168.88.255
dns-nameservers 192.168.88.1

然后我这样做

service networking restart

我得到了错误

Job for networking.service failed because the control process exited with error code.
See "systemctl status networking.service" and "journalctl -xe" for details.
4

3 回答 3

5

我的 Debian 版本 9

uname -a
4.9.0-5-amd64 #1 SMP Debian 4.9.65-3+deb9u2 (2018-01-04) x86_64 GNU/Linux

尝试以下方式，它适用于我。文件名：/etc/network/interfaces

auto eth0
iface eth0 inet static
    hwaddress 3a:c6:b2:43:7b:ab (you MAC address)
    address   192.168.88.10
    netmask   255.255.255.0
    gateway   192.168.88.1

然后重启服务：

systemctl restart networking.service
于 2018-01-23T12:40:13.100 回答
0

I found solution. I installed new instance of Debian and checked settings on fresh system.

The problem was in interface name eth0. Correct name is ens3. 

auto ens3
allow-hotplug ens3
iface ens3 inet static
address 192.168.88.10
netmask 255.255.255.0
network 192.168.88.0
broadcast 192.168.88.255
gateway 192.168.88.1
dns-nameservers 192.168.88.1
于 2018-01-20T16:18:03.187 回答
0

就我而言，我必须手动编写 resolv.conf 文件并删除现有文件。某些原因系统在将其设置为静态 ip 时无法写入 resolv.conf 文件。

之后它的工作原理！

于 2018-07-28T22:08:34.267 回答