ceph - 在销毁 pool1_U (500) 之前将 pool 'mon_allow_pool_delete 配置选项删除为 true

Question

我正在运行 proxmox 并尝试删除我创建错误的池。但是它不断给出这个错误：

mon_command failed - pool deletion is disabled; you must first set the mon_allow_pool_delete config option to true before you can destroy a pool1_U (500)
OK

但：

root@kvm-01:~# ceph -n mon.0 --show-config | grep mon_allow_pool_delete
mon_allow_pool_delete = true
root@kvm-01:~# ceph -n mon.1 --show-config | grep mon_allow_pool_delete
mon_allow_pool_delete = true
root@kvm-01:~# ceph -n mon.2 --show-config | grep mon_allow_pool_delete
mon_allow_pool_delete = true

root@kvm-01:~# cat /etc/ceph/ceph.conf
[global]
         auth client required = cephx
         auth cluster required = cephx
         auth service required = cephx
         cluster network = 10.0.0.0/24
         filestore xattr use omap = true
         fsid = 41fa3ff6-e751-4ebf-8a76-3f4a445823d2
         keyring = /etc/pve/priv/$cluster.$name.keyring
         osd journal size = 5120
         osd pool default min size = 1
         public network = 10.0.0.0/24
[osd]
         keyring = /var/lib/ceph/osd/ceph-$id/keyring
[mon.0]
         host = kvm-01
         mon addr = 10.0.0.1:6789
         mon allow pool delete = true

[mon.2]
         host = kvm-03
         mon addr = 10.0.0.3:6789
         mon allow pool delete = true
[mon.1]
         host = kvm-02
         mon addr = 10.0.0.2:6789
         mon allow pool delete = true

这就是我的完整配置。知道为什么我无法删除我的池吗？

Answer 1

另一种方法：

ceph tell mon.\* injectargs '--mon-allow-pool-delete=true'
ceph osd pool rm test-pool test-pool --yes-i-really-really-mean-it

Answer 2

您可以通过 CLI 或 Ceph 的仪表板在 Cluster -> Configuration（高级设置）下设置配置。

CLI 命令如下：

ceph config set mon mon_allow_pool_delete true

Answer 3

你需要做：

systemctl restart ceph-mon.target

否则，您可以无限次重启服务器，但什么也没有发生

Answer 4

编辑配置后，您需要重新启动节点。重启后一切顺利！

Answer 5

在 /etc/ceph/ceph.conf 或 /etc/ceph/ceph.d/ceph.conf 添加以下行并重新启动 ceph.target 服务后，问题仍然存在。

[mon.1]
host = kvm-02
mon addr = 10.11.110.112:6789
mon allow pool delete = true