0

我正在尝试通过串行连接（USB）从我的 PC（Ubuntu 14.04）向 Arduino Uno 发送数据。Arduino 应显示接收到的数据以进行测试。（我很高兴，如果我收到任何东西......）

我使用 libserial 发送数据，但 Arduino 什么也没收到。在 Arduino IDE 的帮助下，我可以成功地将数据发送到 Arduino。使用普通控制台命令也可以发送数据。

这是我的 Arduino 代码：

#include <LiquidCrystal.h>
#include <SoftwareSerial.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

String inputString = "";         // a string to hold incoming data
boolean stringComplete = false;  // whether the string is complete

void setup() {
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("connecting...");

  inputString.reserve(200);

  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  lcd.setCursor(0, 0);
  lcd.print("successful connected");

}

void loop() {
  lcd.setCursor(0, 1);

  // print the string when a newline arrives:

    lcd.setCursor(0, 1);
    lcd.print("                ");

    lcd.setCursor(0, 1);
    lcd.print(inputString);

    delay(500);
}

void serialEvent() {

  if (Serial.available()) {
    // get the new byte:
    char inChar = (char)Serial.read();
    // add it to the inputString:
    inputString += inChar;
  }
}

这是 c++ 代码（在 PC 端）：

//Libserial: sudo apt-get install libserial-dev
#include <SerialStream.h>
#include <iostream>
#include <unistd.h>

using namespace LibSerial;
using namespace std;

int main(int argc, char** argv)
{
    SerialStream my_serial_stream;
    //
    // Open the serial port for communication.
    //
    my_serial_stream.Open("/dev/ttyACM0");

    my_serial_stream.SetBaudRate(SerialStreamBuf::BAUD_9600);

    //my_serial_stream.SetVTime(1);
    //my_serial_stream.SetVMin(0);

    my_serial_stream.SetCharSize(SerialStreamBuf::CHAR_SIZE_8);
    my_serial_stream.SetParity(SerialStreamBuf::PARITY_NONE);
    my_serial_stream.SetFlowControl(SerialStreamBuf::FLOW_CONTROL_NONE);
    my_serial_stream.SetNumOfStopBits(1);

    int i = 0;

    while(i<=5) {

        usleep(1500000);

        if (!my_serial_stream.good()) {

            my_serial_stream << i << "\n" << endl;
            cout << i << endl; 


        }
        else {

            cout << "serial is not good" << endl; 
        }

        i++;
    }

    my_serial_stream.Close();

    cout << "ready" << endl; 


    return 0;
}

你有什么想法为什么这不起作用？

谢谢！

4

1 回答 1

1

我找到了一个解决方案，如何通过串行端口（USB）与 Arduino 通信。我不使用 libserial。

我改进了 Arduino 代码（仅显示，如果有新行）：

// include the library code:
#include <LiquidCrystal.h>
#include <SoftwareSerial.h>

// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);

String inputString = "";         // a string to hold incoming data
boolean stringComplete = false;  // whether the string is complete

void setup() {
  // set up the LCD's number of columns and rows:
  lcd.begin(16, 2);
  // Print a message to the LCD.
  lcd.print("connecting...");

  inputString.reserve(200);

  Serial.begin(9600);
  while (!Serial) {
    ; // wait for serial port to connect. Needed for native USB port only
  }

  lcd.setCursor(0, 0);
  lcd.print("successful connected");

}

void loop() {
  lcd.setCursor(0, 1);

  if (stringComplete) {
  // print the string when a newline arrives:

    lcd.setCursor(0, 1);
    lcd.print("                ");

    lcd.setCursor(0, 1);
    lcd.print(inputString);

    inputString = "";
    stringComplete = false;

  }
}

void serialEvent() {

  if (Serial.available()) {
    while (Serial.available()) {
    // get the new byte:
    char inChar = (char)Serial.read();
    // add it to the inputString:
    inputString += inChar;
    // if the incoming character is a newline, set a flag
    // so the main loop can do something about it:
    if (inChar == '\n') {
      stringComplete = true;
    }
  }
  }
}

C++ 代码：

//to compile use: g++ serial_success.cpp -o serial -std=c++11

//you might not need every inclusion
#include <iostream>
#include <unistd.h>
#include <string>

#include <stdio.h> // standard input / output functions
#include <string.h> // string function definitions
#include <unistd.h> // UNIX standard function definitions
#include <fcntl.h> // File control definitions
#include <errno.h> // Error number definitions
#include <termios.h> // POSIX terminal control definitionss
#include <time.h>   // time calls

using namespace std;

#define BAUDRATE B9600


int main(int argc, char** argv)
{  

    int fileDescriptor = open("/dev/ttyACM0", O_RDWR | O_NOCTTY);

    struct termios newtio;
    bzero(&newtio, sizeof(newtio));
    newtio.c_cflag = BAUDRATE | CRTSCTS | CS8 | CLOCAL | CREAD;

    // set to 8N1
    newtio.c_cflag &= ~PARENB;
    newtio.c_cflag &= ~CSTOPB;
    newtio.c_cflag &= ~CSIZE;
    newtio.c_cflag |= CS8;

    newtio.c_iflag = IGNPAR;

    // output mode to
    //newtio.c_oflag = 0;
    newtio.c_oflag |= OPOST;

    /* set input mode (non-canonical, no echo,...) */
    newtio.c_lflag = 0;

    newtio.c_cc[VTIME] = 10; /* inter-character timer 1 sec */
    newtio.c_cc[VMIN] = 0; /* blocking read disabled  */

    tcflush(fileDescriptor, TCIFLUSH);
    if (tcsetattr(fileDescriptor, TCSANOW, &newtio)) {
        perror("could not set the serial settings!");
        return -99;
    }

    int i = 0;
    string test = ">123,456,7890;";

    while(i < 10) {

        usleep(100000);

        string res = test + std::to_string(i) + "\n";
        long wrote = write(fileDescriptor, res.c_str(), sizeof(char)*res.size() );

        cout << res << endl;


        i++;
    }


    cout << "ready" << endl;

    return 0;
}
于 2016-07-25T17:08:48.780 回答