1

dmesg我从使用 yocto 创建的内核中得到以下输出。

bus: 'i2c': add driver edt_ft5x06
bus: 'i2c': driver_probe_device: matched device 1-0038 with driver edt_ft5x06
bus: 'i2c': really_probe: probing driver edt_ft5x06 with device 1-0038
edt_ft5x06 1-0038: no default pinctrl state
edt_ft5x06 1-0038: probe
edt_ft5x06 1-0038: no platform data?
edt_ft5x06: probe of 1-0038 failed with error -22
i2c-core: driver [edt_ft5x06] registered

我的设备树包含：

smarc_i2c_cam: i2c-gpio-1 {
    compatible = "i2c-gpio";
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_smx6_i2c_gpio_1>;
    gpios =
        <&gpio4 10 0>, /* sda */
        <&gpio1 6 0>;  /* scl */
    #address-cells = <1>;
    #size-cells = <0>;
    i2c-gpio,delay-us = <2>;
};

polytouch: edt-ft5x06@38 {
    compatible = "edt,edt-ft5x06";
    reg = <0x38>;
    pinctrl-names = "default";
    //pinctrl-1 = <&edt_ft5x06_pins>;
    interrupt-parent = <&gpio3>;
    interrupts = <1 8>;
};

我的主板是 smarc-samx6i（imx6q“飞思卡尔”处理器）。
Linux 内核是 3.10.17。

但是触摸没有反应；甚至 i2c 也没有响应。我还有什么需要照顾的吗？

4

2 回答 2

1

3.10.17 内核中的 edt ft5x06 驱动程序未启用设备树。您必须从更新的内核（如 4.1 或更高版本）向后移植驱动程序，然后您将能够将设备树与驱动程序一起使用。

于 2016-07-12T04:17:30.403 回答
1

我在运行在主线 linux 内核 4.6 上的 Lenmaker BananaPro (A20) 上有一个带有“EDT-FT5x06”触摸控制器的 lenmaker 7 英寸触摸屏。

这是我的设备树的补丁。看wake-gpios和interrupts。

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 18fcc87..50f1a36 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -147,6 +147,26 @@
status = "okay";
 };

+&i2c3 {
+   status = "okay";
+   pinctrl-names = "default";
+   pinctrl-0 = <&i2c3_pins_a>;
+   edt: edt-ft5x06@38 {
+           compatible = "edt,edt-ft5x06";
+           reg = <0x38>;
+           interrupt-parent = <&pio>;
+           interrupts = <7 9 IRQ_TYPE_EDGE_FALLING>;
+           wake-gpios = <7 7 GPIO_ACTIVE_LOW>;
+           pinctrl-names = "default";
+           pinctrl-0 = <&edt_ft5x06_pins>;
+           touchscreen-size-x = <1024>;
+           touchscreen-size-y = <600>;
+           touchscreen-inverted-x;
+           touchscreen-swapped-x-y;
+   };
+};
+
+
&ir0 {
  pinctrl-names = "default";
  pinctrl-0 = <&ir0_rx_pins_a>;
@@ -222,6 +242,14 @@
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
  allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
  };
+
+   edt_ft5x06_pins: edt_ft5x06_pins@0 {
+       allwinner,pins = "PH7", "PH9";
+       allwinner,function = "gpio_out";
+       allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+       allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+   };
+
};

 &reg_usb1_vbus {

也许您在 linux 内核模块的文档中找到了更多信息：https ://www.kernel.org/doc/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt

或在这里： http: //linux-sunxi.org/Touchscreen

于 2016-06-09T09:08:44.623 回答