当我在 kapacitor.conf 的 influxdb 设置内的 url 设置中尝试 localhost 时，我能够正确获取警报。
但是，当我尝试将 url 指向 infludb configuratin 部分中的某个远程位置时，我无法获得任何警报等。
有人可以帮我吗？
请在 kapacitor.conf 文件下方找到：
# The hostname of this node.
# Must be resolvable by any configured InfluxDB hosts.
hostname = "localhost"
# Directory for storing a small amount of metadata about the server.
data_dir = "/var/lib/kapacitor"
[http]
# HTTP API Server for Kapacitor
# This server is always on,
# it servers both as a write endpoint
# and as the API endpoint for all other
# Kapacitor calls.
bind-address = ":9092"
auth-enabled = false
log-enabled = true
write-tracing = false
pprof-enabled = false
https-enabled = false
https-certificate = "/etc/ssl/kapacitor.pem"
[logging]
# Destination for logs
# Can be a path to a file or 'STDOUT', 'STDERR'.
file = "/var/log/kapacitor/kapacitor.log"
# Logging level can be one of:
# DEBUG, INFO, WARN, ERROR, or OFF
level = "INFO"
[replay]
# Where to store replay files, aka recordings.
dir = "/var/lib/kapacitor/replay"
[task]
# Where to store the tasks database
dir = "/var/lib/kapacitor/tasks"
# How often to snapshot running task state.
snapshot-interval = "60s"
[deadman]
# Configure a deadman's switch
# Globally configure deadman's switches on all stream tasks.
# NOTE: for this to be of use you must also globally configure at least one alerting method.
global = false
# Threshold, if globally configured the alert will be triggered if the throughput in points/interval is <= threshold.
threshold = 0.0
# Interval, if globally configured the frequency at which to check the throughput.
interval = "10s"
# Id -- the alert Id, NODE_NAME will be replaced with the name of the node being monitored.
id = "node 'NODE_NAME' in task '{{ .TaskName }}'"
# The message of the alert. INTERVAL will be replaced by the interval.
message = "{{ .ID }} is {{ if eq .Level \"OK\" }}alive{{ else }}dead{{ end }}: {{ index .Fields \"collected\" | printf \"%0.3f\" }} points/INTERVAL."
# Multiple InfluxDB configurations can be defined.
# Exactly one must be marked as the default.
# Each one will be given a name and can be referenced in batch queries and InfluxDBOut nodes.
[[influxdb]]
# Connect to an InfluxDB cluster
# Kapacitor can subscribe, query and write to this cluster.
# Using InfluxDB is not required and can be disabled.
enabled = true
default = true
name = "localhost"
urls = ["http://remote_ip:8086"]
#urls = ["http://localhost:8086"]
username = ""
password = ""
timeout = 0
# Absolute path to pem encoded CA file.
# A CA can be provided without a key/cert pair
# ssl-ca = "/etc/kapacitor/ca.pem"
# Absolutes paths to pem encoded key and cert files.
# ssl-cert = "/etc/kapacitor/cert.pem"
# ssl-key = "/etc/kapacitor/key.pem"
# Do not verify the TLS/SSL certificate.
# This is insecure.
insecure-skip-verify = false
# Subscriptions use the UDP network protocl.
# The following options of for the created UDP listeners for each subscription.
# Number of packets to buffer when reading packets off the socket.
udp-buffer = 1000
# The size in bytes of the OS read buffer for the UDP socket.
# A value of 0 indicates use the OS default.
udp-read-buffer = 0
[influxdb.subscriptions]
# Set of databases and retention policies to subscribe to.
# If empty will subscribe to all, minus the list in
# influxdb.excluded-subscriptions
#
# Format
# db_name = <list of retention policies>
#
# Example:
# my_database = [ "default", "longterm" ]
[influxdb.excluded-subscriptions]
# Set of databases and retention policies to exclude from the subscriptions.
# If influxdb.subscriptions is empty it will subscribe to all
# except databases listed here.
#
# Format
# db_name = <list of retention policies>
#
# Example:
# my_database = [ "default", "longterm" ]
[smtp]
# Configure an SMTP email server
# Will use TLS and authentication if possible
# Only necessary for sending emails from alerts.
enabled = false
host = "localhost"
port = 25
username = ""
password = ""
# From address for outgoing mail
from = ""
# List of default To addresses.
# to = ["oncall@example.com"]
# Skip TLS certificate verify when connecting to SMTP server
no-verify = false
# Close idle connections after timeout
idle-timeout = "30s"
# If true the all alerts will be sent via Email
# without explicity marking them in the TICKscript.
global = false
# Only applies if global is true.
# Sets all alerts in state-changes-only mode,
# meaning alerts will only be sent if the alert state changes.
state-changes-only = false
[opsgenie]
# Configure OpsGenie with your API key and default routing key.
enabled = false
# Your OpsGenie API Key.
api-key = ""
# Default OpsGenie teams, can be overridden per alert.
# teams = ["team1", "team2"]
# Default OpsGenie recipients, can be overridden per alert.
# recipients = ["recipient1", "recipient2"]
# The OpsGenie API URL should not need to be changed.
url = "https://api.opsgenie.com/v1/json/alert"
# The OpsGenie Recovery URL, you can change this
# based on which behavior you want a recovery to
# trigger (Add Notes, Close Alert, etc.)
recovery_url = "https://api.opsgenie.com/v1/json/alert/note"
# If true then all alerts will be sent to OpsGenie
# without explicity marking them in the TICKscript.
# The team and recipients can still be overridden.
global = false
[victorops]
# Configure VictorOps with your API key and default routing key.
enabled = false
# Your VictorOps API Key.
api-key = ""
# Default VictorOps routing key, can be overridden per alert.
routing-key = ""
# The VictorOps API URL should not need to be changed.
url = "https://alert.victorops.com/integrations/generic/20131114/alert"
# If true the all alerts will be sent to VictorOps
# without explicity marking them in the TICKscript.
# The routing key can still be overridden.
global = false
[pagerduty]
# Configure PagerDuty.
enabled = false
# Your PagerDuty Service Key.
service-key = ""
# The PagerDuty API URL should not need to be changed.
url = "https://events.pagerduty.com/generic/2010-04-15/create_event.json"
# If true the all alerts will be sent to PagerDuty
# without explicity marking them in the TICKscript.
global = false
[slack]
# Configure Slack.
enabled = false
# The Slack webhook URL, can be obtained by addding
# an Incoming Webhook integration.
# Visit https://slack.com/services/new/incoming-webhook
# to add new webhook for Kapacitor.
#url = "test_hook"
# Default channel for messages
channel = "test-alerts"
# If true the all alerts will be sent to Slack
# without explicity marking them in the TICKscript.
global = false
# Only applies if global is true.
# Sets all alerts in state-changes-only mode,
# meaning alerts will only be sent if the alert state changes.
state-changes-only = false
[hipchat]
# Configure HipChat.
enabled = false
# The HipChat API URL. Replace subdomain with your
# HipChat subdomain.
url = "https://subdomain.hipchat.com/v2/room"
# Visit https://www.hipchat.com/docs/apiv2
# for information on obtaining your room id and
# authentication token.
# Default room for messages
room = ""
# Default authentication token
token = ""
# If true then all alerts will be sent to HipChat
# without explicitly marking them in the TICKscript.
global = false
# Only applies if global is true.
# Sets all alerts in state-changes-only mode,
# meaning alerts will only be sent if the alert state changes.
state-changes-only = false
[alerta]
# Configure Alerta.
enabled = false
# The Alerta URL.
url = ""
# Default authentication token.
token = ""
# Default environment.
environment = ""
# Default origin.
origin = "kapacitor"
[sensu]
# Configure Sensu.
enabled = false
# The Sensu Client host:port address.
addr = "sensu-client:3030"
# Default JIT source.
source = "Kapacitor"
[reporting]
# Send anonymous usage statistics
# every 12 hours to Enterprise.
enabled = true
url = "https://usage.influxdata.com"
[stats]
# Emit internal statistics about Kapacitor.
# To consume these stats create a stream task
# that selects data from the configured database
# and retention policy.
#
# Example:
# stream.from().database('_kapacitor').retentionPolicy('default')...
#
enabled = true
stats-interval = "10s"
database = "_kapacitor"
retention-policy= "default"
[udf]
# Configuration for UDFs (User Defined Functions)
[udf.functions]
# Example go UDF.
# First compile example:
# go build -o avg_udf ./udf/agent/examples/moving_avg.go
#
# Use in TICKscript like:
# stream.goavg()
# .field('value')
# .size(10)
# .as('m_average')
#
# uncomment to enable
#[udf.functions.goavg]
# prog = "./avg_udf"
# args = []
# timeout = "10s"
# Example python UDF.
# Use in TICKscript like:
# stream.pyavg()
# .field('value')
# .size(10)
# .as('m_average')
#
# uncomment to enable
#[udf.functions.pyavg]
# prog = "/usr/bin/python2"
# args = ["-u", "./udf/agent/examples/moving_avg.py"]
# timeout = "10s"
# [udf.functions.pyavg.env]
# PYTHONPATH = "./udf/agent/py"
[talk]
# Configure Talk.
enabled = false
# The Talk webhook URL.
url = "https://jianliao.com/v2/services/webhook/uuid"
# The default authorName.
author_name = "Kapacitor"
##################################
# Input Methods, same as InfluxDB
#
[collectd]
enabled = false
bind-address = ":25826"
database = "collectd"
retention-policy = ""
batch-size = 1000
batch-pending = 5
batch-timeout = "10s"
typesdb = "/usr/share/collectd/types.db"
[opentsdb]
enabled = false
bind-address = ":4242"
database = "opentsdb"
retention-policy = ""
consistency-level = "one"
tls-enabled = false
certificate = "/etc/ssl/influxdb.pem"
batch-size = 1000
batch-pending = 5
batch-timeout = "1s"