1

我在 linux 上使用 ctags 和 vim。

一旦我在任何标签上按下回车键，焦点就会转到源代码窗口，为了重新获得对 taglist 窗口的关注，我必须做:TlistToggle两次（使用变量'Tlist_GainFocus_On_ToggleOpen' set to1） - 这基本上关闭了 taglist 窗口并再次打开它获得的焦点。

我只是好奇我们是否可以在不关闭 taglist 窗口的情况下在 taglist 窗口和源窗口之间切换焦点？

4

2 回答 2

3 
:help window

...给出了关于 Vim 窗口的章节，其中

:help window-move-cursor

...成为您正在寻找的子章节：

4. Moving cursor to other windows           *window-move-cursor*

CTRL-W <Down>                   *CTRL-W_<Down>*
CTRL-W CTRL-J                   *CTRL-W_CTRL-J* *CTRL-W_j*
CTRL-W j    Move cursor to Nth window below current one.  Uses the cursor
        position to select between alternatives.

CTRL-W <Up>                 *CTRL-W_<Up>*
CTRL-W CTRL-K                   *CTRL-W_CTRL-K* *CTRL-W_k*
CTRL-W k    Move cursor to Nth window above current one.  Uses the cursor
        position to select between alternatives.

CTRL-W <Left>                   *CTRL-W_<Left>*
CTRL-W CTRL-H                   *CTRL-W_CTRL-H*
CTRL-W <BS>                 *CTRL-W_<BS>* *CTRL-W_h*
CTRL-W h    Move cursor to Nth window left of current one.  Uses the
        cursor position to select between alternatives.

CTRL-W <Right>                  *CTRL-W_<Right>*
CTRL-W CTRL-L                   *CTRL-W_CTRL-L* *CTRL-W_l*
CTRL-W l    Move cursor to Nth window right of current one.  Uses the
        cursor position to select between alternatives.

CTRL-W w                    *CTRL-W_w* *CTRL-W_CTRL-W*
CTRL-W CTRL-W   Without count: move cursor to window below/right of the
        current one.  If there is no window below or right, go to
        top-left window.
        With count: go to Nth window (windows are numbered from
        top-left to bottom-right).  To obtain the window number see
        |bufwinnr()| and |winnr()|.  When N is larger than the number
        of windows go to the last window.

                        *CTRL-W_W*
CTRL-W W    Without count: move cursor to window above/left of current
        one.  If there is no window above or left, go to bottom-right
        window.  With count: go to Nth window, like with CTRL-W w.

CTRL-W t                    *CTRL-W_t* *CTRL-W_CTRL-T*
CTRL-W CTRL-T   Move cursor to top-left window.

CTRL-W b                    *CTRL-W_b* *CTRL-W_CTRL-B*
CTRL-W CTRL-B   Move cursor to bottom-right window.

CTRL-W p                    *CTRL-W_p* *CTRL-W_CTRL-P*
CTRL-W CTRL-P   Go to previous (last accessed) window.

                        *CTRL-W_P* *E441*
CTRL-W P    Go to preview window.  When there is no preview window this is
        an error.
        {not available when compiled without the |+quickfix| feature}

If Visual mode is active and the new window is not for the same buffer, the
Visual mode is ended.  If the window is on the same buffer, the cursor
position is set to keep the same Visual area selected.

                        *:winc* *:wincmd*
These commands can also be executed with ":wincmd":

:[count]winc[md] {arg}
        Like executing CTRL-W [count] {arg}.  Example: >
            :wincmd j
<       Moves to the window below the current one.
        This command is useful when a Normal mode cannot be used (for
        the |CursorHold| autocommand event).  Or when a Normal mode
        command is inconvenient.
        The count can also be a window number.  Example: >
            :exe nr . "wincmd w"
<       This goes to window "nr".

话虽如此，通过启用鼠标支持set mouse=a（

于 2016-01-19T11:39:30.230 回答
1

不就是目的TlistOpen吗？

否则，如果 taglist 窗口有一个可以识别的名称，您可以使用 提取窗口编号let b = bufwinnr(the_buffer_name_or_id)并使用 跳转到它exe b.'wincmd w'。您可能需要使用类似的东西搜索正确的缓冲区let buf_id = filter(range(1,bufnr('$')), 'v:val =~ "THEPATTERN"'))

于 2016-01-19T12:25:38.147 回答