在我的应用程序中，我使用包含 UICollisionBehavior 的 UIKit Dynamics 在打开和关闭时让菜单弹跳。我用于此的代码如下。这在 iOS8 上运行良好。但是，对于 iOS9（包括刚刚发布的 iOS9.1 beta 2），我发现了一个奇怪的问题。从表面上看，我用这个弹跳动画弹跳的菜单在打开然后关闭后并没有完全关闭。仔细观察，我发现 UICollisionBehavior 的边界在 iOS8 和 iOS9 中使用相同的值计算。
菜单打开碰撞边界：(798,330) to (1024,330)
它表示屏幕上的一条线，菜单底部在打开和弹跳后最终应该停留的位置。
菜单关闭碰撞边界：(798,-280) to (1024,-280)
代表屏幕外的一条线，菜单顶部在关闭和弹跳后最终应该停留在哪里。
问题出现在 iOS9 中，菜单 UIView 实际上并没有最终停留在这些边界上。打开后，iOS9的菜单框是这样的：
(798, -1.5; 226, 330)[这是：（x，y；w，h）]
关闭后，菜单框架如下所示：
(798, -278.5; 226, 330)
但是，这实际上应该是：
(798, 0; 226, 330)（打开后）
(798, -280; 226, 330)（关闭后）
还有其他人看到 iOS9 和碰撞行为的这些问题吗？
我即将在我的代码中添加一个 hack（在下面搜索“HACK”），我将在 iOS9 中选择它，但我真的不喜欢这些 hack！
弹跳动画.h
//
// BounceAnimation.h
// Petunia
//
// Created by Christopher Prince on 12/18/14.
// Copyright (c) 2014 Spastic Muffin, LLC. All rights reserved.
//
// Animates an object through a straight line path, up, down, left or right until it lands, after which it bounces. This requires iOS8 or later.
#import <Foundation/Foundation.h>
@interface BounceAnimation : NSObject
// distnace is for the viewToAnimate to travel until it lands and bounces, in points. You must set this before calling run.
- (instancetype) initWithReferenceView: (UIView *) referenceView viewToAnimate: (UIView *) viewToAnimate andDistance: (CGFloat) distance;
// Direction and distance will be obtained from animateToPoint, and should be consistent with the constraints for the direction property below. I.e., the animateToPoint should be down, left, right, or up from the origin of the viewToAnimate.
- (instancetype) initWithReferenceView: (UIView *) referenceView viewToAnimate: (UIView *) viewToAnimate andFinalPoint: (CGPoint) animateToPoint;
// One shot animation. You can only call run once.
- (void) run;
// Called when animation completes, if given. Called when all the bouncing is done.
@property (nonatomic, strong) void (^completion)(void);
// Called when first contact is made with the boundary, just as the first bounce is about to begin.
@property (nonatomic, strong) void (^firstImpactCallback)(void);
// Only keeps weak references to the views passed in the init method.
@property (nonatomic, weak, readonly) UIView *referenceView;
@property (nonatomic, weak, readonly) UIView *viewToAnimate;
// Rate at which the object accelerates towards the boundary. Same units as magnitude for UIGravityBehavior. Defaults to 1.0.
@property (nonatomic) CGFloat accelerationRate;
// Defaults to 0. Units are points per second.
@property (nonatomic) CGFloat initialVelocity;
// This is a unit vector.
// dx (first component) is rightwards; e.g., dx=0, no right/left; dx=-1, is left one unit
// dy (second component) is downwards; e.g., dy=1, down one unit.
// Defaults to (0, 1), downwards.
// Right now, dx and dy can be 0, 1, or -1. One of dx and dy must be 0.
@property (nonatomic, readonly) CGVector direction;
@end
弹跳动画.m
//
// BounceAnimation.m
// Petunia
//
// Created by Christopher Prince on 12/18/14.
// Copyright (c) 2014 Spastic Muffin, LLC. All rights reserved.
//
#import "BounceAnimation.h"
#import "Vector.h"
#import "UIDevice+Extras.h"
@interface BounceAnimation()<UIDynamicAnimatorDelegate, UICollisionBehaviorDelegate>
{
UIDynamicAnimator *_animator;
UIGravityBehavior *_gravityBehavior;
UICollisionBehavior *_collision;
UIDynamicItemBehavior *_velocity;
CGPoint _linearVelocity;
CGFloat _distanceInPoints;
BOOL _calledFirstImpactCallback;
}
@property (nonatomic, weak) UIView *referenceView;
@property (nonatomic, weak) UIView *viewToAnimate;
@property (nonatomic) CGVector direction;
@end
#define INITIAL_GRAVITY_MAGNITUDE 1.0
@implementation BounceAnimation
- (void) setupWithReferenceView: (UIView *) referenceView andViewToAnimate: (UIView *) viewToAnimate;
{
AssertIf([UIDevice ios7OrEarlier], @"Don't have at least iOS8!");
self.referenceView = referenceView;
self.viewToAnimate = viewToAnimate;
_animator = [[UIDynamicAnimator alloc] initWithReferenceView:referenceView];
_animator.delegate = self;
_gravityBehavior = [[UIGravityBehavior alloc] initWithItems:@[viewToAnimate]];
_gravityBehavior.magnitude = INITIAL_GRAVITY_MAGNITUDE;
_velocity = [[UIDynamicItemBehavior alloc] initWithItems:@[viewToAnimate]];
}
// referenceView is just the view on top of which we're doing our animation. E.g., it could be self.view of a view controller. viewToAnimate must be a subview of the reference view.
- (instancetype) initWithReferenceView: (UIView *) referenceView viewToAnimate: (UIView *) viewToAnimate andDistance: (CGFloat) distanceInPoints;
{
self = [super init];
if (self) {
AssertIf(distanceInPoints <= 0.0, @"Invalid distance: %f", _distanceInPoints);
_distanceInPoints = distanceInPoints;
[self setupWithReferenceView:referenceView andViewToAnimate:viewToAnimate];
[self setDirection:CGVectorMake(0.0, 1.0)];
}
return self;
}
- (instancetype) initWithReferenceView: (UIView *) referenceView viewToAnimate: (UIView *) viewToAnimate andFinalPoint: (CGPoint) animateToPoint;
{
self = [super init];
if (self) {
// Need to compute distance and direction.
CGVector direction = [Vector subFirst:[Vector fromPoint:animateToPoint] from:[Vector fromPoint:viewToAnimate.frameOrigin]];
SPASLogDetail(@"direction after subtraction: %@", NSStringFromCGVector(direction));
// Special case: No direction because same start and finish.
if (direction.dy + direction.dx == 0.0) {
_distanceInPoints = 0.0;
}
else {
direction = [Vector normalize:direction]; // vectorNormalize(direction);
_distanceInPoints = [Vector distanceFromPoint:viewToAnimate.frameOrigin toPoint:animateToPoint];
}
SPASLogDetail(@"finalPoint: %@, direction: %@, distance: %f", NSStringFromCGPoint(animateToPoint), NSStringFromCGVector(direction), _distanceInPoints);
[self setupWithReferenceView:referenceView andViewToAnimate:viewToAnimate];
[self setDirection:direction];
}
return self;
}
- (void) setInitialVelocity:(CGFloat)initialVelocity;
{
_initialVelocity = initialVelocity;
// Only positive speeds in the velocity are relevant. Negative speeds reduce the velocity, they don't go the other direction.
_linearVelocity =
CGPointMake(initialVelocity * fabs(_direction.dx),
initialVelocity * fabs(_direction.dy));
}
- (void) setAccelerationRate:(CGFloat)accelerationRate;
{
_accelerationRate = accelerationRate;
_gravityBehavior.magnitude = accelerationRate;
}
// I'm only doing left, right, up, down animations because of the problem of rotating the viewToAnimate. I'm not sure I'll ever have a case where I want a rotated animated view. (Hmmm. If I want to do some kind of continuous animation, arbitrary direction with non-rotated objects could be cool!)
- (void) setDirection:(CGVector)direction;
{
if (_collision) {
[_animator removeBehavior:_collision];
_collision = nil;
}
if (_distanceInPoints == 0.0) {
// Why bother?
SPASLogDetail(@"Zero distance");
return;
}
// 9/24/15; HACK
//_distanceInPoints += 1.5;
// Since we're doing vector operations with one of the init methods above, the following seems risky!
//AssertIf(direction.dy != 0.0 && direction.dy != -1.0 && direction.dy != 1.0, @"Invalid dy: %f", direction.dy);
//AssertIf(direction.dx != 0.0 && direction.dx != -1.0 && direction.dx != 1.0, @"Invalid dx: %f", direction.dx);
_direction = direction;
_gravityBehavior.gravityDirection = direction;
_collision = [[UICollisionBehavior alloc] initWithItems:@[self.viewToAnimate]];
_collision.collisionDelegate = self;
CGPoint startBoundary;
CGPoint endBoundary;
#define SMALL_VALUE 0.05
BOOL (^closeToZero)(CGFloat) = ^(CGFloat value) {
if (value > -SMALL_VALUE && value < SMALL_VALUE) {
return YES;
}
else {
return NO;
}
};
if (closeToZero(direction.dx)) {
// Vertical motion.
CGFloat yBoundary = direction.dy * _distanceInPoints + self.viewToAnimate.frameY;
if (direction.dy > 0.0) {
// If we're going down, then we need to add the height of the self.viewToAnimate to our boundary. This is because the origin coords are in the *upper*, left of the viewToAnimate.
yBoundary += self.viewToAnimate.frameHeight;
}
startBoundary = CGPointMake(self.viewToAnimate.frameX, yBoundary);
endBoundary = CGPointMake(self.viewToAnimate.frameX + self.viewToAnimate.frameWidth, yBoundary);
}
else {
// Horizontal motion.
CGFloat xBoundary = direction.dx * _distanceInPoints + self.viewToAnimate.frameX;
if (direction.dx > 0.0) {
// If we're going to the right, then we need to add the width of the self.viewToAnimate to our boundary. This is because the origin coords are in the upper, *left* of the viewToAnimate.
xBoundary += self.viewToAnimate.frameWidth;
}
startBoundary = CGPointMake(xBoundary, self.viewToAnimate.frameY);
endBoundary = CGPointMake(xBoundary, self.viewToAnimate.frameY + self.viewToAnimate.frameHeight);
}
SPASLog(@"startBoundary: %@, endBoundary: %@", NSStringFromCGPoint(startBoundary), NSStringFromCGPoint(endBoundary));
[_collision addBoundaryWithIdentifier:@"barrier"
fromPoint:startBoundary
toPoint:endBoundary];
[_animator addBehavior:_collision];
}
- (void) run;
{
if (_collision) {
[_animator addBehavior:_gravityBehavior];
[_velocity addLinearVelocity:_linearVelocity forItem:self.viewToAnimate];
[_animator addBehavior:_velocity];
}
else {
if (self.completion) {
self.completion();
}
}
}
#pragma mark - UIDynamicAnimatorDelegate methods
- (void)dynamicAnimatorDidPause:(UIDynamicAnimator*)animator;
{
if (self.completion) {
self.completion();
}
}
#pragma mark -
#pragma mark - UICollisionBehaviorDelegate methods
// This isn't the method that gets called in our case.
//- (void)collisionBehavior:(UICollisionBehavior*)behavior beganContactForItem:(id <UIDynamicItem>)item1 withItem:(id <UIDynamicItem>)item2 atPoint:(CGPoint)p;
- (void)collisionBehavior:(UICollisionBehavior*)behavior beganContactForItem:(id <UIDynamicItem>)item withBoundaryIdentifier:(id <NSCopying>)identifier atPoint:(CGPoint)p;
{
if (!_calledFirstImpactCallback) {
_calledFirstImpactCallback = YES;
if (self.firstImpactCallback) {
self.firstImpactCallback();
}
}
}
#pragma mark -
@end