我有一台通过 SX Virtual Link 连接到网络的柯达 i2600 扫描仪，该网络中的每台 pc 上都模拟到扫描仪的 USB 连接。我可以像这样轻松找到模拟的usbs pid和vid：
或这个：
我尝试使用 LibUsbDotNet 检测信号，但在他们的示例中它不起作用。我试过这个例子：
public static UsbDevice MyUsbDevice;
#region SET YOUR USB Vendor and Product ID!
public static UsbDeviceFinder MyUsbFinder = new UsbDeviceFinder(int.Parse("040a", System.Globalization.NumberStyles.HexNumber), int.Parse("601d", System.Globalization.NumberStyles.HexNumber));
#endregion
public static void Main(string[] args)
{
ErrorCode ec = ErrorCode.None;
try
{
// Find and open the usb device.
MyUsbDevice = UsbDevice.OpenUsbDevice(MyUsbFinder);
// If the device is open and ready
if (MyUsbDevice == null) throw new Exception("Device Not Found.");
// If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
// it exposes an IUsbDevice interface. If not (WinUSB) the
// 'wholeUsbDevice' variable will be null indicating this is
// an interface of a device; it does not require or support
// configuration and interface selection.
IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
if (!ReferenceEquals(wholeUsbDevice, null))
{
// This is a "whole" USB device. Before it can be used,
// the desired configuration and interface must be selected.
// Select config #1
wholeUsbDevice.SetConfiguration(1);
// Claim interface #0.
wholeUsbDevice.ClaimInterface(0);
}
// open read endpoint 1.
UsbEndpointReader reader = MyUsbDevice.OpenEndpointReader(ReadEndpointID.Ep01);
byte[] readBuffer = new byte[1024];
while (ec == ErrorCode.None)
{
int bytesRead;
// If the device hasn't sent data in the last 5 seconds,
// a timeout error (ec = IoTimedOut) will occur.
ec = reader.Read(readBuffer, 5000, out bytesRead);
if (bytesRead == 0) throw new Exception(string.Format("{0}:No more bytes!", ec));
Console.WriteLine("{0} bytes read", bytesRead);
// Write that output to the console.
Console.Write(Encoding.Default.GetString(readBuffer, 0, bytesRead));
}
Console.WriteLine("\r\nDone!\r\n");
}
catch (Exception ex)
{
Console.WriteLine();
Console.WriteLine((ec != ErrorCode.None ? ec + ":" : String.Empty) + ex.Message);
}
finally
{
if (MyUsbDevice != null)
{
if (MyUsbDevice.IsOpen)
{
// If this is a "whole" usb device (libusb-win32, linux libusb-1.0)
// it exposes an IUsbDevice interface. If not (WinUSB) the
// 'wholeUsbDevice' variable will be null indicating this is
// an interface of a device; it does not require or support
// configuration and interface selection.
IUsbDevice wholeUsbDevice = MyUsbDevice as IUsbDevice;
if (!ReferenceEquals(wholeUsbDevice, null))
{
// Release interface #0.
wholeUsbDevice.ReleaseInterface(0);
}
MyUsbDevice.Close();
}
MyUsbDevice = null;
// Free usb resources
UsbDevice.Exit();
}
// Wait for user input..
Console.ReadKey();
}
}
在此示例中，当我尝试打开 USB 设备时，结果为null. 因此，我尝试使用此示例检测来自任何 USB 设备的任何信号：
public static IDeviceNotifier UsbDeviceNotifier = DeviceNotifier.OpenDeviceNotifier();
private static void Main(string[] args)
{
// Hook the device notifier event
UsbDeviceNotifier.OnDeviceNotify += OnDeviceNotifyEvent;
// Exit on and key pressed.
Console.Clear();
Console.WriteLine();
Console.WriteLine("Waiting for system level device events..");
Console.Write("[Press any key to exit]");
while (!Console.KeyAvailable)
Application.DoEvents();
UsbDeviceNotifier.Enabled = false; // Disable the device notifier
// Unhook the device notifier event
UsbDeviceNotifier.OnDeviceNotify -= OnDeviceNotifyEvent;
}
private static void OnDeviceNotifyEvent(object sender, DeviceNotifyEventArgs e)
{
// A Device system-level event has occured
Console.SetCursorPosition(0,Console.CursorTop);
Console.WriteLine(e.ToString()); // Dump the event info to output.
Console.WriteLine();
Console.Write("[Press any key to exit]");
}`
在这个例子中，我只能检测connect和disconnect发出信号。所以我尝试使用 LibUsbDotNet 连接到 USB 键盘/鼠标端口，但这也不起作用。
看来我
severely不明白这里需要做什么。
接下来，我什至尝试通过 SO: USB Device Connected的示例检查是否连接了某个 USB 设备 ，即使这样也没有用。
总结一下，我需要这样做：
- 连接到扫描仪所连接的 USB 端口（并监听它通过该端口发送的信号）。
- 检测来自扫描按钮的信号：
- 当检测到来自 2. 的信号时，我会向扫描仪发送一个信号，以使用我自己的配置使用 TWAIN 或 ISIS lib 进行扫描。