当我生成border-router.hex,并用Flash Programmer对节点进行编程后,运行命令sudo ./tunslip6 -s /dev/ttyUSB0 aaaa::1/64
,有如下所示的打印信息,没有其他进一步的打印,有人能遇到吗?问题是什么?
user@instant-contiki:~/sensinode/contiki-sensinode-cc-ports/tools$ sudo ./tunslip6 -s /dev/ttyUSB0 aaaa::1/64
[sudo] password for user:
********SLIP started on ``/dev/ttyUSB0''
opened tun device ``/dev/tun0''
ifconfig tun0 inet `hostname` up
ifconfig tun0 add aaaa::1/64
ifconfig tun0 add fe80::0:0:0:1/64
ifconfig tun0
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:127.0.1.1 P-t-P:127.0.1.1 Mask:255.255.255.255
inet6 addr: fe80::1/64 Scope:Link
inet6 addr: aaaa::1/64 Scope:Global
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)