虽然我一直在使用 OpenSplice V5 连接在不同节点上运行的平台，但现在我将 OPensplice 升级到 V6.3，但我的平台上出现故障，好像没有连接一样。
我所做的是我尝试在默认的 hello world 示例上将 helloWorld windows 版本（一个 32 位和另一个 64 位）连接在一起，但没有成功。
有谁可以帮助解决这个问题并建议在 ospl.xml 文件中必须微调哪些参数才能使用单播进行网络连接？
谢谢，
问问题
151 次
1 回答
1
What I've seen before is that sometimes people use machines that have multiple interface-cards connected, in which case you have to explicitly configure the interface to use in the DDSI configuration (rather than the 'AUTO' default).
Furthermore, if you want to enforce unicast, you have to configure your unicast-peers in the DDSI discovery section of the config-file.
Note that DDSI also automatically switches between unicast and multicast depending on the number of discovered endpoints (i.e. it will use unicast in case only 1 endpoint is discovereed)
于 2014-05-13T13:17:49.270 回答