我正在学习 Verilog，这是我的第一个 ALU。
我不明白为什么输出不显示在测试程序块中。样本输出（水平滚动）：
FAIL: a=00010010000101010011010100100100, b=11000000100010010101111010000001, op=101, z=zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz, expect=11010010100111010111111110100101
FAIL: a=10000100100001001101011000001001, b=10110001111100000101011001100011, op=101, z=zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz, expect=10110101111101001101011001101011
为什么不计算z？
铝型材
module yAlu(z, ex, a, b, op);
input [31:0] a, b;
input [2:0] op;
output[31:0] z;
output ex;
wire [31:0] andRes, orRes, arithmRes, slt;
wire cout;
assign slt = 0; // not supported
assign ex = 0; // not supported
and myand[31:0] (andRes, a, b);
or myor[31:0](orRes, a, b);
//Instantiating yArith adder/subtractor from addSub.v
yArith addSub(arithmRes, cout, a, b, op[2]);
//Instantiating 4-to-1 32-bit multiplexor from 4to1Mux.v
yMux4to1 multiplexor(z, andRes, orRes, arithmRes, slt, op[1:0]);
endmodule
多路复用器：
// 1-bit 2 to 1 selector
module yMux1(z, a, b, c);
output z;
input a, b, c;
wire notC, upper, lower;
not my_not(notC, c);
and upperAnd(upper, a, notC);
and lowerAnd(lower, c, b);
or my_or(z, upper, lower);
endmodule
//--------------------------------------------
// n-bit 2 to 1 selector
module yMux(z, a, b, c);
parameter SIZE = 2;
output [SIZE-1:0] z;
input [SIZE-1:0] a, b;
input c;
yMux1 mine[SIZE-1:0] (z, a, b, c);
endmodule
//--------------------------------------------
// n-bit 4-to-1 multiplexor
module yMux4to1(z, a0, a1, a2, a3, c);
parameter SIZE = 32;
output [SIZE-1:0] z;
input [SIZE-1:0] a0, a1, a2, a3;
input [1:0] c;
wire [SIZE-1:0] zLo, zHi;
yMux #(.SIZE(32)) lo(zLo, a0, a1, c[0]);
yMux #(.SIZE(32)) hi(zLo, a2, a3, c[0]);
yMux #(.SIZE(32)) final(zLo, zLo, zHi, c[1]);
// c in array is important (see LabL4.v page)
endmodule
//----------------------------------------------
加法器/减法器块：
// A simple 1-bit full adder
module yAdder1(z, cout, a, b, cin);
output z, cout;
input a, b, cin;
xor left_xor(tmp, a, b);
xor right_xor(z, cin, tmp);
and left_and(outL, a, b);
and right_and(outR, tmp, cin);
or my_or(cout, outR, outL);
endmodule
//----------------------------------------------
// 32-bit adder with 1 bit carry
module yAdder(z, cout, a, b, cin);
output [31:0] z;
output cout;
input [31:0] a, b;
input cin;
wire [31:0] in, out;
yAdder1 adder[31:0](z, out, a, b, in);
assign in[0] = cin;
assign in[1] = out[0];
assign in[2] = out[1];
assign in[3] = out[2];
assign in[4] = out[3];
assign in[5] = out[4];
assign in[6] = out[5];
assign in[7] = out[6];
assign in[8] = out[7];
assign in[9] = out[8];
assign in[10] = out[9];
assign in[11] = out[10];
assign in[12] = out[11];
assign in[13] = out[12];
assign in[14] = out[13];
assign in[15] = out[14];
assign in[16] = out[15];
assign in[17] = out[16];
assign in[18] = out[17];
assign in[19] = out[18];
assign in[20] = out[19];
assign in[21] = out[20];
assign in[22] = out[21];
assign in[23] = out[22];
assign in[24] = out[23];
assign in[25] = out[24];
assign in[26] = out[25];
assign in[27] = out[26];
assign in[28] = out[27];
assign in[29] = out[28];
assign in[30] = out[29];
assign in[31] = out[30];
assign cout = out[31];
endmodule
//----------------------------------------------
// Arithmetic module. Adds if ctrl = 0, subtracts if ctrl = 1
module yArith(z, cout, a, b, ctrl);
output [31:0] z;
output cout;
input [31:0] a, b;
input ctrl;
wire [31:0] notB, tmp;
wire cin;
assign notB = ~b;
assign cin = ctrl;
yMux #(.SIZE(32)) mux(tmp, b, notB, ctrl);
yAdder adderSubtractor(z, cout, a, tmp, cin);
endmodule
//----------------------------------------------
测试仪：
module labL;
reg [31:0] a, b;
reg [31:0] expect;
reg [2:0] op;
wire ex;
wire[31:0] z;
reg ok, flag;
yAlu mine(z, ex, a, b, op);
initial
begin
repeat(10)
begin
a = $random;
b = $random;
op = 3'b101;
//flag = $value$plusargs("op=%d", op);
#10;
// ERROR CASE
if (op === 3'b011)
$display("Error!");
else if (op === 3'b111)
$display("Error!");
// ARITHM CASE
else if(op === 3'b010)
expect = a + b;
else if(op === 3'b110)
expect = a + ~b + 1;
// AND CASE
else if(op === 3'b000)
expect = a & b;
else if (op === 3'b100)
expect = a & b;
// OR CASE
else if (op === 3'b001)
expect = a | b;
else if (op === 3'b101)
expect = a | b;
// DONE WITH CASES;
#5;
if (expect === z)
$display("PASS: a=%b, b=%b, op=%b, z=%b", a, b, op, z, ex);
else
$display("FAIL: a=%b, b=%b, op=%b, z=%b, expect=%b", a, b, op, z, expect);
end
$finish;
end
endmodule