0

Description of the problem:

  1. Insert USB-HID Device (Barcode scanner) on a clean Windows XP Machine.
  2. After windows loads the USB-HID Driver.
  3. Windows XP pops a dialog box asking the user to reboot the machine. (This is the problem)

Scenario:

  1. Remotely Deploy a software package to talk to these devices. (no hardware at this point)
  2. Remotely reboot machines.
  3. Hardware is added to each machine. (no reboot)

Investigation:

  1. Windows adds a control class referencing the "usb.inf" file.
  2. Windows adds a device class referencing the control class.
  3. Windows adds a enumerates the device referencing the device and HIDClass.

I believe what needs to be done is to "Pre-load" or "Pre-install" the driver, but we do not provide the INF files (provided via usb.inf).

Our other drivers utilize dpinst to handle installation on a different driver interface (btw this procedure does work for the desired behavior), but we are providing those INF / CAT / SYS files.

Is it possible to leverage SetupCopyOEMInf to perform this function?

What other avenues could be pursued to pre-load/pre-install this driver?

4

1 回答 1

1

事实证明，问题是在设备枚举其子设备之前连接到设备，锁定设备树，这导致在枚举最后一个设备时出现“请重新启动窗口”对话框。

于 2014-03-06T22:42:11.903 回答