我正在尝试从连接到处于主机模式的 Android 手机的 USB 设备中获取一些数据。我可以向它发送数据,但读取失败。
我已经查看了几个 示例并尝试了所有可能的方法,但我没有任何 USB 通信经验,尽管现在我知道一点,而且我一直坚持这个我愿意承认的时间更长。
我对端点配置不是很熟悉,但我知道我的设备使用 CDC 类型的通信方法,并且输出(从手机到设备)和输入都已注册。
这是使用连接到手机的唯一设备管理 USB 连接的整个课程,它还没有完成,但我想在继续之前让阅读部分开始工作。
public class UsbCommunicationManager
{
static final String ACTION_USB_PERMISSION = "com.android.example.USB_PERMISSION";
UsbManager usbManager;
UsbDevice usbDevice;
UsbInterface intf = null;
UsbEndpoint input, output;
UsbDeviceConnection connection;
PendingIntent permissionIntent;
Context context;
byte[] readBytes = new byte[64];
public UsbCommunicationManager(Context context)
{
this.context = context;
usbManager = (UsbManager) context.getSystemService(Context.USB_SERVICE);
// ask permission from user to use the usb device
permissionIntent = PendingIntent.getBroadcast(context, 0, new Intent(ACTION_USB_PERMISSION), 0);
IntentFilter filter = new IntentFilter(ACTION_USB_PERMISSION);
context.registerReceiver(usbReceiver, filter);
}
public void connect()
{
// check if there's a connected usb device
if(usbManager.getDeviceList().isEmpty())
{
Log.d("trebla", "No connected devices");
return;
}
// get the first (only) connected device
usbDevice = usbManager.getDeviceList().values().iterator().next();
// user must approve of connection
usbManager.requestPermission(usbDevice, permissionIntent);
}
public void stop()
{
context.unregisterReceiver(usbReceiver);
}
public String send(String data)
{
if(usbDevice == null)
{
return "no usb device selected";
}
int sentBytes = 0;
if(!data.equals(""))
{
synchronized(this)
{
// send data to usb device
byte[] bytes = data.getBytes();
sentBytes = connection.bulkTransfer(output, bytes, bytes.length, 1000);
}
}
return Integer.toString(sentBytes);
}
public String read()
{
// reinitialize read value byte array
Arrays.fill(readBytes, (byte) 0);
// wait for some data from the mcu
int recvBytes = connection.bulkTransfer(input, readBytes, readBytes.length, 3000);
if(recvBytes > 0)
{
Log.d("trebla", "Got some data: " + new String(readBytes));
}
else
{
Log.d("trebla", "Did not get any data: " + recvBytes);
}
return Integer.toString(recvBytes);
}
public String listUsbDevices()
{
HashMap<String, UsbDevice> deviceList = usbManager.getDeviceList();
if(deviceList.size() == 0)
{
return "no usb devices found";
}
Iterator<UsbDevice> deviceIterator = deviceList.values().iterator();
String returnValue = "";
UsbInterface usbInterface;
while(deviceIterator.hasNext())
{
UsbDevice device = deviceIterator.next();
returnValue += "Name: " + device.getDeviceName();
returnValue += "\nID: " + device.getDeviceId();
returnValue += "\nProtocol: " + device.getDeviceProtocol();
returnValue += "\nClass: " + device.getDeviceClass();
returnValue += "\nSubclass: " + device.getDeviceSubclass();
returnValue += "\nProduct ID: " + device.getProductId();
returnValue += "\nVendor ID: " + device.getVendorId();
returnValue += "\nInterface count: " + device.getInterfaceCount();
for(int i = 0; i < device.getInterfaceCount(); i++)
{
usbInterface = device.getInterface(i);
returnValue += "\n Interface " + i;
returnValue += "\n\tInterface ID: " + usbInterface.getId();
returnValue += "\n\tClass: " + usbInterface.getInterfaceClass();
returnValue += "\n\tProtocol: " + usbInterface.getInterfaceProtocol();
returnValue += "\n\tSubclass: " + usbInterface.getInterfaceSubclass();
returnValue += "\n\tEndpoint count: " + usbInterface.getEndpointCount();
for(int j = 0; j < usbInterface.getEndpointCount(); j++)
{
returnValue += "\n\t Endpoint " + j;
returnValue += "\n\t\tAddress: " + usbInterface.getEndpoint(j).getAddress();
returnValue += "\n\t\tAttributes: " + usbInterface.getEndpoint(j).getAttributes();
returnValue += "\n\t\tDirection: " + usbInterface.getEndpoint(j).getDirection();
returnValue += "\n\t\tNumber: " + usbInterface.getEndpoint(j).getEndpointNumber();
returnValue += "\n\t\tInterval: " + usbInterface.getEndpoint(j).getInterval();
returnValue += "\n\t\tType: " + usbInterface.getEndpoint(j).getType();
returnValue += "\n\t\tMax packet size: " + usbInterface.getEndpoint(j).getMaxPacketSize();
}
}
}
return returnValue;
}
private void setupConnection()
{
// find the right interface
for(int i = 0; i < usbDevice.getInterfaceCount(); i++)
{
// communications device class (CDC) type device
if(usbDevice.getInterface(i).getInterfaceClass() == UsbConstants.USB_CLASS_CDC_DATA)
{
intf = usbDevice.getInterface(i);
// find the endpoints
for(int j = 0; j < intf.getEndpointCount(); j++)
{
if(intf.getEndpoint(j).getDirection() == UsbConstants.USB_DIR_OUT && intf.getEndpoint(j).getType() == UsbConstants.USB_ENDPOINT_XFER_BULK)
{
// from android to device
output = intf.getEndpoint(j);
}
if(intf.getEndpoint(j).getDirection() == UsbConstants.USB_DIR_IN && intf.getEndpoint(j).getType() == UsbConstants.USB_ENDPOINT_XFER_BULK)
{
// from device to android
input = intf.getEndpoint(j);
}
}
}
}
}
private final BroadcastReceiver usbReceiver = new BroadcastReceiver()
{
public void onReceive(Context context, Intent intent)
{
String action = intent.getAction();
if(ACTION_USB_PERMISSION.equals(action))
{
// broadcast is like an interrupt and works asynchronously with the class, it must be synced just in case
synchronized(this)
{
if(intent.getBooleanExtra(UsbManager.EXTRA_PERMISSION_GRANTED, false))
{
setupConnection();
connection = usbManager.openDevice(usbDevice);
connection.claimInterface(intf, true);
// set flow control to 8N1 at 9600 baud
int baudRate = 9600;
byte stopBitsByte = 1;
byte parityBitesByte = 0;
byte dataBits = 8;
byte[] msg = {
(byte) (baudRate & 0xff),
(byte) ((baudRate >> 8) & 0xff),
(byte) ((baudRate >> 16) & 0xff),
(byte) ((baudRate >> 24) & 0xff),
stopBitsByte,
parityBitesByte,
(byte) dataBits
};
connection.controlTransfer(UsbConstants.USB_TYPE_CLASS | 0x01, 0x20, 0, 0, msg, msg.length, 5000);
}
else
{
Log.d("trebla", "Permission denied for USB device");
}
}
}
else if(UsbManager.ACTION_USB_DEVICE_DETACHED.equals(action))
{
Log.d("trebla", "USB device detached");
}
}
};
}
我不断-1
从read()
指示某种错误的方法中获取信息,它总是超时。也许问题出在连接配置上,我已经尝试了几次(阅读:反复试验),但都没有奏效,令人惊讶的是,我不需要任何配置即可将数据发送到设备。
编辑
还必须注意的是,我使用的电缆是 micro-USB 到 micro-USB,它只能以一种方式工作,即只有当插头 A 连接到手机并且插头 B 连接到手机时,我的设备才由我的手机供电设备,而不是相反...看起来很奇怪。当以正确的方式插入时,我能够发送数据但无法接收的事实仍然存在。
编辑 2
我发现其他人也有同样的问题,但似乎他无法解决。
编辑 3
我终于在此页面上找到了解决方案:
另一个主要的疏忽是主机没有机制通知设备主机端有一个数据接收器准备好接受数据。这意味着设备可能会在主机未侦听时尝试发送数据,从而导致传输例程中的长时间阻塞超时。因此,强烈建议尽可能使用虚拟串行线路 DTR(数据终端就绪)信号来确定主机应用程序是否已准备好接收数据。
所以 DTR 信号是强制性的,我所要做的就是将它添加到接口配置中:
connection.controlTransfer(0x21, 0x22, 0x1, 0, null, 0, 0);
编辑 4
如果有人感兴趣,我完成了这个项目,它是开源的,并发布在我的 GitHub 帐户上。虽然它一直不稳定(请参阅注释),我不打算再研究它,但它可以工作。随意将它用于您自己的项目。