arduino - Arduino 运行 128*128 LCD 温度

Question

我得到了彩色 LCD Shield https://www.sparkfun.com/products/9363 并尝试了一些代码来运行程序，但因为我是 arduino lcd 项目的新手。我没有我应该如何更改代码？这是来自的代码：
http ://learn.adafruit.com/thermocouple/using-a-thermocouple

/*************************************************** 
  This is an example for the Adafruit Thermocouple Sensor w/MAX31855K

  Designed specifically to work with the Adafruit Thermocouple Sensor
  ----> https://www.adafruit.com/products/269

  These displays use SPI to communicate, 3 pins are required to  
  interface
  Adafruit invests time and resources providing this open source code, 
  please support Adafruit and open-source hardware by purchasing 
  products from Adafruit!

  Written by Limor Fried/Ladyada for Adafruit Industries.  
  BSD license, all text above must be included in any redistribution
 ****************************************************/

#include "Adafruit_MAX31855.h"
#include <LiquidCrystal.h>

int thermoCLK = 3;
int thermoCS = 4;
int thermoDO = 5;

// Initialize the Thermocouple
Adafruit_MAX31855 thermocouple(thermoCLK, thermoCS, thermoDO);
// initialize the library with the numbers of the interface pins
LiquidCrystal lcd(7, 8, 9, 10, 11, 12);


void setup() {
  Serial.begin(9600);
  // set up the LCD's number of columns and rows: 
  lcd.begin(16, 2);

  lcd.print("MAX31855 test");
  // wait for MAX chip to stabilize
  delay(500);
}

void loop() {
  // basic readout test, just print the current temp
   lcd.setCursor(0, 0);
   lcd.print("Int. Temp = ");
   lcd.println(thermocouple.readInternal());
   lcd.print("  "); 

   double c = thermocouple.readCelsius();
   lcd.setCursor(0, 1);
   if (isnan(c)) 
   {
     lcd.print("T/C Problem");
   } 
   else 
   {
     lcd.print("C = "); 
     lcd.print(c);
     lcd.print("  "); 
   }

   delay(1000);
}