1

我需要定期重新连接到外围设备，但尝试重新连接崩溃。

首先，我的中心扫描外围设备的 UUID，然后连接，然后将 peripheral.UUID 存储到 CFUUIDRef 变量中，然后断开连接。接下来，要重新连接，它会从变量中检索 UUID，然后在它执行 retreivePeripherals 时崩溃并出现“EXC_BAD_ACCESS”，或者稍后在执行后续的 didRetrievePeripherals 时崩溃。

也许我没有正确存储 UUID，但我没有看到错误。谢谢。

这是代码............

-(void)centralManager:(CBCentralManager *)central didConnectPeripheral:(CBPeripheral *)peripheral
{
    ///////////////////////   C E N T R A L   C O N N E C T E D   P E R I P H E R A L   //////////////////////

    [self.centralManager   stopScan];
    // Make sure we get the discovery callbacks
    peripheral.delegate = pwr_tx_management;

    switch( PWR_TX_manager.present_operation )
    {
        case POLLING_FOR_GENERIC_DVINEWAVE_DEVICE:
            if( dbg_ev )        printf("1");        
            // Add new record for connection device to local system status database:
            update_device_record( &packed_ad_record    );       //      ==>  device_record_index
            // Store peripheral UUID for later, perioed re-connection for polling:
            area_device_status[ device_area ][ device_record_index ].peripheral_UUID = peripheral.UUID;
                                 // uses declaration:  CFUUIDRef            peripheral_UUID;

    // Disconnect:        !!!
        [self.centralManager   cancelPeripheralConnection:   peripheral];
        break;


        case OPERATION_SPECIFIC_POLLING:
                                        NSLog( @"(7) didConnectPeripheral   " );
            if( dbg_ev )        printf("2");        
            // Proceed with reading device's status and updating local database:
                [peripheral   discoverServices:nil];    // request service, characteristics, then request device send its packed status record

            break;
        default:
            break;
    }    
}





// Connects to device specificed by index next_dbase_record .
void connect_specific_device( void )
{
                                                        NSLog( @"(5) connect_specific_device    - next_dbase_record = %d", next_dbase_record );
    CFUUIDRef uuid = area_device_status[ device_area ][ next_dbase_record ].peripheral_UUID;

    if( uuid )
    {
        // Request call to didRetrievePeripherals() with CBPeripheral:
        [pwr_tx_management.centralManager retrievePeripherals:[NSArray arrayWithObject: (id)CFBridgingRelease(uuid)]];     <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< crashes here with:  Thread 1: EXC_BAD_ACCESS
    }
    else
    {
        NSLog( @"   - missing area_device_status[][].peripheral_UUID ");
    }

}



// Iniates connection to peripheral device specified before by retrievePeripherals.
- (void) centralManager:(CBCentralManager *)central didRetrievePeripherals:(CBPeripheral *)peripheral
{
    NSLog( @"(6) didRetrievePeripherals");
    [central   connectPeripheral:peripheral   options:nil];
}
4

2 回答 2

1

解决方案是存储 ASCII UUID，并使用retrieveConnectedPeripherals 和retreivePeripherals。存储指针可能失败，因为没有保留数据。我还实现了 tdevoy 的解决方案。didRetrievePeripherals 被调用，但其外围设备列表为空，因此我添加了retrieveConnectedPeripherals 和 didRetrieveConnectedPeripherals，它们被调用，并列出了我成功连接到的外围设备。（Apple Prog. 指南含糊不清，缺少示例代码。）

于 2013-09-07T17:56:14.843 回答
1

让我先说我是在车上用手机写的，所以请原谅我的格式不好。生病只是指出我看到的主要问题。您没有采用正确的委托方法：

这是：

- (void) centralManager:(CBCentralManager *)central didRetrievePeripherals:(NSArray *) peripherals

不是这个：

- (void) centralManager:(CBCentralManager *)central didRetrievePeripherals:(CBPeripheral *)peripheral

我也不明白你为什么这样做cfbridgingrelease。只需将其作为@[(id)yourCfuuidref]. 您没有创建该 cfuuid。

于 2013-09-07T00:13:35.207 回答