0

我的一个客户需要一个文件(图像)通过 curl(php-curl) 发送到 plupload php 脚本。问题是文件似乎应该与块一起发送。

您能否提示我如何将带有 php 的文件发送到该脚本?

这是接受文件的上传脚本文件。

    <?php
/**
 * upload.php
 *
 * Copyright 2009, Moxiecode Systems AB
 * Released under GPL License.
 *
 * License: http://www.plupload.com/license
 * Contributing: http://www.plupload.com/contributing
 */

// HTTP headers for no cache etc
header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
header("Last-Modified: " . gmdate("D, d M Y H:i:s") . " GMT");
header("Cache-Control: no-store, no-cache, must-revalidate");
header("Cache-Control: post-check=0, pre-check=0", false);
header("Pragma: no-cache");

// Settings
$targetDir = ini_get("upload_tmp_dir") . DIRECTORY_SEPARATOR . "plupload";
//$targetDir = 'uploads';

$cleanupTargetDir = true; // Remove old files
$maxFileAge = 5 * 3600; // Temp file age in seconds

// 5 minutes execution time
@set_time_limit(5 * 60);

// Uncomment this one to fake upload time
// usleep(5000);

// Get parameters
$chunk = isset($_REQUEST["chunk"]) ? intval($_REQUEST["chunk"]) : 0;
$chunks = isset($_REQUEST["chunks"]) ? intval($_REQUEST["chunks"]) : 0;
$fileName = isset($_REQUEST["name"]) ? $_REQUEST["name"] : '';

// Clean the fileName for security reasons
$fileName = preg_replace('/[^\w\._]+/', '_', $fileName);

// Make sure the fileName is unique but only if chunking is disabled
if ($chunks < 2 && file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName)) {
    $ext = strrpos($fileName, '.');
    $fileName_a = substr($fileName, 0, $ext);
    $fileName_b = substr($fileName, $ext);

    $count = 1;
    while (file_exists($targetDir . DIRECTORY_SEPARATOR . $fileName_a . '_' . $count . $fileName_b))
        $count++;

    $fileName = $fileName_a . '_' . $count . $fileName_b;
}

$filePath = $targetDir . DIRECTORY_SEPARATOR . $fileName;

// Create target dir
if (!file_exists($targetDir))
    @mkdir($targetDir);

// Remove old temp files    
if ($cleanupTargetDir) {
    if (is_dir($targetDir) && ($dir = opendir($targetDir))) {
        while (($file = readdir($dir)) !== false) {
            $tmpfilePath = $targetDir . DIRECTORY_SEPARATOR . $file;

            // Remove temp file if it is older than the max age and is not the current file
            if (preg_match('/\.part$/', $file) && (filemtime($tmpfilePath) < time() - $maxFileAge) && ($tmpfilePath != "{$filePath}.part")) {
                @unlink($tmpfilePath);
            }
        }
        closedir($dir);
    } else {
        die('{"jsonrpc" : "2.0", "error" : {"code": 100, "message": "Failed to open temp directory."}, "id" : "id"}');
    }
}   

// Look for the content type header
if (isset($_SERVER["HTTP_CONTENT_TYPE"]))
    $contentType = $_SERVER["HTTP_CONTENT_TYPE"];

if (isset($_SERVER["CONTENT_TYPE"]))
    $contentType = $_SERVER["CONTENT_TYPE"];

// Handle non multipart uploads older WebKit versions didn't support multipart in HTML5
if (strpos($contentType, "multipart") !== false) {
    if (isset($_FILES['file']['tmp_name']) && is_uploaded_file($_FILES['file']['tmp_name'])) {
        // Open temp file
        $out = @fopen("{$filePath}.part", $chunk == 0 ? "wb" : "ab");
        if ($out) {
            // Read binary input stream and append it to temp file
            $in = @fopen($_FILES['file']['tmp_name'], "rb");

            if ($in) {
                while ($buff = fread($in, 4096))
                    fwrite($out, $buff);
            } else
                die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');
            @fclose($in);
            @fclose($out);
            @unlink($_FILES['file']['tmp_name']);
        } else
            die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
    } else
        die('{"jsonrpc" : "2.0", "error" : {"code": 103, "message": "Failed to move uploaded file."}, "id" : "id"}');
} else {
    // Open temp file
    $out = @fopen("{$filePath}.part", $chunk == 0 ? "wb" : "ab");
    if ($out) {
        // Read binary input stream and append it to temp file
        $in = @fopen("php://input", "rb");

        if ($in) {
            while ($buff = fread($in, 4096))
                fwrite($out, $buff);
        } else
            die('{"jsonrpc" : "2.0", "error" : {"code": 101, "message": "Failed to open input stream."}, "id" : "id"}');

        @fclose($in);
        @fclose($out);
    } else
        die('{"jsonrpc" : "2.0", "error" : {"code": 102, "message": "Failed to open output stream."}, "id" : "id"}');
}

// Check if file has been uploaded
if (!$chunks || $chunk == $chunks - 1) {
    // Strip the temp .part suffix off 
    rename("{$filePath}.part", $filePath);
}

die('{"jsonrpc" : "2.0", "result" : null, "id" : "id"}');
4

1 回答 1

1

我评论了 php 脚本的以下几行,其中似乎涉及分块。当请求分块参数不存在时,您将看到整个文件案例被包含为默认案例。

// $chunk is the index of the chunk being uploaded. 
// Considered as 0 if not present in the request (whole file, or fist chunk in chunking mode)
$chunk = isset($_REQUEST["chunk"]) ? intval($_REQUEST["chunk"]) : 0;

// $chunks is the number of upload chunks. 
// Considered as 0 (whole file, no chunking) if not present in the request
$chunks = isset($_REQUEST["chunks"]) ? intval($_REQUEST["chunks"]) : 0;

 // if handling the first chunk (or whole file) open temp file in create mode, else in append mode
 $out = @fopen("{$filePath}.part", $chunk == 0 ? "wb" : "ab");

// if not in chunking mode (!$chunks) or finished processing last chunk, rename the temp file to target nam
if (!$chunks || $chunk == $chunks - 1)

希望这会有所帮助

根据您的评论,当前页面应该发布文件,文件名为 defaultname.txt

<html> 
  <head> 
   <title>Upload Form</title> 
   </head> 
<body> 
 <form enctype="multipart/form-data" action="/upload.php"; method="POST"> 
    <input type="text" name="name" size="20" value="defaultname.txt"/> <br /><br /> 
    <input type="file" name="file" size="20" /> <br /><br /> 
    <input type="submit" value="upload" /> 
 </form> 
</body> 
</html>
于 2013-09-03T14:03:20.777 回答