6

我只是想让 RTP 示例正常工作，但是由于缺少插件或不正确的引脚，我看到的每个示例都没有执行。

这似乎是最有希望的，但是，尽管服务器和客户端似乎正常启动并进入“播放”，但什么也没有发生：

服务器：

gst-launch -v videotestsrc ! \
    video/x-raw-rgb, format=\(fourcc\)RGB, width=4, height=4, frame-rate=1/1 ! rtpvrawpay !
    udpsink host=127.0.0.1

服务器输出：

/GstPipeline:pipeline0/GstUDPSink:udpsink0.GstPad:sink: caps = application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)RAW, sampling=(string)RGB, depth=(string)8, width=(string)4, height=(string)4, colorimetry=(string)SMPTE240M, payload=(int)96, ssrc=(uint)3779397700, clock-base=(uint)1161131286, seqnum-base=(uint)43390
Pipeline is PREROLLED ...
Setting pipeline to PLAYING ...

客户：

gst-launch-0.10 -v udpsrc caps="application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)RAW, sampling=(string)RGB, depth=(string)8, width=(string)4, height=(string)4, colorimetry=(string)SMPTE240M, payload=(int)96, ssrc=(uint)3779397700, clock-base=(uint)1161131286, seqnum-base=(uint)43390" ! rtpvrawdepay ! xvimagesink

客户端输出：

Setting pipeline to PAUSED ...
Pipeline is live and does not need PREROLL ...
Setting pipeline to PLAYING ...
New clock: GstSystemClock
/GstPipeline:pipeline0/GstRtpVRawDepay:rtpvrawdepay0.GstPad:src: caps = video/x-raw-rgb, width=(int)4, height=(int)4, format=(fourcc)0x00000000, framerate=(fraction)0/1, endianness=(int)4321, red_mask=(int)16711680, green_mask=(int)65280, blue_mask=(int)255, bpp=(int)24, depth=(int)24
/GstPipeline:pipeline0/GstRtpVRawDepay:rtpvrawdepay0.GstPad:sink: caps = application/x-rtp, media=(string)video, payload=(int)96, clock-rate=(int)90000, encoding-name=(string)RAW, sampling=(string)RGB, depth=(string)8, width=(string)4, height=(string)4, colorimetry=(string)SMPTE240M, ssrc=(uint)3779397700, clock-base=(uint)1161131286, seqnum-base=(uint)43390
4

1 回答 1

7

这些工作：

服务器：

gst-launch-0.10 -v \
gstrtpbin name=rtpbin1 \
videotestsrc ! x264enc ! rtph264pay ! rtpbin1.send_rtp_sink_0 \
rtpbin1.send_rtp_src_0 ! udpsink host=127.0.0.1 port=5011 \
rtpbin1.send_rtcp_src_0 ! udpsink host=127.0.0.1 port=5012 \
udpsrc port=5013 ! rtpbin1.recv_rtcp_sink_0

客户：

gst-launch-0.10 -v \
videomixer name=mix ! ffmpegcolorspace ! autovideosink sync=false async=false \
gstrtpbin name=rtpbin1 \
udpsrc port=5011 caps = "application/x-rtp, media=(string)video, clock-rate=(int)90000, encoding-name=(string)H264, sprop-parameter-sets=(string)\"Z0LAFdkBQfsBEAAAAwAXc1lAAPFi5IAA\\,aMuMsg\\=\\=\", ssrc=(uint)595281375, payload=(int)96, clock-base=(uint)3105254905, seqnum-base=(uint)59233" ! rtpbin1.recv_rtp_sink_0 rtpbin1. ! rtph264depay ! queue ! ffdec_h264 ! videobox border-alpha=0 top=0 left=0 ! mix. \
udpsrc port=5012 ! rtpbin1.recv_rtcp_sink_0 \
rtpbin1.send_rtcp_src_0 ! udpsink port=5013 host=127.0.0.1
于 2013-06-15T21:53:49.953 回答