2

我正在编写 VHDL 代码，我在其中使用tempx和tempz作为变量并尝试将它们连接起来，但我在下面注释的行上有一些错误。请问怎么做的建议？

错误是：

Error (10500): VHDL syntax error at ArrayDivider.vhd(53) near text ":=";  expecting "(", or "'", or ".",
Error (10500): VHDL syntax error at ArrayDivider.vhd(53) near text "&";  expecting "(", or "'", or "."

代码：

------- Array Divider --------

library ieee;
use ieee.std_logic_1164.all;

----- Entity -----

entity ArrayDivider is
    generic
    (
        ---- For x/y
        Nx : integer := 8; --- Number of bits in x
        Ny : integer := 4  --- Number of bits in y
    );
    port
    (
        ipx : in std_logic_vector(Nx-1 downto 0); -- Input x --- (Nx-1 downto 0)
        ipy : in std_logic_vector(Ny-1 downto 0); -- Input y --- (Ny-1 downto 0)
        opd : out std_logic_vector(Nx-Ny downto 0); -- Quotient --- (Nx-Ny downto 0)
        opr : out std_logic_vector(Ny-1 downto 0) -- Remainder --- (Ny-1 downto 0)
    );
end ArrayDivider;

----- Architecture -----

Architecture Div of ArrayDivider is
--- This component will compare ipy with parts of ipx of given bits and ---
--- generate bits of divident as well as partial subtraction results ---
--- x = parts of ipx (tempx), y = ipy, op = opd(x) and final z = opr ---    

    component Cmp is
        generic
        (
            N : integer := 4
        );
        port
        (
            x : in std_logic_vector(N-1 downto 0); --- N-1 downto 0
            y : in std_logic_vector(N-1 downto 0); --- N-1 downto 0
            z : out std_logic_vector(N-1 downto 0); --- N-1 downto 0
            op : out std_logic
        );
    end Component;
    variable tempx : std_logic_vector(Ny-1 downto 0) := ipx(Nx-1 downto Nx-Ny); --- (Ny-1 downto 0) (Nx-1 downto Nx-Ny)
    variable tempz : std_logic_vector(Ny-1 downto 0); --- (Ny-1 downto 0)
begin
    lup:
        for a in Nx-Ny downto 0 generate --- Nx-Ny downto 0
        begin           
    Cmpa:   Cmp generic map(Ny) port map(tempx, ipy, tempz, opd(a)); --- (Ny)
    grea:   
            if(a > 0) generate
                tempx := tempz(Ny-2 downto 0) & ipx(a-1); --- (Ny-2 downto 0)
            end generate grea;  
    zero:   
            if(a = 0) generate
                opr <= tempz;
            end generate zero;
        end generate lup;
end Div;
4

1 回答 1

2

由于您没有使用进程，因此您应该使用信号而不是tempx和tempz的变量。您的第 53 行必须如下所示：

tempx <= tempz(Ny-2 downto 0) & ipx(a-1);

但是，可能使用过程更有意义。那么你必须将你的 cmp 组件实现为一个过程（在下面的示例中未完成）。该过程可能如下所示：

   ...
end Component;
begin

div_proc: process(ipy, ipx)
    variable tempx : std_logic_vector(Ny-1 downto 0) ; 
    variable tempz : std_logic_vector(Ny-1 downto 0); 
begin
    lup:
        for a in 1 downto 0 loop         
    -- Cmpa:   Cmp generic map(Ny) port map(tempx, ipy, tempz, opd(a)); 
        grea:   
            if(a > 0) then
                tempx := tempz(Ny-2 downto 0) & ipx(a-1);
            end if;  
        zero:   
            if(a = 0) then
            opr <= tempz;
            end if;
    end loop;
end process div_proc;
...
于 2013-03-23T17:03:45.740 回答