6

我在资源文件夹中有两个 PCM 声音文件。我使用了输入流并将它们转换为字节数组。

然后我通过归一化和添加music1和music2来处理它们并输出到字节数组输出。最后,放置输出数组并将其提供给 AudioTrack。

显然,我什么也没听到,而且有什么地方不对劲。

 private void mixSound() throws IOException {

    InputStream in1=getResources().openRawResource(R.raw.cheerapp2);      
    InputStream in2=getResources().openRawResource(R.raw.buzzer2);

     byte[] music1 = null;
     music1= new byte[in1.available()]; 
     music1=convertStreamToByteArray(in1);
     in1.close();


     byte[] music2 = null;
     music2= new byte[in2.available()]; 
     music2=convertStreamToByteArray(in2);
     in2.close();

     byte[] output = new byte[music1.length];

     audioTrack.play();

     for(int i=0; i < output.length; i++){

         float samplef1 = music1[i] / 128.0f;      //     2^7=128
         float samplef2 = music2[i] / 128.0f;


         float mixed = samplef1 + samplef2;
         // reduce the volume a bit:
         mixed *= 0.8;
         // hard clipping
         if (mixed > 1.0f) mixed = 1.0f;
         if (mixed < -1.0f) mixed = -1.0f;
        byte outputSample = (byte)(mixed * 128.0f);
         output[i] = outputSample;
         audioTrack.write(output, 0, i);
      }   //for loop


      public static byte[] convertStreamToByteArray(InputStream is) throws IOException {



    ByteArrayOutputStream baos = new ByteArrayOutputStream();
    byte[] buff = new byte[10240];
    int i = Integer.MAX_VALUE;
    while ((i = is.read(buff, 0, buff.length)) > 0) {
        baos.write(buff, 0, i);
    }

    return baos.toByteArray(); // be sure to close InputStream in calling function

}
4

1 回答 1

10

我尝试了您的代码(替换为我自己的一些音频文件)。我像这样初始化了一个 AudioTrack 实例,希望这与您的操作方式相似:

AudioTrack audioTrack = new AudioTrack(AudioManager.STREAM_MUSIC, 44100, AudioFormat.CHANNEL_OUT_STEREO, AudioFormat.ENCODING_PCM_16BIT, 44100, AudioTrack.MODE_STREAM);

并尝试运行它。它发出尖锐的声音,随着时间的推移声音越来越小。我检查了代码,问题是您在 mixSound() 方法的每次循环迭代中都将整个输出字节数组写入 audioTrack。

线

 audioTrack.write(output, 0, i);

需要移出循环并更改为

 audioTrack.write(output, 0, output.length);

因此,您将两个文件混合到输出字节数组中,然后一次写入整个内容。

因此,工作 mixSound 方法的代码如下所示:

private void mixSound() throws IOException {
    AudioTrack audioTrack = new AudioTrack(AudioManager.STREAM_MUSIC, 44100, AudioFormat.CHANNEL_OUT_STEREO, AudioFormat.ENCODING_PCM_16BIT, 44100, AudioTrack.MODE_STREAM);

    InputStream in1=getResources().openRawResource(R.raw.track1);      
    InputStream in2=getResources().openRawResource(R.raw.track2);

    byte[] music1 = null;
    music1= new byte[in1.available()]; 
    music1=convertStreamToByteArray(in1);
    in1.close();


    byte[] music2 = null;
    music2= new byte[in2.available()]; 
    music2=convertStreamToByteArray(in2);
    in2.close();

    byte[] output = new byte[music1.length];

    audioTrack.play();

    for(int i=0; i < output.length; i++){

        float samplef1 = music1[i] / 128.0f;      //     2^7=128
        float samplef2 = music2[i] / 128.0f;


        float mixed = samplef1 + samplef2;
        // reduce the volume a bit:
        mixed *= 0.8;
        // hard clipping
        if (mixed > 1.0f) mixed = 1.0f;

        if (mixed < -1.0f) mixed = -1.0f;

        byte outputSample = (byte)(mixed * 128.0f);
        output[i] = outputSample;

    }   //for loop
    audioTrack.write(output, 0, output.length);

}
于 2013-02-27T21:53:59.020 回答