3

以前，我使用CMSampleBufferGetAudioBufferListWithRetainedBlockBuffer. 现在我想使用范围做同样的事情（即我及时指定范围..按时间读取一小段音频，然后返回并再次读取）。我想使用时间范围的原因是 b/c 我想控制每次读取的大小（以适应具有最大大小的数据包）。

出于某种原因，每次读取之间总会有一个颠簸。在我的代码中，您会注意到我每次设置时间范围时都会启动 AVAssetReader 并结束它，这就是 b/c 在阅读器启动后我无法动态调整时间范围（有关更多详细信息，请参见此处）。

是不是开始和结束阅读器的成本太高而无法产生连续的实时体验？还是有其他我不知道的方法？

另请注意，这种抖动或滞后发生在我将时间间隔设置为的任何时间点。这让我相信以我的方式开始和结束阅读器对于实时音频播放来说太昂贵了。

- (void) setupReader 
{
    NSURL *assetURL = [NSURL URLWithString:@"ipod-library://item/item.m4a?id=1053020204400037178"];   
    songAsset = [AVURLAsset URLAssetWithURL:assetURL options:nil];

    track = [songAsset.tracks objectAtIndex:0];     
    nativeTrackASBD = [self getTrackNativeSettings:track];

    // set CM time parameters
    assetCMTime = songAsset.duration;
    CMTimeReadDurationInSeconds = CMTimeMakeWithSeconds(1, assetCMTime.timescale);
    currentCMTime = CMTimeMake(0,assetCMTime.timescale); 
}

-(void)readVBRPackets
{
    // make sure assetCMTime is greater than currentCMTime
    while (CMTimeCompare(assetCMTime,currentCMTime) == 1 )
    {
        NSError * error = nil;
        reader = [[AVAssetReader alloc] initWithAsset:songAsset error:&error];
        readerOutput = [AVAssetReaderTrackOutput assetReaderTrackOutputWithTrack:track
                                                                  outputSettings:nil];

        [reader addOutput:readerOutput];
        reader.timeRange = CMTimeRangeMake(currentCMTime, CMTimeReadDurationInSeconds);

        [reader startReading];

        while ((sample = [readerOutput copyNextSampleBuffer])) {
            CMItemCount numSamples = CMSampleBufferGetNumSamples(sample);
            if (numSamples == 0) {
                continue;
            }

            NSLog(@"reading sample");               

            CMBlockBufferRef CMBuffer = CMSampleBufferGetDataBuffer( sample );                                                         
            AudioBufferList audioBufferList;  

            OSStatus err = CMSampleBufferGetAudioBufferListWithRetainedBlockBuffer(
                                                                               sample,
                                                                               NULL,
                                                                               &audioBufferList,
                                                                               sizeof(audioBufferList),
                                                                               NULL,
                                                                               NULL,
                                                                               kCMSampleBufferFlag_AudioBufferList_Assure16ByteAlignment,
                                                                               &CMBuffer
                                                                                   );



            const AudioStreamPacketDescription   * inPacketDescriptions;
            size_t                               packetDescriptionsSizeOut;
            size_t inNumberPackets;

            CheckError(CMSampleBufferGetAudioStreamPacketDescriptionsPtr(sample, 
                                                                         &inPacketDescriptions,
                                                                         &packetDescriptionsSizeOut),
                       "could not read sample packet descriptions");

            inNumberPackets = packetDescriptionsSizeOut/sizeof(AudioStreamPacketDescription);

            AudioBuffer audioBuffer = audioBufferList.mBuffers[0];


            for (int i = 0; i < inNumberPackets; ++i)
            {

                SInt64 dataOffset = inPacketDescriptions[i].mStartOffset;
                UInt32 packetSize   = inPacketDescriptions[i].mDataByteSize;            

                size_t packetSpaceRemaining;
                packetSpaceRemaining = bufferByteSize - bytesFilled;

                // if the space remaining in the buffer is not 
                // enough for the data contained in this packet
                // then just write it
                if (packetSpaceRemaining < packetSize)
                {
                    [self enqueueBuffer];           
                }

                // copy data to the audio queue buffer
                AudioQueueBufferRef fillBuf = audioQueueBuffers[fillBufferIndex];
                memcpy((char*)fillBuf->mAudioData + bytesFilled, 
                       (const char*)(audioBuffer.mData + dataOffset), packetSize);                                                                

                // fill out packet description
                packetDescs[packetsFilled] = inPacketDescriptions[i];
                packetDescs[packetsFilled].mStartOffset = bytesFilled;

                bytesFilled += packetSize;
                packetsFilled += 1;

                // if this is the last packet, then ship it
                size_t packetsDescsRemaining = kAQMaxPacketDescs - packetsFilled;
                if (packetsDescsRemaining == 0) {          
                    [self enqueueBuffer];              
                }                  
            }

            CFRelease(CMBuffer);
            CMSampleBufferInvalidate(sample);
            CFRelease(sample);
        }

        [reader cancelReading];
        reader = NULL;
        readerOutput = NULL;

        currentCMTime = CMTimeAdd(currentCMTime, CMTimeReadDurationInSeconds);
    }


}
4

1 回答 1

5

我知道会发生什么 :-D 我花了将近一整天的时间才弄明白。

事实上，AVAssetReader 将前 1024 个样本（可能更多）淡入其中。这就是您听到抖动效果的原因。

我通过在我真正想要读取的位置之前读取 1024 个样本来修复它，然后跳过这 1024 个样本。

我希望它也对你有用。

于 2012-11-07T23:51:29.010 回答