问题：我正在使用在 VirtualBox 中运行星号 2.0 服务器的 AsteriskNow。我想使用 ODBC 模块将 Asterisk 与 MySQL 数据库连接起来。但它失败了。当我开始使用星号*CLI> odbc show 命令提示符显示“没有这样的命令 ODBC SHOW”
我的目标：在 asterisk 中配置 ODBC 以直接动态地从 Asterisk 的拨号方案访问 MySQL。
我做了什么：我在 VirtualBox 中安装了我的 AsteriskNow。asterisk 的版本是 2.0，CentOS 的版本是 5.8 final。我首先通过以下方式安装了相关的 Linux RPM
yum -y install unixODBC-devel
yum -y install libdbi-dbd-mysql
yum -y install mysql-connector-odbc
我的详细配置文件如下：
/etc/odbc.ini
[asterisk-connector]
Description = MySQL connection to 'asterisk' database
Driver = MySQL
Database = asterisk
Server = localhost
UserName = root
Password = mypassword
Port = 3306
Socket = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
# Driver from the mysql-connector-odbc package
# Setup from the unixODBC-libs package
[MySQL]
Description = ODBC for MySQL
Driver = /usr/lib/libmyodbc3_r.so
Setup = /usr/lib/libodbcmyS.so
;Driver64 = /usr/lib64/libmyodbc3_r.so
;Setup64 = /usr/lib64/libodbcmyS.so
FileUsage = 1
/etc/asterisk/res_odbc.conf
[asterisk]
enabled=>yes
dsn=>asterisk-connector
;dsn=>asterisk
username=>root
password=>mypassword
pooling=>no
limit=>0
pre-connect=>yes
当我使用“isql”命令连接 MySQL 数据库时，它工作正常
但是当我在 CLI 中启动控制台时，输入命令odbc show。它显示没有这样的命令“odbc show”
我在这里很困惑，不知道如何解决它。我用谷歌搜索，发现有人建议通过加载 res_odbc.so 模块来解决它。因此我浏览了文件 modules.conf 并将这些修改添加到文件中
autoload=yes
preload => res_odbc.so
preload => res_config_odbc.so
修改后完整文件如下" /etc/asterisk/modules
;
; Asterisk Module Loader configuration file
;
;
[modules]
autoload=yes
;
; Any modules that need to be loaded before the Asterisk core has been
; initialized (just after the logger has been initialized) can be loaded
; using 'preload'. This will frequently be needed if you wish to map all
; module configuration files into Realtime storage, since the Realtime
; driver will need to be loaded before the modules using those configuration
; files are initialized.
;
; An example of loading ODBC support would be:
preload => res_odbc.so
preload => res_config_odbc.so
;
; As FreePBX is using Local as the channel for queue members we need to make sure
; that pbx_config.so and chan_local.so are preloaded. If not, queue members
; will be marked as invalid until app_queue is reloaded.
preload => pbx_config.so
preload => chan_local.so
;
; Uncomment the following if you wish to use the Speech Recognition API
;preload => res_speech.so
;
; If you want, load the GTK console right away.
; KDE console is obsolete and was removed from Asterisk 2008-01-10
;
noload => pbx_gtkconsole.so
;load => pbx_gtkconsole.so
noload => pbx_kdeconsole.so
;
; Intercom application is obsoleted by
; chan_oss. Don't load it.
;
noload => app_intercom.so
;
; DON'T load the chan_modem.so, as they are obsolete in * 1.2
noload => chan_modem.so
noload => chan_modem_aopen.so
noload => chan_modem_bestdata.so
noload => chan_modem_i4l.so
; Trunkisavail is a broken module supplied by Trixbox
noload => app_trunkisavail.so
; Ensure that format_* modules are loaded before res_musiconhold
;load => format_ogg_vorbis.so
load => format_wav.so
load => format_pcm.so
; format_au.so is removed from Asterisk 1.4 and later, remove ; to enable
;load => format_au.so
; This isn't part of 'Asterisk' iteslf, it's part of asterisk-addons. If this isn't
; installed, asterisk will fail to start. But it does need to go here for native MOH
; to work using mp3's.
; Note that on a system with a high number of calls, using a compressed audio format for
; musiconhold takes CPU resources. Converting these files to ulaw/alaw makes the job
; much easier for your CPU.
load => format_mp3.so
load => res_musiconhold.so
;
; Load either OSS or ALSA, not both
; By default, load no console driver
;
noload => chan_alsa.so
noload => chan_oss.so
;
noload => app_directory_odbcstorage.so
noload => app_voicemail_odbcstorage.so
完成此操作后，我返回 CLI 控制台重新加载 res_odbc.so。但它未能找到 res_odbc.so
我需要有人给我解决 ODBC 连接问题的提示。