0

在我的 AuGraph 中，我有以下情况：

采样器 --------->

                mixer ----> remoteIO

6个回调----->

AudioUnitGraph 0x311E02A:   
Member Nodes:   
   node 1: 'auou' 'rioc' 'appl', instance 0xc66c020 O       
   node 2: 'aumx' 'mcmx' 'appl', instance 0x598f20 O    
   node 3: 'aumu' 'samp' 'appl', instance 0x59ba40 O    
Connections:    node   3 bus   0 => node   2 bus   7  [ 2 ch,  44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved]  
                node   2 bus   0 => node   1 bus   0  [ 2 ch,      0 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved]   
Input Callbacks:    {0x1a7bb1, 0xd1f5648} => node   2 bus   0  [1 ch, 44100 Hz]
                    {0x1a7bb1, 0xd1f5648} => node   2 bus   1  [1 ch, 44100 Hz]     {0x1a7bb1, 0xd1f5648} => node   2 bus   2  [1 ch, 44100 Hz]     
                    {0x1a7bb1, 0xd1f5648} => node   2 bus   3  [1 ch, 44100 Hz]     
                    {0x1a7bb1, 0xd1f5648} => node   2 bus   4  [1 ch, 44100 Hz]     
                    {0x1a7bb1, 0xd1f5648} => node   2 bus   5  [1 ch, 44100 Hz]           
                    {0x1a7bb1, 0xd1f5648} => node   2 bus   6  [1 ch, 44100 Hz]

一切正常，但格式不匹配。回调工作和采样器听起来很迷人。

现在我尝试像这样插入混响：

样品->

混音器 ---->混响--> remoteIO

6 呼叫-->

我得到这张图：

AudioUnitGraph 0x313402A:
  Member Nodes:
    node 1: 'auou' 'rioc' 'appl', instance 0x569060 O  
    node 2: 'aumx' 'mcmx' 'appl', instance 0x56a210 O  
    node 3: 'aumu' 'samp' 'appl', instance 0x56b200 O  
    node 4: 'aufx' 'rvb2' 'appl', instance 0x56ba30 O  
  Connections:
    node   3 bus   0 => node   2 bus   7  [ 2 ch,  44100 Hz, 'lpcm' (0x00000C2C) 8.24-bit little-endian signed integer, deinterleaved]
    node   2 bus   0 => node   4 bus   0  [ 2 ch,  44100 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved]
    node   4 bus   0 => node   1 bus   0  [ 2 ch,      0 Hz, 'lpcm' (0x00000029) 32-bit little-endian float, deinterleaved]

    Input Callbacks: (the same as before)

和错误：AUGraphInitialize 错误：-10868 *

连接代码：

result = AUGraphConnectNodeInput ( processingGraph,
            mixerNode,         // source node
             0,                 // source node output bus number
             revNode,            // destination node
             0                  // desintation node input bus number
         );


result = AUGraphConnectNodeInput ( processingGraph,
                                                                    revNode,         // source node
                                                                    0,                 // source node output bus number
                                                                    iONode,            // destination node
                                                                    0                  // desintation node input bus number                                                         );

我还尝试统一混响和混音器的格式：

AudioStreamBasicDescription asbd;
UInt32 asbdSize = sizeof (asbd);
memset (&asbd, 0, sizeof (asbd));

AudioUnitGetProperty(mixerUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Input, 0, &asbd, &asbdSize);
AudioUnitSetProperty(reverbUnit, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 0, &asbd, sizeof(asbd));

我究竟做错了什么？抱歉格式错误，今天加入。

4

1 回答 1

3

我遇到了同样的问题，但发现我必须从混音器输入的其中一个单元复制 ASBD，并将其设置为混音器单元的输出范围。

AudioStreamBasicDescription asbd;
UInt32 sz = sizeof(asbd);
result = AudioUnitGetProperty(someUnitBeforeMixer, kAudioUnitProperty_StreamFormat, kAudioUnitScope_Output, 0, &asbd, &sz);
NSCAssert (result == noErr, @"Unable to get ASBD. Error code: %d '%.4s'", (int) result, (const char *)&result);
result = AudioUnitSetProperty(mixerUnit,
                              kAudioUnitProperty_StreamFormat,
                              kAudioUnitScope_Output,
                              0,
                              &asbd,
                              sizeof(asbd));
NSCAssert (result == noErr, @"Unable to set ASBD. Error code: %d '%.4s'", (int) result, (const char *)&result);

如果您知道它应该是什么格式，则可以手动设置它，而不是复制 ASBD。

于 2012-10-05T14:25:28.427 回答