根据google和ldd3的一些参考，我正在尝试学习如何在linux中编写设备驱动程序。我可以在下面插入模块，但是当我尝试在应用程序中打开设备时，内核崩溃了。
代码和构建步骤如下：
#include <linux/module.h> /* Needed by all modules */
#include <linux/kernel.h> /* Needed for KERN_INFO */
#include <linux/init.h> /* Needed for the macros */
#include <linux/ioport.h>
#include <asm/io.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/param.h>
#include <linux/fs.h>
/* =============== Constant Definitions ============ */
#define SERIAL_IRQ 4
/* =============== Variable Definitions ============ */
static int SER_MAJOR = 0;
int ser_open(struct inode *inode, struct file *filp);
int ser_release(struct inode *inode, struct file *filp);
irqreturn_t my_ser_dev_isr(int irq,void *ser_data,struct pt_regs * pt_reg_var)
{
printk("\n\n ------- INTR raised -----------\n\n");
return 0;
}
int ser_open(struct inode *inode, struct file *filp)
{
if(request_irq(SERIAL_IRQ,&my_ser_dev_isr,1,"my_ser_dev_intr",NULL))
{
printk("\n interrupt req failed\n");
}
else
{
enable_irq(SERIAL_IRQ);
printk("\n!!!! ..obtained the requested interrupt and enabled\n");
}
}
int ser_release(struct inode *inode, struct file *filp)
{
disable_irq(SERIAL_IRQ);
free_irq(SERIAL_IRQ,NULL) ;
}
static struct file_operations ser_fops = {
open: ser_open,
release: ser_release
};
void *p = NULL;
irqreturn_t my_ser_dev_isr (int, void *, struct pt_regs *);
static int __init hello_start(void)
{
int ret_val=-1;
int result;
printk(KERN_INFO "Loading hello module...\n");
printk(KERN_INFO "Hello world\n");
result = register_chrdev(SER_MAJOR,"SER_DEV",&ser_fops);
if(result < 0)
{
printk(KERN_WARNING"Can't get major %d\n",SER_MAJOR);
return result;
}
if(SER_MAJOR == 0)
{
SER_MAJOR = result;
printk("SER DEV Major Number : %d",SER_MAJOR );
}
return 0;
}
static void __exit hello_end(void)
{
// free_irq(SERIAL_IRQ,NULL);
//release_region(0x0031,1);
printk(KERN_INFO "Goodbye Mr.\n");
}
module_init(hello_start);
module_exit(hello_end);
模块的生成文件：
obj-m := hello.o
default:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
用于访问的应用程序如下：
#include <stdio.h> /* test.c */
#include <stdlib.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <errno.h>
static int dev;
int main(void)
{
char buff[40];
dev = open("/dev/my_ser_dev",O_RDONLY);
if(dev < 0)
{
printf( "Device Open ERROR!\n");
exit(1);
}
printf("Please push the GPIO_16 port!\n");
//read(dev,buff,40);
// scanf("%s",buff);
printf("%s\n",buff);
close(dev);
return 0;
}
insmod 给了
[ 3837.312140] Loading hello module...
[ 3837.312147] Hello world
[ 3837.312218] SER DEV Major Number : 251
然后我使用 mknod /dev/my_ser_dev c 251 0 创建了特殊文件 执行应用程序导致内核崩溃。我正在使用 UBUNTU 3.2.0-23-generic-pae。